 Come on in you're just in time to see my next project a lot of Polaris make them 500 And she's a real basket. I'm gonna tear this down start the fish show you guys what to do This thing has some major issues. It's got Set this down here It's got a head gasket blown so I'm gonna show you how to tear that apart got break issues Carburetor needs to get rebuilt So Have a seat enjoy the show and welcome to titanium man's garage So I picked up this thing and I guess the deal is that last owner had a Switch for the fan Apparently his fan wasn't working. So he just had a switch every time you write it kick it on fan would flip on big mistake Kids his kid jumps on it takes off with it. Guess what? I forgot to turn the fan on blew the head gasket, so This is a Magnum 500 and I posted a video on how to replace the cam on this So I'm actually gonna help you guys out. I'm gonna tear the stone from start to finish. You can see how I do the plastics This is the stripper everything down clean everything up. I'm gonna take the The head off Actually, I'm gonna do a little compression test, but my plan is While I'm that far Let's make this an HO so apparently all you need to do is get a HO cam and the HO carburetor and This little bad boy should really fly ugliest sin right now But by the time I get done with it Should look pretty decent All right, so Stay tuned and I'll start tearing it apart and you could check it out Choke cable is missing. Uh, I don't know where that went. I got another choke cable Same thing nut spins off comes off the choke pulls out the other way They won a tear down. I will tell you what I found You have to tear in this apart and there is a lot of a lot of stuff wrong with this bad boy I took the carb off This thing looks like it's been sitting for years. I mean see all that green gunk in there That's a bad gas So I was gonna put a HO carb on anyway. It's gonna get replaced, but yeah, that's number one I Did a compression test they got good compression So I guess my next project is our next step I should say is I'm gonna tear that rocker cover off and See what that cam looks like, but Yeah, she's uh She's coming apart so we're gonna get a rocker rolling and hopefully get this bad boy running Next up is breaks um got the tire off the Break pads seem to be in fair shape, but I do have a brick pad set Another thing missing is the brake lever. I Don't know how this guy stopped. He must use the back foot breaks So I am going to replace that I have a I Used one sitting here. I got from buddy mine. Yeah, pretty lucky. He parts these things out. So and You can see here That line goes all the way down to the junction box. That's all pretty rusty Sure, that's probably why it didn't work So I'm gonna rip that apart take them screws out and replace it and then bleed the brakes All right, so for the moment we've all been waiting for I got this thing all rebuilt back together Everything up paint it everything up. We're gonna fair it up. I'm gonna show you how well it runs Check this out Turn it up. You know tweaking tweak the carbons. She'll be ready to go Okay, so got the engine running. I've got the Brake handle going on here bricks are tight. We need to get rid of the ugliest we got some Russ going on here all over the place so I'm gonna go ahead and Clean everything up want to paint everything Make it look pretty so Don't scare away any customers when I go to sell it. So I'll finish up clean up very nice Painted that ugly blue just turned out sharp. I paid 700 bucks for this I got 60 bucks into it about 10 hours of labor and I'll sell this for about 1,700 bucks, but you enjoyed the show subscribe to my channel if you like the video hit the like and You know if you've got something you need to fix check out my channel. I got plenty of Polaris repairs on there. Thanks for watching till next time