 2018 shop tour a three-minute version for the small workshop guy. Hola woodworkers Paul Carlson here small workshop guy. Three-minute workshop tour here we go so I find the best place to have the table saw is about four foot inside of the garage door. To the right of the table saw I have vertical wood storage underneath I have a big red barrel for off cuts. I also have all of the things I need on the table saw such as the grippers and the featherboard. We have basically an island here of two table saws one I leave a dado blade on it and it serves as the out feed table for the big table saw and the big table saw serves as the out feed table for the contractor saw with the dado blade on it. We keep the various cross-cut sleds just sitting on their ends down there they're really out of the way. We have the four-inch dust collection system shop fox some of the big 31 gallon garbage barrel with the cyclone top on it from Rockler. Have our bench clamps in addition to the clamps that also holds the tripods and the LED lights for shooting videos. We utilized all the space up above to the extent we can. You can see we're hanging bicycles and other things and then a major component is our tool wall with all of our bench planes and all of our chisels and above that tool wall we have a one inch by five inch by six foot long board with bicycle clips in it and those hold power hand power tools very conveniently as you can see. In the back right hand corner we have all of our electronics with Alexa. We also have a Wi-Fi and we have security cameras as well as better battery charging stations. Then we have a second island which is made up of our temporary workbench. We're working on a samurai five-foot workbench to replace this one. We keep jigs and things underneath. I have the port-a-mate compound miter saw stand that folds up and even the compound miter saw will fold under to make a seven foot work table and then we have the drill press inexpensive one for right now. We have an eight inch jointer, have a router table, all of those are on casters and move easily and then we have our bandsaw and our thickness planer. Small workshop guy, hope you enjoyed the tour signing off.