 Hello everybody, today we're going to be working on the Holler which is my 2006 Dodge Ram 2500 with the Cummins and a 6 speed manual. We are going to be installing a Amazon special exhaust tip on the exhaust. Right now the truck has 4 inch turbo back straight pipe exhaust all the way from the turbo back to the tail pipe. And we are going to be installing a massive exhaust tip on the truck and see if it makes any bit of a sound difference. I bet it does, but anyway let's see the exhaust tip. Alright so here it is, it's a U-Power brand and this thing is massive. It's a 4 inch 2, holy shit 8 inches. Stainless steel, it's a clamp on or you could weld it if you want to, but it is absolutely massive as you can tell and I think this thing is going to sound pretty damn good. I haven't made my mind up yet, we'll see. We might put it on straight like this or I'm thinking about cutting at the angle here and putting it kind of point down towards the ground a little bit. But anywho, that's the plan. So already have the tail pipe marked right here and we're going to cut some of this off and we're going to put it straight on here to go for, to start out with and see what it looks like and what it sounds like. But anyways before we start cutting pipe, I'm just going to take this thing and we're going to shove it right on here the way it is. It's going to look ridiculous, but I want to see what it sounds like real quick before we get started. So I'm going to start the truck without the tip installed and do a couple revs and then I'm going to slam the tip on the pipe and we will start the truck again and do a couple revs and see if it sounds any different. But we should be able to see what it sounds like just with having the bigger 8 inch opening. So just an exhaust tip does change the sound when doing something just that easy. That's crazy. So 4 inches into 8 inches and it made a pretty big difference. So hell yeah guys. Like I said, it definitely sounds a lot different. I like it. It sounds deeper, it's a little louder and it sounds really throaty with that monster tip on there. I don't know. Maybe we should just leave it like that and take people out when they're walking down the sidewalk. Who knows? But I don't think we're going to do that. It probably would last a few days and we'd knock that damn thing off. So we're going to get the cutting, the tailpipe back so we can slide it up in under the fender a little bit more and we'll see what it looks like just straight on like it is. And we may change it and put it more underneath the bed kind of pointing out an angle going out in the back but slightly out the passenger side of the bed. So I don't know. I'm going to start cutting. Alright guys. We got it installed. I'm going to ride it. I'm going to drive it tomorrow to work and see how I like it just sticking out the side right there. And we have it fairly flush with the back tire as you can see but hell yeah. So like I said we're going to run it this way tomorrow and see how I like it. If I do I might trim a little bit more off the pipe so we can scoot it back some more and then if I don't like it like this what I'm going to do is we will actually cut the pipe about right here where it bends we'll cut this bend off. So this piece right here it's straight we'll cut it off straight and we'll put the tip right on here where as you can see if it was right there the tip would be coming down right here straight. Kind of I'll pull the camera back it'll be kind of coming out the tail corner of the bumper and it would point slightly down to the ground right there. You wouldn't really see the tip too much if it was up there which I might like I'm not sure I'm not sure what it would sound like if it was actually pointed down towards the ground under there like that but it might make a difference with the exhaust bouncing off the ground I don't know. But other than that cheap Amazon U-Power 8 inch tip exhaust tip like I said it's 8 inch and then it goes to 4 inch to fit the factory exhaust pipe which this truck doesn't have the factory exhaust anymore it actually has the diamond die 4 inch all the way up to the turbo straight pipe exhaust but if you still had the 4 inch factory exhaust this tip would slide right on to your factory 4 inch exhaust. Other than that it sounds pretty good like I said it did it did make a difference as you guys heard in the video but we're gonna go ahead and start it up again and let you guys hear it one more time see what it sounds like. If not we might move it to the other position that I told you about so heck yeah guys that's gonna do it for today I'm gonna pack up the tools and we're gonna head to the house so thanks for stopping by if you're new please hit that subscribe button and hit that bell button and throw a comment down there and tell me what you think but as always guys stay safe out there and we'll see you guys on the next one peace