 So that's the slab protected. I've loaded the block out. Well, that's got the first mixie. We've had the laser up checking levels So we're not working to now. We've got our measurements to go up The winder on top actually two brick wide, so we just need to find a position then Storm madness is coming tomorrow, so we've lined up an inside job doing a linky I didn't press record then. I just took that panel out all by myself. I don't think you did. Well, I got it out I'll put it down right We haven't done the intro like we usually do with H24 now. We've got 10 to 8 So we'll give you a quick one that shifts today's work Got a bit of tidiness to do there with the fence panel. So even though the fence panel is going back Pick the boards up from Sirius this morning, Sirius and Stuart. So that's the slab protected I've loaded the block out. Well, Alex got the first mixie. Well, let's put half mixing to use the alpha bag up Remember to stand in the board so we now got four boards on stands Super rhino boards on our rhino stands and some other green ones that you're not really that impressed with So yeah, we're gonna get the line set up. We're gonna put a straight edge up on each door with our rhino clamps So we're just running into it not plumbing every course then just to save a bit of time and crack on Where the forecast isn't brilliant meant to go a bit iffy at the middle of the day But hopefully we'll get away with it and tomorrow is Storm Agnes, so we're trying to get a job on On the inside tomorrow doing a lintel and a door opening So we'll see if that happens. You'll see the video if it doesn't you won't Well, you will see the video because we're doing it we just don't know when So there you go. All the boards are set Lines are up. Just got a few to run in there to raise the lines. So while Alex is getting them in I'll get these Profiles up So Let's get going. I'm gonna mix in after you've been the toilet. I've just stopped at the bricks Put my trestles up and we hop up top. So I'm not bending massive help then Yeah, everything's good Stabilize them so the profiles aren't pulling over Just keep going. There's a window on this one. That's it. Just carry on. Yeah, I've got the two profiles up for the doors It's just a bit buff up to them. That's great. I think of anything else I get back to you So let's find somewhere new to put you for time lapsing This is spinning. Just getting it wet up We've had the laser up checking levels So we're not working to now. We've got our measurements to go up Let's go to the incline level Looking good, these bricks are nice Alex sent So we're just gonna keep going so we can't reach anymore and then see how we get on. If we do get that far We'll jump inside I'm just gonna trace the pond round Work out all the cuts and get all the cuts done. I've got a window coming in one, two, three courses They'll just see there. I've got a pretty many tiny window ventilation Two brick wide So we just need to find a position then. A bit of jointing to do We crack on Where there's old in It's windy but it's keeping everything dry. So apologies if you can't hear me properly Once Alex is finished on his core, he's gonna get the motor in. He's gonna get me barrow soil first Just like that. We've been like a bit at the moment Lift me up a little bit as well. That's three. Thank God. Happy days There we go. Window set out As I say, it's only a WC window. That's why it's high up. It's gonna be little 450 by Roughly 450 square. So this is this is at my end. Done It's a couple of heights. I think we've got 18 on top of damp there So now we can get this all this And we're completely tidy up spotless because we won't be coming in here again We're gonna be working over and off the trestles from now on. Easy to easy for us to work from the inside for how many courses we've got left. We've got One, two, three, four, five, six, seven. Seven left on here. Yeah, then the pikes. Yeah Seven to lint light and then wall plates obviously gonna move it higher So, yeah, this can all be tied it up and done with we don't need to come back in here again We might might just take that out for access tomorrow. Sorry Thursday. We're not here tomorrow Store madness is coming tomorrow, so we've lined up an inside job doing a So That's open anyway, that one goes back tonight But we'll see if we need to take it out or not. We've got I've got a way through there But if it gets blocked you can always come round So I'm wiggling again. Sorry. Yeah, there we go Just once a few little I think that's causing bunnies pulling in Just tidied up and then it won't sponge you off Jobs are good I mean the clay commons matching them clay commons, so they're a good match for them But they're double the price them rascals Oh, yeah, I've got that and two and a half buckets in it I've got the first few down on bolster and then once I've got the pea size With the big Milwaukee saw we've got which just flies through these five lights Great block nice and light easy to cut very strong You can fix into them and the good thermal value There's nothing there's nothing to dislike about five lights Great blocks if you don't use them already start using them We forgot to do an outro again didn't we? Yeah, yeah Well, let's just say the job wasn't exactly kind to us. So, um doing an outro was kind of the One of what wasn't on our priority list Yeah, so we did make some good progress at least but that's the end of the video So thank you all very much for watching if you enjoyed be sure to give a Thumbs up and if you need to the channel you want to see more hit subscribe and tap on that bell It's meant to be a bell That way you'll always know when we upload which is a massive help and A good way to support the channel and if you want to support the channel any extra ways you can Do the super thanks option under the video or there's a link to dad's paypal not necessary but appreciated nonetheless every little bit towards Dead's a Trust fund for his hip. We've got some very kind donations. Yeah, so everybody who's been donating very very much appreciated. Thank you So this has been lounging about and I'll live in room with steven alex and we'll see you the next one