After watching this video, you will know how to limit the access to your radio devices.
The wrong approach is letting the customer to have the ability to change the service on his own. By improving network efficiency we ensure that only the network devices in the management VLAN can manage your radios.
Considerations: - The bridge mode is required in order to use the management VLAN. - VLANs require either a VLAN switch or a router. - The management VLAN is only for management purposes.
Configuration: 1. Connect to the management IP for the LigoDLB unit. 2. Enable the management VLAN with an ID between 2-4095 on the access point. 3. Enable the same management VLAN on the station. 4. Save and apply your configuration in the access point and station.
When you configure the management VLAN, your HTTP connection to the device will be lost unless you have the management traffic tagged with a switch or a multi-VLAN router.
Important note! There is an option to enable a "secondary IP" to avoid the use of VLAN. It is highly recommended to use the secondary IP only temporarily.