 everyone shiver 1000 here today we're going to be putting these tiles up they're just the peel and stick tiles they are removable but the first thing we got to do is some prep work and I want to show you what we're going to do first we're going to get right into it stick around take them off and we also have some scraping to do right here all the way across any of this from the old there's some caulking from the old backsplash used to come up here a little bit of glue and once you get this all scraped down I'm going to do that and monkeys go to wipe it down you're going to let it dry completely and then we'll move on to the next step let's see there's some glue coming off there from the old backsplash so make sure you get all that off we're going to do that first take these covers off and we'll get to cutting some tiles sticking them on so stick with me let's get on with this okay guys so the first thing we're going to do is we're going to cut this tile we got to get these these parts here off so I'm going to do is just using my straight edge go right up against here just like that it's actually called a speed square we'll start there I want to make this straight just like that so make sure this is clear up against there okay there were first towel let's go in and stick it on okay now these tiles have a backing and it has the front protector on it leave that front protector on for now so what we're going to do monkeys already got the wall I did the scraping and she's got the wall all cleaned down for me so we're gonna peel this off not all the way yet we're gonna go back just a little bit kind of peel this over let's stick this up in here I'm going to go back a little bit to cover that hole we got there and we'll make sure I'm starting straight there because this is going to be cocked too so backing off it is forgiving so I'm going to go right straight to the bottom of our of our countertop there just like that push it up just like that now use my little knife here I'm just going to give it a little protective cover all like I said this is going to be cocked in here so if you don't have that straight don't worry about it same way down here that's going to all want to be recocked okay so I'm gonna move on down when we get up to the top I'll show you the top it's pretty much the same way only we're going to go up to the bottom of the cabinet and I'll cut off where I need to go this overlaps so what I'm going to do is I'm going to overlap this we'll find out we're well this hole let's pretend I'm just covering right over this but let's pretend like it was here now you can measure over and up and all that you can go around there and you can see it and you mark a line with your pencil you can mark that out where you want to want to cut it so when we get to that one I'll show you how we want to do that and we'll go ahead and get this one put up I'll be back with you okay guys this is what we're looking at so far all I did on this thing is I stuck it up there and I had her hold it and I just went ahead and cut around that that's how I did that same way with this I just measured it I held it up there to see where I was going to about where it's going to be then I then I measured it I made a little mark there and I came down and I cut it back so far and then I cut this little little dog leg out here now we're running down this way you know the issue we're having is this counter is running downhill and my tiles are running straight so what we're going to have to do to remedy that is we're going to put trim down here on the bottom and then up here see you can see where I'm trying to straighten it out we'll just run a piece of string trim or something across there there's nothing I can do that windows not square and they measured to the countertops from the floor and the floor is not it's not level so my stuff running level now the reason why I didn't go to the bottom of the counter or you know to the top of the countertop is because I knew this was running downhill so you would be able to see it in the corners really bad you would be able to see it so this way I can hide a little bit of it you turn that on so yeah I think it's gonna look nice here I'll back you up here a little bit so you can see so far here we go I like the trim too I think that's a lot nicer than coffee yeah yeah these ain't low so anyway we're going to keep going and I want to do that receptacle same way I did this one and we're going to keep going and then we'll show you what we're going to do after that but like I said down here we're just going to get a trim a piece of trim half inch three-quarter maybe and we'll put along the bottom that I think it'll look nice so all right guys we'll be back with you okay we're on the last piece I didn't take you with me almost that because like I said it it's self-explanatory you just cut around things and you're good to go because all this like up in here pretty much just cut on a line so there wasn't really measuring the only thing I had to measure is there's a little piece in here I had to put in which I know you can see the wall in there but this is going to have caulking down through here and then out around here it's going to have trim molding so let's get the last piece I thought I'd bring you with me on this one like I said I've just been using this thing put on there real good don't protect the coating off and there it is guys so bring you back here and I'll show it to you there it is like I said there's gonna be trim down under here a little bit right there each side of the window and then up here and then right back in that corner down to there so let's see here that's really nice yeah looks finished now it looks just really nice more of those blue there we go accent lighting yeah all right they changed color walk me pretty pretty pretty you can make it brighter that one dimmer or brighter you know we this can control up to 36 lights but the problem is these are up under the cabinet so the sensor won't doesn't pick it up so you kind of got to go under right but other than that there you go there's there it is all right I'll be back with you guys and we'll do an outro okay guys so there it is just a kind of a quick and easy job the couple hours half a day then take half a day what time you start well 31 well at least one so one half a day five o'clock all right half a day whatever I took my time I take take your time it took a couple hours but you know I was filming I would stop and take a break but total working time maybe two hours right so everybody's different some days some guys might take them a weekend some guys can have it up in an hour but I think it looks really nice I really like it makes the kitchen and it's finished you know makes it more finished so there you guys go so we'll let you know later on how they're holding up and everything and we'll go from there yeah that's real easy real easy to cut like I said just around these things you can measure or do what I did and just kind of held it up there and monkey hold one hand I just kind of trimmed around it and right over top of it real easy only one part one part I had to measure like I said the rest of this just right right on the lines you know like if I had to cut it was right there so it's real easy okay thanks for watching shape really meant my little legend like such stuff and I'm y'all I'm going for now bye-bye guys take care