 Hey guys, it's Parker Dillman, the Longhorn Engineer, and I was looking through a bunch of my old electronics and I found this portable that I was working on about a year and a half ago. I never really finished it, but now I'm going to finish it. So it's based off an NES2, I don't know, let me adjust the light a bit, that's a lot better. So you can see it there, it has a PS1 5 inch screen and for simplicity it just uses a regular NES controller for the controller. There's only a couple wires that were broken and so it took all of 5 minutes to get it working again. It runs off of 7.4 volts, so if we turn the power supply, you can see it's working. This sounds a little weak, it needs to be amplified a little bit because if you look behind, the rest of the NES2 board is just gone. I chopped it all off while it was modding it, but it all works. Techno Super Bowl is probably my favorite game for the NES, but yeah. Here's the video mod that I did, it's different from any other video mod that people posted for the NES2. The NES2 is actually usually only RF video out, but there's a lot of composite mods and well most of them are crap and you get like vertical lines on the screen, if you tell there are no vertical lines on that screen. But in the description, there's a schematic, it's actually compared to other composite mods, I think it's got like 4 or 5 parts and one part actually comes from the board itself. That's about it guys.