 So to program the stove and grill guard from the home screen of our 2G panel We'll press the 2G logo up here in the top right corner and punch in our installer code, which is 1561 We'll click on system configuration and wire the zones So we want to program this device into the first available zone here on my panel. That'll be zone 20 So we'll start first with center type the center type will be 23 no response The next question is equipment type, so we'll just choose contact for that one The equipment code is going to be 0862 same as the 2G door contact For serial number I took a note here. My serial number is going to be 0-0-0 0-2-2-7 Equipment age will leave it as new no changes there We do need to change the loop number to loop 2 Transmission delay I'll go ahead and disable that And for voice descriptor we're going to add three words. We're going to add gas Left so there's our voice descriptor and gas left on that's what the panel will enunciate if the device is left open Sensor reports, we will leave enabled no changes there I'm going to disable supervision and then lastly for sensor chime I'll choose voice only We'll back out of this menu to save I thought when we can now receive notifications from our stove and grill guard Make sure to subscribe to our YouTube page and click the show more tab underneath the video Where you can view valuable links pertaining to this product similar how-to videos and our low-cost no-contract alarm monitoring services