 What is up everybody? Welcome to the edge of tech. My name is Jim and We're here to do a live stream tonight. Let me know if you guys can hear me, okay? Excuse me if the volume is okay. I apologize this whole head cold stuff is kicking my butt I got the vitamin water today. I'm gonna rock that out We've got a whole thing of regular water, so we're gonna rock and roll through the X-Tool D1 Justin 3d. Hello, how's it going G ready Prince? I think it's a laser. You're right on that one Now I'm found how you doing your first I think Conan how's it going Russell from Alabama? What's up one raz Reginaldo, how's it going Dave Williamson? How's it going the coloring is spot-on? Mike never let the machines win what is up? Yes, it is the let's see this is the this is the zero sugar kind, but it's rise. It's orange So orange. Yeah, excuse me, man. I'm the Now I just like the congestion and stuff started and you know how that works. It stinks. Oh loha from Hawaii How's it going Tommy? Blasto's in the house Dan Adams. What is up? I Could get you all the vitamin water you want. I like it Let's rock man. Perfect Your buddy didn't I say this every every time every single time man. How's it going man? Yeah, I you know we had these I get in my Costco and my wife is not fond of the orange flavor So I was like, let's do in this blast. Oh absolutely Murph finally announced their dates June 24th through 26th And we will be there I'm definitely gonna do my best. We're gonna be there We have a lot of stuff. So I say we like I have a mouse in my pocket or something But I have a lot of stuff coming up on the channel that is super cool. I'm super pumped about some stuff we Whatever I have coming up And I am I'm very excited In the next couple months where where this is gonna lead I you know, I'm on a goal. I want to try to hit a hundred thousand subscribers this year on the YouTubes and To do that. I have to amp it up and to amp it up You know, I gotta gotta work on my game. Hopefully Murph isn't a swamp absolutely correct I hope Murph is not a swamp as well Vladimir how's it going from Slovakia? I was looking into buying this machine this morning Russell says Hundred K. Let's go. I like it. So I'm gonna put my I'm gonna leave my mouse over here case we need it. So this is the X-Tool D1 It is drawn on with crayons Right here. So this is what happens when I get into livery it sits in the living room when my wife brings it in because it was snowing and My little guy wanted to color with the crayons. He's Almost two a couple months away from being two years old and She let him color all over the box, which is fine. I mean the other side is the other side is clean X-Tool D1 X-Tool. Don't be mad. This side just looks, you know, it looks better Little a little class will call it Mike you're welcome one this one interests me awesome. I like the interest I like the interest we got in this one Let's not let's not slow down This is the X-Tool D1 I Don't know I should have looked more about it before we started this, but I didn't holy moley 335 Well, thank you so much for hanging out with us This has been repackaged, but yeah, thank you so much for hanging out with us we really appreciate that Paul Feney five dollars. Thank you so much Thank you. Thank you. Thank you in a second here. There we go and you Get a dancing taco Everything's backwards. I don't know. It's not nevermind. Thank you so much I haven't heard much negativity about the D1 I hope not I found this machine about two days after buying my tour ML Pro I should avoid it. I don't know about that The the laser master 2 pro is a solid machine. It's a solid machine And this one's more expensive. I think I I can't remember depending on what you get with it So this was resealed. I have no idea what's in here yet. We're going to find out the second here Paul Feney here from the 3D printing model market space group. I like it Well, welcome I'm going to do my best not to coffin everybody's ear tonight So in the in the top here, we might as well just pop this Camera we got a couple shots today You can kind of see what is in the top of the box There we go So there's a box here. I'm going to take that out Underneath the box. There is a actually a really nice pamphlet of something we'll find out in a minute There are If I spin this around and show you There are feet. It looks like feet or something here so They all screw together. You know what? I think these are risers um, let me do this here because That that stink 20 watt. Yeah, I don't know if this is the 10 or 20 watt. It doesn't say actually Let me look on the box. Maybe there's a sticker. I don't know what they sent me um This is It's the d1 it doesn't tell me we're going to find out together We're going to find out together So there are razors in here. So if I tip this up you can kind of see there you go You can see the shiny stuff there that right there are risers And they screw into each other To rise the machine up, which is pretty solid. I'm going to screw them together Um, I don't know if these are 20 watt or not. I I really I don't know that answer So we'll find out together I did see they had a 10 and a 20 Five yeah a five or a seven and a half. Yeah, so we um, remember where I put it over here Recently I did the the the other machine that was a dual five watt laser Let's see if I can get these things to not roll all over the world, huh? Whoa We'll see what happens. Otherwise, I'll move them. All right. What else we got I'm gonna take the top layer off There we go Top layer is off and this thing's pretty cool. How it's packed. It's like Look at that Packed in there like slotted in, you know boom boom boom slots Yeah There we go So in there I find the tools the bag of goodies here I think we're gonna use the bag of goodies You know what? How about this? We're gonna set the risers up like a genius here. Let me put those into the shot a little though No And I just realized that welcome to the show will be starting soon is on the bottom So let me get rid of that garbage Because I forgot to take it off One second. Sorry about that boom shaka laka Get that out of here There we go so On the right side, I just slid this out And it looks like they sent me There we go the rotary. This is the rotary That is awesome I am super pumped about this. I am so super pumped about that. I'm gonna leave that in the front Yeah, like this is this is the rotary tool. So they sent that to me. Thank you so much x tool It's cool jim. It's tough being a woman. Yeah, uh, it is sometimes Let's see might want to change the bottom scrolling text Yeah, I thank you. I appreciate I didn't even see that before I just did it. I appreciate that How much was it? um You know what let me look so I don't Uh There's a link in the description That'll take you to the amazon page But let's just go check out x tool themselves here official x tool done done done um x tool d1 Here we go Right from their page Meet our products The d1 is on here We shall click on it And the d1 as it sits is Holy crap This is a 10 watt Uh, I don't know if this is a 10 watt or not. We're going to find out in a minute, but The 10 watt on their site is $793 dollars Holy crap, but that also comes with the rotary. So that is the one with the rotary Let's see Oh, you know what hang on hang on hang on Hang on Let me uncheck all this extra stuff So they had like everything all the options checked on this page to give me that price So give me a second I lied. Nope. It is definitely 700 and so on their site as it sits right here $793. I think it was definitely cheaper than that on amazon But again, I don't know if that's for the 10 watt or whatever. There you go Just ordered mine from amazon 10 watt with rotary was 798 with tax. That's what I just saw on their website So it's very possible that that's how much it is So this came out Looks nice. I'm just going to pull all these out here And then we can get this giant box out of the way So get that out of here After taxes dice So there is The frame it looks like Man Telling you and then this is everything else everything else so Let's see if I'm going to pop the laser module out and right away. We're going to open this thing We're going to see what it says. Does it tell me? Um What it is here very loud crinkly crinkly static bag there X tool This is a 10 watt. This is a 10 watt. Let's focus in on that That is what I got here a little bit a little bit dark, but Maybe I can Maybe I can get it there. There we go You can see about right there. It shows you it's a 10 watt laser So there's our answer We got the 10 water the good old 10 water nice Okay, so it looks like uh conan Lloyd has one got it from amazon So this is the power supply here And in case you're wondering it's 12 volts 12 volts if you're keeping tabs at home I'm going to set that behind me for now Because we don't need it out front right now In this bag. We got some laser glasses some green laser glasses We have the usb cord So what I was reading about this One thing that I like about this so you can use The x tool app software on your computer, which we're going to have to do Until you upgrade the firmware Then it allows you to use it with light burn. That's what I'm looking forward to I like light burn a lot. I'd rather not learn another another Program and not only that but to be honest There's not a lot out there that beats light burn for for these lasers Yeah, the color of the frame is pretty awesome. It's very bright in here, but it's kind of that That gunmetal color Something that I another thing that I see that I like about this machine. I read about this before And once I get these rails out, I'm going to show you give me one second Make sure there's nothing else hidden So let me pop this over here So in our 3d printer world We use the wheels that run on the extrusion But these use wheels as well, but they're metal So if I get that up there close you can see that If it stops focusing on me Right here Some metal wheels right here. So that's pretty cool. I like that You know, I could have probably shown you this side was much easier. There we go So when this travels It uses the metal wheels instead of polycarbonate or plastic or whatever You know, I am pumped about this especially because now I know That we got the rotary tool Um, that's pretty cool. I didn't I didn't expect that so thank you so much x tool What's funny is I knew I was going to stream tonight And they reached out and said hey you're going to stream soon You're gonna go live. I've had this for a little while and I've been I've been I should have been live the last couple weekends, but I haven't been so Here we go Wiring harness is hiding in that one looks like The you can see it here the control Board and everything is there. Maybe even a wi-fi A little wi-fi antenna So that's pretty sweet I plan to buy with the rotary next week Nice if you do that, please Use the link in the description below. It'll use my amazon Affiliate and I will get a very tiny piece of that pie, but It doesn't cost you anything else that just helps the channel um And I I really would appreciate that so I'm trying to find a little So one of these I think is missing The little black cap here for the foot It's not the end of the world because I can put the other feet on it Here's a little rod we're gonna need But I just I just took out I just took out One of these uh Ends and I don't see it darn it. We'll see maybe it'll show up. Maybe it'll show up I'll show you what I mean in one second here So what I'm talking about Is in the bottom of here see how this one has a black rubber foot on it This one doesn't So this one will stop the slidey and this one won't So I'm hoping I can find that otherwise Not the end not the end of the world. It's not the end of the world Maybe it went flying I'll look around and see if we can find it But all right Oh, no, it's okay conan. I thought you said you were gonna order. I thought you I thought you said you already had it too But uh look in front of your desk something flew off when you shook the first piece of the box. Let's go look It might be Hey, whoever said that Who said that conan? You're the winner You are the winner and various very astute look at that That's what I like to see you have all feet accounted for thank you curled off the front of the table someone else said nice All right, so I'm gonna pop this bad boy open as it says X tool on it as you can see Has a lot of cool stuff in here. Holy giant manual. Look at how thick this thing is Oh Of course we get stickers I'm gonna drop those back in there Prop back over here so you guys can see The manual Um interesting I don't know there we go maybe so there is our manual and pretty pretty big But all the instructions are in here and we're gonna start building this bad boy right now So that's pretty cool Nice thick paper feels feels very nice for a manual Mike thanks man community teamwork. Yes, you guys are awesome conan. Thank you again Any more stickers trying to decorate the pressure pot? Ooh dice making That sounds like fun. Okay Let's just jump into this build right away Uh, I'm gonna get everything out here in a second list of items check We didn't miss a foot My hands are so dry today. I should have uh, I should have grabbed lotion before I came out here Here's all this is cool So they actually picture See if I can get you a shot of this because it's real bright over here but they actually picture and Oh, come on Here that's it There we go. You kind of see it there. They picture the screws and tell you what they are I like that. They picture all the parts Tell you what they are All the good stuff so I'm gonna grab something to drink here a little vitamin water number one You essentially put all the rails together Okay So let's see what we got here So we should have this one Looks like it goes here and then The one with the uh, stepper here Goes over here Like that like that so far then The thinner one with the feet This particular one here Looks like it goes Right there Man This is pretty slick and then The last but not least And say all right Um, not this one Not that one this one There we go. So which side is which That's gonna move a little there's a notch Well, I think it only goes one way I'm gonna go with this way but to do that I have to Oh, don't forget to align all the power ports. Yeah So there's power ports here They need to align in here. Maybe I can actually show you I'll spin this thing around so you can see and then I'll look at chat because I haven't looked at it in a minute here Because Steve what's up? All right, let's see What do you got there we go so This particular piece here I need to cut I need to cut that then That can go down a little but This is going to go here And then when you line up this side, it says line up all the buttons Everything in here So that's what we're going to do So when we do that The power button And your other two right here. Let me get let me do this There we go a little better right there So and then We'll keep rolling here guessing Hoping I didn't have to uh, nope good So that was step one so far Super easy super easy, right? Yeah, so far super easy. Um Press each joint to make sure that No supports hang in the air Okay Good Now take four m I'm sorry take holy crap a lot of them 16 m 4 by 8 bolts And we're going to put them in everywhere That can't be right Mother of mercy. Let's look at this Oh, yeah, look at that It says there's like 16 of them or something. So we'll uh, we'll start playing with this Let me grab those bolts here if I can Find them. Oh man. They sent me a ton of cool stuff to burn too, which is really cool Um Just got to find the bolts right here Russell, thank you. I appreciate that coupler some dog tags Some other fun stuff to burn. Hey, there's the bolts some zip ties. I'm going to put all this stuff over here Here we go. I look we got an sd card in there Man, my hands are so dry Yeah, it's looking nice so far. I mean very, um You can kind of see how it went together This this part if I'm not filming that took me what two minutes or something to set it all together like that Uh, not bad at all Now if I could get this done, that's it We're gonna rip the bag open my hands are too dry um We're in the heck is my mat where I put it I have a little uh magnetic mat That I would dump these in but that's okay. Not a big deal No screws left Oh jeez, so what size we've got? little whoo As I crash down in the background over here I'm standing on a mat like a pad in the floor because I'm in the concrete garage, right? and uh There's just a little ledge right where I just stepped all right So apparently We just start screwing everything together so It's hard to see but they show all a ton of screws here So we're gonna start doing that. That'll be fun I'm gonna start with I got my trusty t-handles I absolutely love t-handles by the way And it's not a project if I don't throw at least one screw so there you go For those of you, uh keeping track at home. What do you think of my last? A couple videos. I I'm trying a different style a little bit different style in the uh on the video front um Editing wise and and timing trying to keep things moving Uh, if you guys know me for a long time, you know, I'm very long-winded and yeah So, you know, I'm trying to Help that I'm going to put all the tops in and then come around the sides I'm going to turn this so you guys can see the side ones in a second here But Yeah, Russell so far so nice, man. I I mean there's there's a lot of good lasers out there. There is really now This one is a little more expensive but You know what so far So far not doing anything else but starting to put it together Like it. I am not printing anything. Actually, I there's a print Behind me that just finished before I came out here Squirrel yes squirrel absolutely squirrel No worries no worries so the videos I usually do Sometimes I get long-winded that one didn't sit down as nice as the other ones but um, but I've been trying to Slice and dice and keep it faster um This one here I don't want to yank it off the bed right now, but it's a 3d print bunny With the loops the droopy loops But they didn't really droop Which was super weird. I'm not gonna lie. They just kind of looped no droop all loop. What I got an idea Let me try something here I'm bringing in I'm bringing in the close cam here There we go Now you can see what I'm doing Kind of I remember a great chat with you at IRF. I think you just learned you're going to be a father uh Not long-winded at all. I probably yeah at IRF. That's right IRF 2019 True story true story, man That was uh, it was a fun trip. I'm super pumped to hopefully get back into those trips this year Starting with mirf. I believe june June 24th through Sorry June 24th through 26th. I believe is is is mirf this year One of the problems with doing it like this is I can't see if I'm lined up So I might have to I might have to slightly adjust there we go that one's going in I gave you a coin. Oh, that's right. I do remember that. I remember that Shakey cam that's how I roll if it's not shaky. It's not mine probably So each one of these corners had One in the top up here and it looks like these three here So in the interest of not shaking the cam so much I'm going to do that And just keep rocking and rolling while we talk nice Hba to see sergio's in the house sergio. How you been long time? No talk friend Love it Yeah, I am I'm so so pumped for uh I am so pumped for mirf and IRF this year lucat fields in the house l3d Hey, man. How are you good to see you? Luke was at IRF. Uh, Luke was at IRF 2019 as well Along with a whole bunch of other Whole bunch of other people and we had we had a blast. It was it was really so much fun and that was you know, right before all the crap happened, right But Hopefully this year we get back into get back into it Ooh, the cr scan lizard nice They offered me one I Did not take them up on that one. I don't I just don't have Didn't have the time right now. I have a lot going on here um That was weird So that one did not want to go in but we're We're gonna find out in a minute why but yeah, I uh, I didn't have time and I couldn't get it out fast enough um For the scan lizard, but I might you know, I might do one In a little while. I know they're they're rocking on that Kickstarter. Hey, Tony. How you doing? My last yeah IRF. I remember Mike. I remember meeting yet IRF 2019 like I said a ton of awesome people were there um Luke and I mean there was all so many people there. It was such a great event Um, we really we really did have a lot of fun Lindsay was there with me like someone someone, uh Conan said we had just found out that we are going to have a baby So that was cool Um We stayed in a hotel or a bunch of people were hanging out and we all We stayed up way too late took over their party room and That was a good time. That was a good time Uh again Murph if you have not been there it stands for the Midwest rep rep festival June 24th through the 26th this year. They just announced it um We're hoping it's not a swimming pool like last year But I should be there not sure if my I'm not sure if Lindsay and the little man are coming or not, but We'll be there for sure. So I believe I got all of these in there is a couple extras Let me just check up top up top So as you see This is a sturdy sturdy frame so far Let's see My life jacket to murph. Yes, that would be good idea dan Uh russell my buddy hasn't had any issues with his I was uh, I was disappointed it doesn't have limits which is I'm with you my daughter just asked me to say hi She met you and Lindsay then too if you remember Six foot tall girl who was walking in a boot Uh to be 100 honest, I don't but hi. How are you? And it's good to see or talk to you like this at least I manually moved to home. Okay So I really love limit switches. I that's one thing I really like about the or tours It's one thing I like About that uh that What was the last one I did over there? The x7 I think um You know, I do I I really do like the the limit switchers. Okay The screws are used to set the tightness of the timing belts do not fully tighten them Spin them clockwise to tighten spin counterclockwise to loosen Cool. So there's two m4 by 25 bolts And I'm gonna we're gonna do a better view of this here m m4 What I say m4 by 25 Yeah I lied m4 by 15 m4 by 15 I do I have the uh make block What is that laser box pro? That's Sitting right over here. That's a co2 laser. So let me see which one this is so there's Okay, I got to pay attention. So there's two of the longer ones. That's what we need Perfect the two longer ones And then what we're gonna do Let me Let me shoot this over So they go into here And they're gonna be used As tensioners, let me see if I can really shoot I know the camera is probably all sorts of crazy, but There we go. So this is your belt tensioner here So when I screw this in Um We start screwing it in we should grab it and you'll start seeing that belt pole Nice I'm just looking at this one here Cool cool. So we don't want to screw it all the way in yet Because here we go because it still has to be able to adapt There we go. You haven't seen yours in two years. Why not? Oh, I think maybe you said a friend has it That's right I do have mine though. It's it's not bad. I use it um I use it from time to time. We'll say What is going on here? Um, I think this one's off. Let me let me get this thing out of my face here IRF is in Goshen, Indiana Goshen Indiana That's how it shows Interesting It goes around that one I just was uh, kind of curious how this belt worked Because it looks like it's super loose But I'm guessing it's we're not done. So hang on Oh sv o one pro beta. Nice I really did I like the uh I liked the sv o one myself. Oh, I'm sorry. Yeah, what did you say irf? Irf irf irf irf irf is on the east coast on the east coast So the next thing we're going to do is take the 4m 4 by 15 And drop the gantry on here. But what I'm curious about is how come this is not Tight somehow Am I crazy? That one has a stepper I gotta be I mean, I'm probably just not to the part in the instructions yet. Yeah bell air maryland. There you go Interesting I see what's up. I'm just not there in the instruction. So I'm gonna keep it going I'm gonna keep it going Trying to get ahead of myself. You know how that goes. Um, all right so Front of the machine. I'm gonna turn it towards me Bell air milling. Yeah about 30 minutes from Baltimore. Absolutely. We we fly we fly we flew into Baltimore I remember in 2019 I had a wedding The night before so I dj'd a wedding I packed up came home slept for a couple hours and then we left in the morning to hit the airport to fly that was That was crazy Excuse me. So this is going to go this way It's going to sit In the side of here like that I like it. So I'm going to grab One two three four of those little guys Oh, Andrew Smith any suggestions on websites to find good laser engraving cutting projects Um, man, there's I don't ever go to websites. I just There's a lot of really good facebook groups that That I usually jump in and look for project ideas and stuff like that um, youtube There's so many people out there now that that have lasers kind of like you know 3d printers and uh So I just kind of get ideas You know from from everybody out there that's doing it Facebook's my my favorite because People post all the time. They're posting everything they do Yeah, uh, it was really cool sanjay was a good dude For sure. He's definitely definitely missed um At at mirf this past year 2021 he was on uh on live So you could like jump on and talk to him and say hi and It was really cool. That was really cool He definitely will be missed too too soon for sanjay Etsy etsy is another great place for ideas. Yes 100% So we got those tightened Ooh, that's a good question. Is this available to buy in australia? 100% honesty. I'm not sure. I know it's on amazon if you have amazon Um Jump on and check it out. I'm sure x-tool delivers all around the world. It's just a matter of where Uncle jesse, how's it going man? I can't wait to see how this works me too So far it's working really good. I mean as far as build quality solid um If I jump over here, we can see a little bit better I mean this thing is pretty dang solid. It's not floppy or wobbly which I really like um Yeah, I'm pumped. I'm pumped for this one This is the x-tool d1 10 watt. This is the 10 watt one uh So we got that on we got that on great Um now it wants one more I'm gonna spin this around so you guys can see it. Oh pop this over here So if we look Right here There's a hole there for one more of the long ones and There's another belt tensioner in here. This is the screw you can see up here um So I really like That they they're using screws as belt tensioners. I'm not going to screw this all the way in because we want to wait Tensioner belt there I'm just curious Nice But I like that they're using screws. It keeps them out of the way and Keeps everything solid. Hopefully that won't move too much It's kind of like when 3d printers use the little knobs. I like those as well. It makes it easier, right? um So I dialed that one in Check Do not fully tighten Spin. Yep. Okay, great Drag the middle plate To make it closer to the rear plate So that's back here Excuse me Wants me to go upside down. We're going upside down with it So where's the little there we go? Yep There we go Let me I'm going to turn this this way so we can get a decent look if we need to jump in over here But it looks like we're going to put the rod in that goes right here That will actually drive the other belt um insert Grab that bar. Yep. Insert the optical shaft They're calling it an optical shaft fully into the bearing and tighten this coupler screws so that's this this right here there we go and They want us to See how the best way I can show you guys I'm going to take you I'm going to take you for a ride again here Maybe I won't turn it on until I'm over here though. How about that? There we go They want me to put it on to the stepper motor right here Excuse me so far same size allen wrench allen driver t-handle in my case all the way across the board Which has been a two and a half millimeter And I like that a lot. I like that. It's one allen wrench You don't have to mess around finding multiple Can't wait until you see the focus tool. I I kind of cheated and and popped it down without Knowing you the second ago. So this says push it all the way on Which is interesting uh goes against my 3d printing world here, but that's okay. We're doing it I'm going to leave a little bit gap because we don't want it to rub on that stepper motor And then let's tighten that bad boy in Check We're tightened right there Okay, next We are going to Well, what the heck it doesn't say Insert the optical shaft tighten the screws at the end of the coupler So in the step before that That I did not look at Is just pictures. There was no words Usually they've been doing words. So there's no words. It just pictures It shows actually dropping that shaft into the belt over here. So I'm going to do that as we speak Potentially Let's see. I just got to grab it What I'm trying to do You can kind of Kind of see right here So I need to get the belt All the way through Here I'm going to do this Just so you guys don't get sick. Here we go. I'm going to pull this tight just for a second We're going to flip this around Um Perfect. Yep And then I'm going to pull this through So this is probably so far the most Pudsy part. So that's not bad so far. It's just trying to get this belt through the dang Through the wheel here So, uh, let's see. Conan, you said you have one. It's not a bottle of it. I did the same with sex thing. Nice Um, hey, you have one. Um, tell me something Do you prefer the The the software that comes with it or do you did you go to light burn on yours? I know what i'm probably going to do anyway, but you know There we go. Got it. Whoo That took a minute We spin this around so you guys can see it better It's all about that All about the view Get that way over there now. We'll spin this back around Hopefully kind of even now i'm using a gopro for my third camera today So it is Kind of different. There we go So i got this belt free We're going to take This side here Put it on the belt And then it goes into a bearing Down in there That looks like I'll need to loosen my uh tensioner up a little bit There we go Into that bearing like that and then Into the coupler that, uh, I already tightened So let me fix that situation because I didn't I didn't I went to read that was my problem for once in my life I tried to read the instructions instead of looking at the picture And You know got me in trouble There we go So we're in there in the bearing We spin this camera around and make everybody sick You can see couplers in here Super bright a lot of blown out, but sorry about that I will tighten it down on that Tighten it down on that now. We are coupled We are coupled here. We're in the bearing on this side. We're good Next I'm not looking up. Let me see what we got here I use the laser box update the firmware burned my spoil bird pattern Because that the file download from the facebook group nice everything else as I burn nice Not getting that board out easily after rod installed. Nah, but all it is is this coupler So it's two Two bolts with the the allenrack driver and then everything comes out. So it's pretty easy Would this be a good setup for my first layer? Here's the thing You're watching me put it together as as much as everybody else Um initial thoughts build quality seems solid and tight But I've never used it. So I can't I can't tell you like hey, you should get this for your first one, right? Ender this one right here The under two pro solid printer. I've used it a while now And I could I could make advice on that but I've not burned anything with this yet So I honestly can't tell you like yeah, you should get this because It could suck I hope it doesn't and um conan says he loves his right? So there's that um And and he says yes my first as well. So there you go So, I mean so I mean he has it What's interesting is I just tighten this up And I don't feel like it went anywhere. Let me let me check something out here Dan wood is up old curmudgeon So I tightened this in It doesn't really have anywhere else to go dan. Are you going to mirf or you can try to get to mirf this year June 24th through 26th. I believe Like when I tighten this one, it's actually not even Oh There's actually a Bolt up here. That's tight too. So let's let's keep going. Okay. Which one is behind you? This is an end or end or two pro solid printer video coming out Not tomorrow, but next week Kaewoo lozbot anycubic Garbage seed maker in the back over there Seed maker Man, they're killing us They are killing us. Um, but this is the x tool d1 laser We're going to keep rolling so Nail those two steps next Looks like we need wire it. We wire it up Nice, I got it. I got to work on place to stay But we will definitely do that My plan to be there I think it's going to be awesome if if anyone can make it it is absolute blast June 24th through 26th It's in Goshen, indiana Uh It's it's going to be a blast if it's anything like the past years We get you know people from all over the world and we're actually as you know, as long as everything Maybe trends the maybe the way it's going right now, right? Maybe people will be able to come again and it's so much fun all right wiring tips The wiring tip just shows you which way to put the wire in there you go um Nice luke That would be cool. That would definitely be cool so Looks like there's some zip ties It really It just shows you a wiring tip Let's see Where does this one go? Okay. It looks like it goes from the stepper in the back Uh over to the board That must be this one here So this one looks like it goes Let's see From here over to here So it doesn't tell you There's a yellow end and a white end It doesn't tell you what's what but one side is much larger. So you should be able to see That is the stepper motor side There we go. The white end goes into the stepper motor there um yellow looks like It goes into One of the supports here Oh, there's yellow. I see I'll show you this here now that I saw it Because this will be kind of easy to show you Without making you sick. Hopefully There we go Colored now that is a cool idea Colored label remember I said there's a yellow and a white end the yellow goes into yellow I like it Smart it makes it uh easier for people who may have Not wired a board before if this is your first time Or anytime just like this. I mean Unless they had it the wired there we go Now you can see these holes here too Right here and right there those are for zip ties to hold that cable in Super cool, man super cool So that that is the first Of many wires. Let's see what we got next here It looks like you're supposed to zip tie that right away. So we're just we're going to grab our zip ties They give us a pack of zip ties here And I'm going to use three like it says I'm going to bring this down There we go Let's see if we go to here here Get this camera out of your way I love having that third camera. I just got to Actually use it more often So This is really cool. I really Appreciate the built-in cable management Not too tight. You don't want to crimp it but tight enough to keep it away from your bar here So we're going to do the same thing here I do I do appreciate this I it's the To me It's small things like this that really help Uh the experience the overall experience because Yeah, we can zip time anywhere we find spots to but it's cool that they built in the spot It's cool that they built it into the instructions You know It's just little details little details And then I'm going to take my trusty Creality side cutters here cut those off Make them a little tighter here. I want mine to go behind here. So we're going to do that But you can do whatever you want Just want to not see the the big bulky end, you know Still not tight enough to crimp it but tight enough to hold it there, which is cool Sneak in there boom That is pretty awesome So now what we have You can see the wire Runs along here it's zip tied in I like that a lot I'm probably putting a lot of emphasis on Stuff like that, but it's those little details, you know Little details here's to uh vitamin water Dan that would be cool That rolls pretty good on those metal wheels Excuse me now we take the harness here and It tells us which way to plug everything in which is cool on this one It appears to have one plug on this side And the board side has multiple What in the heck? I see what's going on Two seconds. So this is what I was trying to say so whoop two here One here And then one hiding way over here as well good old-fashioned good old-fashioned battery swap on my monitor screen here because We didn't do that before the show Oops There we go Now we're back up in business on the main camera Of course, maybe not. All right, come on. There we go All right, sorry about that switching over to Good old regular water There we go When in doubt change your batteries before the stream. Okay Yeah Nice. Hope I hope we see everybody there. I'm gonna I'm gonna try to hit them both this year So a lot of people don't know I I shut down my dj business at At the beginning of the year. I didn't book anything this year at all I'm not gonna so there's that and Yeah So that's all done now. I don't have to that's not in the way anymore not in the way For anything so I can do whatever I want Okay, I'm gonna spin this bad boy around We're gonna uh, let's see Go back over here for a second. You can see where I'm gonna be working red and white believe that's these two here I'm going with it That's my story. I'm sticking to it highly I don't know about this Nice went in nicely on that one so I um Yeah I'm pumped though. Murph. Murph is gonna be great Last year, uh, I think I brought like four or five printers and gave just walked around and gave them a way to people It was a good way to spread the love with printers that I didn't not going to use or I didn't have time for So That was that Just fixing that down there So now Yeah, the the plugs were interesting but we're going for it I believe this one's gonna go in To this one Let me get this straight though Yeah, we got some big stuff coming for the channel super pumped announcements, uh coming soon But I'm really excited for some stuff that we have coming on here That cannot be right Can it can it be right? Let me look. I mean it could be right I do wish they had a little better instruction on That is not right same plug different end, okay So the long end here is going to be Once I get it straight again, that's going to be for the stepper I believe the other one is going to be for the um What's it called the uh laser head? And I'm backwards again. I was I'm Interesting that's what I wish they called out a little better. I wish they showed The other end but it's it's pretty uh self-explanatory now that I I see it Where's that other stepper motor? Right here great so Yes, murph is going to be june 24 through 26 june 24 through 26 great So it appears It appears that there is more zip tie locations underneath for Uh for this so we're going to flip this bad boy over again I will Turn it like this Ah, I see right here Let's see what is that on here There we go So Right here Super hard to see in that isn't it there are a couple of zip tie locations so you can Um So you can get your Let's go this way. Let's go this way a little bit further away so you can Hold that there and then zip tie your cables in here so they don't get in the way I'm actually gonna Do this Oop swapped a little early there, but there now we can see A little better if I don't make everybody sick There we go See right here right here. I like it Those will hold that cable in there. So it's out of the way Twist it so the natural bend goes outside of the frame if If not it can get in the way of a cut Twist it I get you. I'm catching what you're throwing Twist it like that. Yeah, I like it. I'm not gonna lie. I may have had this for like a month and Needed to get I needed to get this done. I'm super pumped for this laser too Um, if I was not filming We would be long done with this build If I wasn't talking and paying attention and talking to everybody here It just happens when you uh Watch out for that belt down there. So when you you know when you're live streaming or filming or whatever it takes quite a bit longer To do stuff, but it's more fun you know There are some times when you just want to build something and not film it And then you just do But this is more fun. Here we go nice and secure here boom shaka laka as they say I don't know if they I don't know if anyone says that anymore really to be honest Okay excuse me All right, we got that zip tied Now the the last piece of the puzzle is actually the laser head We're going to flip this back over again thing feels pretty dang solid uh Pretty dang solid for sure so Laser head There we go what's in right there And I want to come around the back. I think I'm going to come around the back of it Yep, so basically If I can I'm just going to take and drop that in there Carefully maybe Okay, like I said, I'm just going to drop it in there right This is they call it a 10 watt So yeah, and my I'm going to pull that back a little my uh My fingers are getting away here This is a kind of a tricky little there we go That one's that one's probably the trickiest cable to get in there And it's still not in there There we go Whoo, I can tell you there's a really good size fan at the top of this. Let's see you can see it in there It's a big fan. Okay Now we got that done. Let's get the show on the road here Check Zip ties check laser module Goes on check Then we're going to zip tie some cable. So We are going to put the laser module on like this We're going to use a little side screw to hold it And as we've been doing We are going to Zip tied in right here. Let's see something here There we go. Make it a little brighter. So we're going to zip tied in There's three holes here So do they go on the top right along the side right along the side? So they go in like this Go all the way to one side. Make sure you're all the way over there and then You can zip tie these in So if this is here, does it go? Nice Like it. I like it has to be dual to get 10. Yeah agreed agreed I'm going to do these loose for now like that Then I'm going to make my final adjustments before I pull them tighter Super pumped man. I'm excited Excited to get this thing going We're going for a little over an hour, huh? Holy crap It's been fun. So we're about where I want it on this side So I'm going to work on tightening that one down Then I'm going to come over here Same thing but not too tight. You don't want to crush your wires on these. Here we go Grab the old nipper like we've been doing boom boom boom Trash Now close up. Well closer up. Look at that. Look how nice that is Laser still travels all the way to the other side This one's still open So we can go All the way back here like this And I am going to have to rotate that So it gets out of the way of the prints like uh like you said Dad jokes is here Brian vines. I love it. He's got a new uh a new name called dad jokes, huh? Congratulations, Brian. I said it on hot makes money, but congrats on 50,000 subscribers on the youtube's man Congrats on that That is such a cool milestone Uh Big big congrats big congrats All right So we got that In we go. Whoa Hey, hey, thank you so much. Thank you so much Mama do I really appreciate that Had a little water there. Thank you. Thank you. Thank you Okay All we have to do now It says grab our sd card And we're going to pop that bad boy in So connect the x tool d1 software to use it we'll do that in a second Um, but it says to put the sd card in So we're going to do that on the board. It's Looks like it's in a pretty We'll show you where this is just so y'all can see it Get the uh This camera over here. Are we on? No Excuse me Yeah, I'm telling you this uh Okay, so this is our board here And They're right here Is where we were we want to put our uh sd card Can't really zoom in the uh the gopro, but Let me just see It does go face down as well Like that Clips in so it's right right there. See if I can get you a better Better view It's kind of hard to see in there, but it's right there Right there So that's where the sd card goes For those of you who are asking I know nobody was asking right so next thing it wants us to do is grab this software from The website So I'm going to rearrange a little here. We're going to walk through that. We're going to see what that looks like We are going to do it quick because we got to Lighting is always a struggle. Yeah, it can be depending on what you're doing especially I have two lights above and if I turn them on it's super bright, but the problem is it's super bright So there's that You can operate the tool by using the pc mobile app or light burn Go to support dot x tool dot com so Then there's a meet your x tool tells you what all the pieces are great There's buttons There's the it tells us to risers tells us how to put the risers on and where to plug in the Uh the rotary here, which I'm super pumped about I'm really pumped about that Some first impressions aftersales service Indicators Some troubleshooting very nice book Material box. Well, we don't want that so Let me move some uh camera stuff around here so I can see you Brian see you later, man. Have a great night. Thank you for stopping in congratulations again On 50,000 subscribers on the youtube It's super cool. There we go I'm just gonna grab uh The x tool tab here We're gonna drop it in I'm gonna share my screen So you guys can see what I'm doing and hopefully Hopefully we'll get this shared here. Okay share screen That'll be awesome if my mouse just died I love it. It definitely is Hopefully it's the mouse I can't even see your comments right now because I have them blocked with the screen that I am Covered up with this mouse on but I have a couple of Batteries right here and this other remote Don't surprise me. I've never changed those since I got this thing. So If that's what's really going on here All right, okay, I'm on Yeah, we're back in business look share screen boom boom boom There we go Come grow Rotary still in the box First world problems. Yeah, sorry about that Whoo. Hey have a great have a great uh morning 350 a.m Make you again for the donation to the channel. We really appreciate it. I hope you have a great morning. Great morning All right, here we go We are on the uh website here And I was just seeing if there was So there's a bunch of cool information high accuracy of video This shows the steel wheels a little better on that I think that's really cool We'll tighten up the belt. So let's not forget about that right Uh, this one right here. There you go two diodes in there to make a 10 watt That's what this one's running Um 0.08 by 0.08 millimeters compressed spot old curmudgeon was asking I think no coding needed. Yeah There we go ultra fine done done done Now if we just find the uh software it wants us to use let's see Learn more about the software I think we have to connect it using the software first Okay, great 1.2 good Windows this is Makes me a little nervous here dudes, but we're doing it Steel wheels seem iffy We'll find out we will find out Pretty quick here. I'm going to be plugging this bad boy in so I'm pretty happy about that We're going to get it um Install we're going to walk through the install here together Yeah, yeah, yeah great Let's launch it I'm gonna bring this over here laser box Blazic basic So I do have to say this is the same I have the other version of this for the co2 laser I have So I I know it a little bit um Let me get USB and power going here Let me take it off that screen so you guys can actually see What's happening? There we go. I'm gonna I'm gonna run to the front here I definitely use lightburn I am going to plug it in with the software that comes with it to upgrade the firmware Once the firmware is upgraded Then we can use lightburn So there is a disclaimer um If you read the page on their site I'm just looking at the brick here um It says you must upgrade to the newest version of the firmware Before you use before you can use lightburn. So we're absolutely Doing that because I prefer lightburn myself I might see how it goes though You know, it might have some built-in stuff For this that makes this stream a little easier, which we're going to do There we go so power power sits way over here like that and we got USB And I'll move this over so it's a little more in the center here in a second But this is a good size USB cable too by the way We got to be about four feet About four feet ish Okay I'm gonna grab something We got it plugged in Let me move this over some stuff out of the way here Get this over like that Excuse me Here we go It is powered on so It just powered on I could tell you this laser fan is big and loud Let's see Yeah here So you can hear that. Yeah, you know, um, there's some projects in laser box basic Man, I'm gonna start coughing again. Um, there's some projects in laser box basic that I think we're gonna play with because it They're probably already pre-programmed. Why not? This is laser box basic. I'm just gonna do this Actually, now let's do that Oh, thank you What do we got? Build the dad build 20 dollars. Thank you so much. Thank you so much. I really appreciate that I love your work homie You too home slice. I like home slice Um, so this over here is the laser box basic It says we're not connected, but let's do this And maybe now we're connected Hey the current firmware is too low Of course Let's upgrade that firmware We're gonna do this in real time Thank you so much again 20 dollars I really do appreciate that Man, check this out. Let's see Real quick while you're while we're waiting I'm gonna do this I'll pull that out. See that That's just uh Uh led, you know to line everything up That's pretty cool. That is pretty dang cool. There we go man The more I talk the more dry my throat get Uh, you you guys know if you want to support the edge of text channel, you can always donate a couple beans. Yes Thank you so much. I appreciate that Don't forget to hit the pay pals if you want to as well. Let me just make sure I didn't miss any I didn't yet Okay new firmware We're good We are good So Let's do some Hell we have for size So here's what i'm thinking It came with these sweet risers And we could use them if we want to but I also can lift the If I come down here, oops Whoa, whoa One second. This is all sorts of crazy Okay So The laser head here goes up and down You know like that I just want to put some under this So we don't burn the dang uh table So Oh man, if I can talk This is pretty thick. I might have to put a riser on but we're going to see in a second. I'm just going to drop this mdf underneath We're solid there We're going to get a better view in a second. Let's let's figure out what we're going to do first Um Let me bring that back in here so this is the Tool that comes with it the program that comes with it There's a menu you can import you check for updates. We already did Um check for firmware should be good Yep, we're good Hang on We got to reconnect Now we should be good with firmware. Let's just double check it All right, we're already to the biggest one the other cool thing is you can see down here You can drop it on your network. So it does have wi-fi That's pretty sweet. I'm not going to do that tonight, but you can if you want to Yeah, so I'm just going to leave that down there like this. So they gave me they gave us some stuff um It looks like they gave us some Some wood some leather a dog tag and then They gave us a whole Box Of cool of goodies here So if I remove that Then I do this They gave us dog tags and wood and some cylinders to test Uh some some silicone rings. That's cool silicone rings and Little pieces of wood and a lot of dog tags A whole lot of dog tags different sizes and stuff That's really cool Maybe we should do a dog. Do you guys want to do a dog tag to start? You got to put something in the workspace There we go. Let me go back here so I can actually see your comments. You got to put something in the workspace for sure Something's in the workspace boom okay I'm gonna I'm gonna do wood then we're gonna do a dog tag because why not but I'm gonna scoot this back So I can put the camera in there too so we can really get a good shot of whatever we're gonna do I'm not gonna burn a grid or anything like that right now We're gonna find out We're gonna find out they sent me a bunch of dog tags. So You know, we'll see To get all the options Oh over here. Yeah. Yeah, I get what you're saying. Um Trying to figure what I have I saw that So, let me uh, let me jump over here Let's see what you're seeing here Boom, I keep bouncing back and forth with cameras. I'm just jumping into a drive. I'm gonna go to my lasers Maybe there we go lasers I'm just grabbing something You know something I can throw on real quick Real quick like it's always when you're trying to find something fast that you don't find anything fast, right? Let's see Ooh, this will be fun Maybe There we go Let's do that Hopefully you guys can see that wrong light type. Yeah. Yeah. I don't know we're gonna find out So, um I got this this little tiny piece here of Whatever wood they gave me and it's roughly About two and almost two and a half that way By three and a quarter So here's here's a good one They did not say this thing didn't home obviously so, uh Let's see bill dad bill or or uh, or Conan do I need to home this somehow because it didn't do that Um, we got here millimeters I'm gonna shrink this bad boy down Now it's a millimeter. So what do we got 80 or we got 60 by 80 60 by 80 on this card here. So So Pretty close a little bit smaller 75 Oh bill dad bill. Thank you so much, man. I really appreciate that. I wonder if I just pop over here and go 60 there we go We'll go up Thank you so much. I really appreciate that. Thank you. Thank you. Thank you I manually moved mine to the upper left corner Excuse me Upper left. So that would be uh up here. That's upper left to me You don't need to home again tree is as unlock pick your image put your laser in place and go from there. I like it We're gonna that's what we're gonna do I'm doing this like super upside down too. So that's cool. But thank you so much, man another 20 bucks I really do appreciate that. Thank you. Thank you. Thank you. I I also like n stops. Um I Directional unidirectional. There's a lot of a whole lot of Options but let's see what we got here We'll go with bathwood I I'm I'm used to the other version of this which is a little bit different. Great. Great. Great. Great So does it do an outline? Yeah, let's try that We're gonna find out. I don't know. This is super weird. Uh, let me see what this puppy can do. I agree. Let's let's do this So I want to go to engrave. I would hit start So I'm gonna get this other camera going here Before we do anything So let's jump this Over to here. I think idiot prove. Yeah 100 percent. Um Let me So this this is a control pad here. There's a laser spot You can do framing Oh, that's cool. All right So this is like This corner, maybe Let's do that. So Uh, let me let me just do this. I need to make sure I can What you're seeing here There we go So I hit this frame button here. We're pretty dang close Um for being upset That's where it's gonna start from perfect for being upside down on me not upset. Um We're pretty close We'll do it one more time. I'm gonna watch it this time Oh, I'm a little low Little low I wonder if I should make it a hair smaller here. I'm gonna make this All right. Now let's check this out We'll do some framing Make sure we're all on there Pretty dang close All right, here we go. Oh, we got what 11 minutes are we drunk? I guess we should probably focus it right So there's this like a focus thing I'm gonna pop you over here so you can see this this one right here That I believe we bring it over like that We drop it down so it touches Don't want to forget that part. We lock the laser in we flip flip this back up It absolutely is a bottle opener by the way it absolutely is I'm gonna hydrate in a second while this is burning. I'm gonna grab my glasses too Because I don't want to be burning without that We'll frame it one more time Man, we're close For the first one. It's probably not a big deal. All right Now we're way off That's why we have a spoil board, right We're doing this 11 minutes is crazy though The closest bourbon hang on focus is already set. Yes um I'm just running to grab my glasses because Well, we need them and of course Need to grab a different pair Because they're not over here Well darn it I will find them while this is burning Here we go I'm gonna hit the play button on this you guys have been awesome We've been here for a what almost two hour hour 45 That's right. We're close enough Who there's a cylinder button 11 minutes is pretty crazy. Um I don't know what this means You can click the pattern to set the position of the laser relative to the pattern Interesting just make sure No now we're way off again Yes, I shouldn't have clicked that We're doing it 11 minutes is is super slow though um We should speak wonder if we could speed this up Yeah, let's go for it Engraving always takes time. Yeah. Yeah Jim is uh, is always off somehow. Yes definitely But thank you guys so much for the uh For the the um donations build that build. Thank you. Here we go And it's off While that's doing that i'm gonna refill my water Thank you so much There's a lot of smoke I shall now move my uh My smoke detector far away So I don't know if you guys can see this. Let's see if I do this Can you see the smoke here? Crazy, huh? I'm definitely not looking at it Uh, I'm just hoping that the Usually ventilate I usually have a An enclosure and I ventilate everything But I hope my smoke alarm don't go off While that's doing that I'm going to find glasses I'm also going to turn a fan on And blow this smoke out of here It's like it's like the batmobile Where a batman came and hopefully that helps There we go We're rocking and rolling the shield does a pretty good job of blocking everything and also It is all the way around. Thank you so much bill dad build. You are awesome Super cool. Thank you so much. I really do appreciate that All right, what i'm gonna do is uh, i'm gonna let this flow We're gonna let it go and see what happens here in a second. I am gonna I am gonna uh throw on some Very quick music for the next couple minutes while that's going and i'm going to run in and just get some uh more water What do we want? How about some uh Here we go I'll be right back. I'm gonna grab some water All right. I got the water. Thank you so much conan Lloyd and Bill dad bill. Thank you. Thank you. Thank you Bill dad bill looks like a uh It looks like your comment was was hidden because of the language but but I appreciate that Conan thank you so much Thank you. Thank you Hey, I appreciate it even better just hit that subscribe button. Let's get to uh, let's get to uh Uh 100 000 subscribers by the end of the year. Hopefully you guys can keep making it Looks like I was a little off But i'm over it But I gotta tell you this thing puts out the smoke the smoke. That's why you do a spoil board Interesting that it did this line way off here but Probably a setting problem not a uh That's probably a setting problem not a laser problem. You know because I saw that in the um I saw that in the Let me turn that off Pretty sure I saw That in the preview. So what we're gonna do next We're gonna do a dog tag so I got this these dog tags Uh I'm guessing they're stainless steel That's my guess But that's not bad Yeah, I probably it was a setting thing. I'm in a hurry and But it didn't look bad If I go back here look at that It burned in really nice it's dark I'm gonna do This dog tag here So if I bring this back to here, there's a dog tag. I'm gonna bring this laser over and drop the Excuse me, I'm gonna drop the there we go Drop the tool down So you set it on top so it's level Or focused. I mean not level I said definitely said level What software so far i'm using the software that came with it and we'll We're gonna do something super simple like Um I want to bring the software up in a second here We're gonna do something super simple Like a name or something like that Thank you so much you guys are awesome You guys are awesome. Thank you so much All right, here we go. So this is the software Build dad build. Thank you again. I really do appreciate that Someone asked me what software it is the laser box basic Software comes with it. I will be uh I'm actually going to be changing it over and using um light burn but For these tests. I want to use the software that came with it I want to use the material so you can go Into here. Oh, let's see here. I think There's a menu That is not what I wanted to do. Oops. There we go You can tell I've uh not played with this song. I just want to do a stinking text there we go Excuse me. We're gonna say teot for the edge of tech I definitely will have my glasses on font font font So let's scroll in here We'll go to stainless steel That's not what I wanted to do. Just want to adjust the font definitely a A learning curve when I've never used this particular version of This software before it's it's definitely different. Oh, I see the font over there. Okay teot I should build dad build how about we yeah, why not let's do that He's been rocking it. There we go Question is how I got a measure Let's see I like that idea. We're doing it build dad build gets a dog tag. It's super weird doing this upside down. I'm not gonna lie But I'm I'm here. Let's do this Tight yet. Yep This can only be 40 There we go build a dad build. There we go. We have tight face. There's a ton of different fonts Uh, I'm just gonna scroll and choose one. How about that? I did it pick up my actual font. So let's go see I don't think it did It did not because I have some fonts on here that I really like But it didn't pick it up So let's just do this I don't even know what it was. What did it pick up? Ah, that's that's boring San Diego. There we go So we're gonna go over here. We're gonna choose stainless steel It did for me off the double check I have some like like a harry potter font and stuff like that, but I didn't see it Okay, I'm on a mac. There we go. I'll double check when I can spend more time doing it But let's see what we got cooking here This one's gonna take a minute as well Holy crap Where's it going? Uh, no What is happening here? There must be a line. Hang on. There must be something going on I don't see anything else I'm gonna move this to where I want it Kona. Yeah, that's funny select We've got the stainless steel default with It can only be 40 we're gonna fill it. We're gonna do one pass Move the blue dot to the middle. Okay, we'll try that Let's try it So let me fire this camera back up so you can see what's happening Dude, it is way off. I gotta be Something's got to be crazy here So when I do the Let me fix this so it's not solo anymore But this one's solo. So there you go. I gotta have something crazy. Let me fix My screen here Now I can see it better I definitely did the frame and I moved the middle dot to the middle 40 oh 40 millimeter. Yeah 40 millimeters heights 11 millimeters San Diego fill. Yeah. Yeah. Yeah. What's this check here? Yeah, it didn't it didn't grab my extra fonts Whatever it doesn't matter. So what's interesting about this? When I do a frame here Man when I do a frame like this watch this There's a way way huge You know in all honesty That should only be Should only be like 40 millimeters Aaron Rodgers or Andrew Rodgers. Thank you so much, man Let me measure this again. Yeah They're like 40 millimeters here So I gotta be uh, there's gotta be something silly here. We're already focused The distance is 20 millimeters I'm gonna grab that and put it right in the center like that hit frame again See how big that's going for for uh for 40 millimeters. That's pretty dang pretty big, huh? Yeah, this thing is So the width is 37.7 millimeters That's a tight face Most recent not a bad idea Inches I hope it's not 40 inches. Uh, no, it's not Here's what I'm gonna do I am gonna I guess we can't really do a new file here just in case I have some weird line. I'm not seeing Select all ah see that Excuse me. So here We'll go build add build build build Boom, we're gonna go to stainless steel again I'm gonna set the size At 40 40 wide. There we go. There's the system fonts There we go. It did find a I found one of my fonts, which is cool Okay, here we go. Now. Let's check this out. I'm gonna grab Blue and put it in the center of the a I'm gonna do this I mean that's closer I wonder if it's uh Looking at the whole size of the square the square there Because we should be about center. We're close. I'm gonna take this blue dot Put it right there in the center We're doing it. Here we go You still got your camera. We still got the camera I'm gonna pop this over here for a second I'm gonna do a power cycle. This thing only stays on for so long this is engraving on a dog tag Grab the glasses We're just doing it. Here we go. Looks like It's still a little bit longer than the dog tag is but that's okay I don't know this software very good So we're rolling with it Looks like it's gonna take a few minutes too Let me know in the chat what you think so far. I'm gonna grab some water We're full sending it for sure Build that build. Thank you so much Andrew Rogers, thank you so much You guys have been absolutely awesome tonight with your donations. I really do appreciate that Pew pew all the things I don't know how much longer I'm gonna go. My voice is giving out on me here Definitely gonna take this into lightburn Cannot wait So excuse me cannot wait to do that I love the risers. I love the idea of the cylinders so we're definitely gonna have to check out how to use the tumbler It comes with a cable and a tumbler and I'm super pumped to use that That makes a permanent mark. I'll be slightly impressed I mean, I really hope it does Thank you so much Tony Tony, thank you so much. I really do appreciate that Five dollars. You are awesome This is stainless steel So it should um At least discolor, but it should mark it They definitely missed the somehow I don't know what's going on. It's definitely mismeasured I swear it said, uh I see what's going on. We're doing this again It changed widths on me. Maybe when I changed fonts If the wood catches I'll blow it out I'm good. Looks like about one minute left. This is super quick We're gonna flip that dog tag over and do it again Because it looks like the width jumped up on me Man, you guys have been awesome hanging out a little over two hours Honestly, if we were not live streaming this would have taken me about 15 20 minutes to assemble Uh Not bad at all to assemble super super easy and it's very very solid almost done Almost done. It's been saying remaining time about one minute for a couple minutes now So that's interesting This is cool to it as wi-fi I'm questioning if this will fit in my enclosure It may not close This should have been 40 real quick see a little warm a little warm Definitely on there And that's pretty freaking awesome I mean I'm gonna flip this thing around It warped the war warped the wood here burned all the way through it That's okay I'm gonna flip it around. I got the right size now It won't take long I'm just gonna toss it right there Make sure we're the right size good looks good Let's see what happens here Whoa, whoa, oh So there's this little blue dot I want to put in the center Build that build again. Thank you so much if you're still here That looks pretty close We'll frame it one more time close It's a 10 watt then yeah two five watt diodes, I believe Yeah conan, uh watch my video tomorrow Um, I'm releasing a video tomorrow about it. Uh pretty much That's what it is. It's an enclosure for these things It is John basically a tent Came from king gubby designs That's much better. It's off. Uh, it's not straight, but I'm I'll take that I'll take that We're rocking now Oh Gotcha I got the fresh air going Got a fan going got the garage door open Garage door is open even though it's uh Super cold out here 25 degrees 65 people here See if that gives you any better of a shot there Excuse me Tony, thank you so much man. I really appreciate that Let's see what this one looks like a little bit further away. There's me Cut Oh sheet Call me out and put these cheap ones on. There we go. Oh, yeah, let's see Thank you so much Tony Double vision. Thank you so much I got these sweet Sweet sweet glasses on now. Honestly, I wouldn't use these in a normal situation, but I dropped my good ones behind my other laser and I don't I can't fish them out. So We're using these quick. This has a really good reflective shield downwards Uh, that that laser acrylic around it, but from the sides as you can see in the camera Uh, not so much You know, if I'm looking at it like this camera here Not so much. I hope it doesn't wreck that sensor, by the way That would suck. I am definitely losing my voice So I'm not going to go too much longer here. Do you have any questions? Let's do questions just in case So this is the x tool d1 So far initial Initial thoughts super solid build Comes with some cool stuff They actually sent me I cannot wait to use it They sent me the uh A tumbler there So I can do like cups Anything like that A cowboy hat. That's awesome Uh Joe that is a good question that uh I'm gonna find out. I'm just being I'm being honest. I'm gonna find out So Here's the thing I really like the r2 or lasers. They've been great. This thing is built solid if this works In light burn as as good as it should That's gonna be super cool It's gonna be super cool because Uh, it seems like a solid laser. It's very very solidly built Just swapping over here so I can see what's going on and Oh man, my voice is going quick um We'll pull this back Definitely, I didn't have this straight, but I'll I'll get over that Build dead build hooked it up tonight with the uh, awesome Awesome donations. I really do appreciate that This thing is definitely warm but Look at that That is a stainless steel dog tag Definitely Definitely etched in there And Build dead build You win tonight I'll do that over here. So it's a little Hang on. There we go Look at that. So the burns on the edges for when I burned that first one This one too big But look at that Very cool. I mean like very very cool Not bad at all for uh first first print Little second whatever you want to call it um I really like That it could do these stainless steel dog tags with no problem Now could the x7 do that or the pro Probably I haven't tried it, but I know this one can for sure. So to shut this up. There's a little switch up here We just do that You know what we should do real quick I don't know if I have I don't know if I have a A quick file. I was thinking in this spoil board here. I should we should do my logo real quick But just the outline, you know Let's see. Let's see if I have svg quick of that Let me know if you have any, um Questions, how many lasers do I have? currently Five well Let me say this Out right now. I have four diode lasers and two co2 Two co2 lasers And another diode laser that I have not set up over here yet that I need to That's going to be a cool one That'll go on my cnc Thank you so much joe Of course, I just shut this off, but I'm going to look real quick I think I think I have a an svg Of my laser or I mean my my logo Man If you can hear my boy, I mean you could probably hear it, right? It's going quick That happens, right? Let's just do this real quick Again, if you have any questions shoot, uh I am just messing around at this point I am Just curious about how fast this will do an outline svg And I'll bring in that screen here in a second I honestly like this Uh, I like this a lot. I like it more than I thought I was gonna in the beginning It's gonna import There we go Yeah, sure we'll scale it with Oh, did you see that you did not Off the play I'm gonna definitely go back to light or use light burn for this um Light burn is so much better Change my material the bass would definitely I'll do do that that works The bottle opener on the side there G ready prince have a go a man Or whoever I don't know you very I don't know you but have a good one Oh, let's see defaults real quick Fiber board Yeah, let's just do basswood sure Uh, let's see we'll do it right there I'm actually going to do this camera this time Because it's a bigger a bigger one Let me remove that actually Let me try something We might be able to Get good shot because Because of where it's burning Let's see what this looks like whoo-hoo. Yeah Yeah So I already uh focused it. Yeah, I can't wait to use light burn um Let's see what this is Start This is gonna be really fast one minute It's gonna go here hang on Something that something I have to get used to here is At least in this program. I'm gonna put that like right there Do a quick frame? Oh, yeah, this will be fine. That's pretty good Oh, excuse me. Yeah, light burn is awesome light burn is awesome Nah, I don't need to flip it. This is a spoil side anyway You guys ready for this? There we go. Probably should uh Might have to open my garage door again here. Let's see Maybe you can see some of the smoke coming off this thing. That is serious I'm gonna pop the door open here just so My smoke alarms don't go off because I'm sure my wife would not like that I don't know how much this shows the smoke here. There's a lot What do you guys think uh any questions before I go any questions? awesome double vision The beer fridge sounds like a great plan That file will make a great 3d printer project. Absolutely Absolutely Once again, this is the uh x tool d1 If it keeps doing this yeah, this looks awesome so far Here so uh, I'm gonna shut it down Your device has been disconnected really I didn't notice Boom, I just want to see what you guys are seeing. Look at that. I mean That's clean, huh looks good Just for a quick You know just for a quick Burn Not bad at all Very good. I like it this uh or a Sculpt Fun S9 I'm gonna be honest with you. I don't I don't have the Sculpt Fun unboxed I have one but it's not uh unboxed This is gonna be super It's gonna be super blown out hang on Here we go Here we go Ignore the giant burn marks at the bottom Looks good clean. I'm really curious now how it does uh How it does um Pictures etc. I mean I could see it could do a lot of cool stuff with this I could see um I could see wood. I love the stainless steel if you just got here We rocked some stainless steel, which is really cool The risers You can put these risers on it raises everything up And then you can use your Rotary Haven't done that yet. We're gonna have to jump into that. So we'll definitely have to do a follow-up video on this. I'm feeling Yes, it's definitely rough on the lungs. I have doors open on both sides a fan going And I don't know if you can hear the heaters blown to but usually Usually my lasers are in an enclosure. You can see it right now. It's hiding over that way, but Uh, they get ventilated outside. I highly suggest that especially when you're doing this kind of stuff I didn't notice something Something that I forgot I didn't tighten the belts even You know what I mean remember we were uh One of the things we got so excited to print But I never I never tightened the belts interesting So that just that just made me think right now like oh, I probably should have tightened the belts There we go now I see Little twang So I'm surprised it actually did that good with uh belts completely almost completely loose A mouth under them. Yes There we go. That one's good I'm gonna do this one here Now that I see Now that I didn't forget a cabin scene. Yes So what's funny about that is they gave me a couple of pieces of uh Wood I can't believe this did that good without there we go and we're gonna call that good I can't believe that did that good with this good without tightening the belts. That's funny. So, um They gave me some cuts of fresh Probably pine by the guests So that'll be fun to play with Um the whole bunch of stuff in here to play with and a ton of dog. I have a lot of dog tags in here And a whole bunch of different stainless steel stuff I say a lot probably 10 dog tags some necklaces All sorts of cool stuff to play with so look for a video coming Sometime I'm gonna go over the rest of this. I think it justifies I think this justifies a a further dive into this video wise. So I'll do that Um Must be good software correction. It might be that's interesting, huh? I can't believe I can't believe we did that good to be honest. That's so good. All right Here's the deal. I've been here for a couple one and a half hours. My voice is shot And uh, I don't want to keep you guys any longer. So thank you guys so much for coming. I really do appreciate it Shoot me questions in the comments below if you want to Build dad build if you're still here. Thank you. Thank you. Thank you. I really appreciate the push there for for all of the I feel bumps now Probably went a little tight a little tight I really appreciate that the push for the donations and And uh donating yourself Let me back this one off That's better much better Maybe like a half a turn more Then it locks in okay. I just don't want to forget. You know what happens, right? The same thing on that one Remember this uses metal wheels Yes, thank you Thank you conan I am definitely gonna go get some sleep There we go much better Um, I'm gonna get some sleep before the little guy wakes up So we have an almost two-year-old and he'll be up soon Um Belt tension for 3d printers. I have not Look at that. Maybe I'll need to loosen that just a little more Looks like I will uh belt tension. I don't remember if I've done a belt tension video, but I can That seems like something we should do, huh? Um, but yeah Everybody else. Thank you guys so much That's better I appreciate it x tool. Thank you so much for sending me the d1 Solid printer so far or printer. I said printer solid laser so far cannot wait to see what else this thing can do Um I'm gonna go get me some uh vitamin c. Thank you. Justin 3d. Thank you I'm gonna get me some water some vitamin c And get in bed, but you guys have a great night. Thank you again for being here. Thank you everybody who donated Thank you everybody who hit that like button and the subscribe And we will see you guys next time. Uh, stay tuned tomorrow morning for A video on a an enclosure for lasers. So that's cool. That's coming out tomorrow morning. You guys have a great night Thank you so much You guys rock Thank you Bye everybody later