 Hey guys she ever 1,000 here with a new toy. Let's check it over together Okay, guys. That's what I got. I had an old Nissan two-cylinder eight horsepower Outboard engine At the boat motor I didn't really have it for sale, but a guy stopped and asked me about our boat over here and of course, I told him it wasn't for sale and We got to talking and he said he was looking for a boat motor That's why I got one if you're interested in it, you know needs a little work but I guarantee it'll run hanging right over here and He liked it and he was talking some money. I said, well, you know, I'm up for a trade on it because it really wasn't for sale, so Asked him what he had and he told me named off a couple things and so I was like Yeah, I'd be kind of interested in that little 50 It's a little 50 cc 49 cc, whatever. I think it's a 50 But uh, he said yeah, I saw go get he went and got it and now I've got it so We need to check it over first thing you got to do. I Was taught a long time ago before you start something make sure it stops. You got to stop it So let's check the brakes first and yeah okay, so It's in neutral. It's a little three-speed And all the gears are down on it on this one You go all down no up when you're in third gear you go down again and I guess you're a neutral you can shift up, but So like if you keep pushing down it'll it'll finally go into neutral So that's kind of cool But once you're in third gear, I think you can pull up on it and put it in second I'm not sure about this one. I don't even know what year it is but Let's get a battery set up and I got one sitting here from the video. I did earlier So I'm just going to give it a shot and let's see Bruno you don't know how to work on that. Let's see if we can See if this thing will fire up for us. All right So let me get you in a stand Okay guys we know For a fact that the That the brakes work So let's hook this Up to this battery and see if we can get it to crank over And if we can They won't do something different Let's see. It doesn't have a key switch. So I Don't think the button is going to work, but let's try the button out so About that key switch. We can't use the button, but let's hook it up to the directly to the starter That thing ran that thing ran guys Holy crap don't even have a tank on it. Must have some fuel still in the Still in the bowl of the carburetor All right. Well, let's do something here. Let me zoom me in a little bit. I got some mixed fuel right here What we're going to do, so we're gonna We're gonna put some gas down in here Holy shit, I Love it when stuff like that happen that carburetor looks good guys Get this fuel mix here try to get something to get down into the bowl Put some down in there. Let's see what happens He said it run And I suppose long as it's not locked up. Well, it doesn't have a Kickstarter or a pool start It's just electric start. He gave me the battery With it, but of course, it's no good. It needs a battery and key switch and He says I can guarantee you it'll run That's well, you know, you didn't hear the the boat motor run That's well as long as it ain't locked up. I'm good with it. I figured if anything I can sell some parts off So Let's back you out here Let's see if we can get this Awesome well, okay, so We've got the gas tank for it there, but he said It's missing the pit cock That's where the shut off goes. That's where the fuel line goes But I'm gonna see if I can't rig up a tank or something on here small tank You know maybe out of something a little weed either tank or something and let's see if from Let's see if we can get it to run longer than that So Yeah, let's let's see what we can do Okay, guys, so what I did I poured some gas in the fuel line and Started running out the overflow hose. So I'm thinking the The float is stuck in the carburetor. So let's pull this carburetor off of here I'll zoom you in a little bit so you can kind of see what's going on. There's the carburetor and There's the bowl right there Let's pull this carburetor off. All right, let's take it over on the bench and we'll pull the ball off of it And see what it looks like inside there. Okay guys Back let's pull this bowl off of here Now what I did was I blew through the line and turned it upside down and it stopped so it might have just been Just had a little piece of dirt in it But the bowl was full the the bowl was full had fuel in it. I'll be careful because I don't have a Another gasket to put on this by break it. So I got to be careful rubber gasket there You got to be Real careful with that. There was something in there Yeah, it's a little while was it so blurry. It's got some gook down in the bottom of that See that's kind of sticky right there And right there so I think that was holding it down so I'm going to spray this out clean that off the bottom of that and And We'll go from there. Okay guys. So what I did I got my carburetor cleaner out. I took the hose off this it's just some Just some gook in there It turns into like a Almost like a lacquer like a paint thinner type thing. So we're going to set it in this bucket I'm not going to do the whole carburetor because I don't think it needs it We're going to leave this set in here for about half an hour In the meantime, I'm going to clean this off the off of the float and make sure there's nothing in it In fact, I think I'll just take the float out. You just all you do is push this pin I know you guys can't see much through this camera, but Monkey used the I gave her a good one to take with her to her grandson's He had a His little graduation thing today. Let's go ahead and pull that off of there Plus that that'll let us know if it's leaking or not. So It's just a little pin. You just push this through and pull the pin out this side Now your needle valve in there. You don't want to lose it. There's the little needle valve Now we're going to set this in here and see if it floats and it's floating see that So kind of dip it down in and make sure it comes back up And it does so there's no holes in it. Usually these plastic ones are pretty good See that that stuff's coming right off. So let's leave that stuff sit in there for about 20 minutes to half an hour and we'll see We'll see how good it how good it turns out I need to give me an ultrasonic cleaner that way I can do a whole carburetor if I have to but all right, let's leave it set and We'll be back in we'll throw this back together throw it back on the bike and Feel the boa. See if it'll run Okay, guys This out came out. I blew it all out with compressed air. I also Took the jets out that jet in that jet. I took them out clean them as well So Get this back in here It shouldn't have any issues now it's in there Now when we turn it up like this, we should be able to blow through it and we can turn it like that We shouldn't be able to and we can't There's that. Let's get this back on here. It's like that. I wasn't able to come up with a I wasn't able to come up with a tank But I figure once we fill this bowl up With fuel it should run I'm gonna go over and I'm gonna throw this back on it's just the Just everything's backwards. It's just the two bolts, you know, and then your your slide So I'm gonna put this back on And let's see how it runs with the bowl full of fuel All right, fill this up with some fuel. So guys, there's the new toy Should be able to make a couple bucks on it. I'm going to get a tank hooked up and Let it run for a little bit needs run I checked the oil the oil was fine So run it through the gears and see what's going on and make sure transmission is good And we should be good to go so more on this later. Thanks for watching guys. Shea bear the myth man legend I'm gone for now. Take care