 Ευχαριστούμε και ευχαριστούμε για το second day of my event featuring Hero Arts. Σήμερα θα χρησιμοποιήσω ένα άλλο λαϊκό στάμψετ και αυτό είναι called Birds & Blossoms. Είναι έναν καλύτερο στάμψετ για να δημιουργήσει σπρινκ-κάρδες. Και μετά με αυτές λαϊκό στάμψετς πρέπει να δημιουργήσεις την κατασκευή στο κανάλι, στην κατασκευή της πακκάδας, που δημιουργήσει καλύτερη συμφωνία για να δημιουργήσει τα φλασσά ή τα λαϊκάρδες one on top of the other. Μπορείς να τα δείξετε αυτοί ή να τα δείξετε στην κατασκευή, μετά με τα 4 κουμπές εγγυρφές, και μετά από τα πακκάδια υπάρχει ένα στάμψετ που μπορείς να δημιουργήσεις για να δημιουργήσεις αυτή τη στάμψετ. Λοιπόν, όπως πάνω, θα βρεις έναν πόλη της όλου τα πράγματα που χρησιμοποιήσω σήμερα, εγώ στον εξοδοκλή της εξοδοδοκλής. Θα αρχιζω να ξεκινήσω από τα λαϊκό στάμψετς, ο εξοδοκλής θα πήραν. Δεν θα δημιουργήσει αυτό. Δεν μπορώ να τον καταnahoredοξέψει, αλλά όχι όλο το εξοδοκλή. Και εγώ πιστω, ότι έχω αυτοί οι λαϊκό στάμψετες. Στην της στάμψετς ή η μοναχή που είχα δοκιμιότητα, αλλά της μάτια, δεν έχω αυτοί τα αυτοί τα πράγματα που δημιουργήσω, αλλά αυτοί τα οπτικάνα τ vient της στάμψετς. αγαπησπέρα που δίνει σε αυτή την εμπειρία την ευκαιρία να σταμπιστεί πολλές εμπειρήσεις πραγματικά να πω και να σταμπιστεί κάποιος μόνο πιο έννοια για να έρθει μια καλή εμπρασία και τώρα στον τέτοιο στήρα υπάρχουν ελληνικά πλασόδια που μπορείτε να σταμπιστεί σε κόσμο των αρχατών αν βλέπεις ένα δωρφό με τον κόσμο στο τέλος του εμπρασπισίου θα δεις τι σημαίνει τι άποστη But I'm going to show you another way on how you can layer those flowers on top of the branches. If you take a closer look on those dies, they don't just cut out the branch, but also they have space for the flowers. So you can either start by cutting out all the shapes and then start stamping one layer on top of the other, which is quite difficult for me since they are such tiny little pieces of paper. And the other way is the way I'm going to show you now. So first I'm separating all the dies of all the branches that I'm going to use. And once I have everything ready to go, I then go ahead and look at the stamp set. So at the stamp set, just next to the branch, there is a bunch of flowers that matches perfectly that branch. And you will see if you take a closer look at the die, that it's super easy to layer one stamp on top of the die. It just pops inside. I'm going to lift it up so that you can see how nicely it pops inside. It doesn't fall at all underneath. And now I know that this stamp is perfectly aligned with the die. And now I'm going to place the die and the stamp on top of my branch and make sure that it's layered nicely. Just because the stamp is transparent, I can easily see through and make sure that it's nicely aligned. I have picked it up with the door of my MISTI and now I am going to stamp my flowers. And I like to think that this is a cherry tree, so these are my cherry flowers. And you should that they are aligned perfectly on top of my branch. And I know for sure that when I put the die on top, it's going to cut out perfectly fine. I'm going to show you here how nicely it fits the flowers and the branch. Of course you can go ahead and do the same thing for all the flowers at the same time. But I'm going to show you one more time with this branch. So I'm going to pick up the flowers that match that branch. So I'm going to look for it and just next to it, you will find the bunch of flowers. I'm going to pick it up. I'm going to place it on top of my die. And you will see that it fits right inside and it doesn't even fall if it fits correctly. Then I'm going to place it on top of my branch, pick it up with my MISTI and do the exact same technique. I hope it does make sense. But this is a very clever way to end up with perfectly aligned images, especially for this design. Since it's so intricate and so tiny, it's really difficult to find out where the flowers match the branch. And I'm going to repeat the same process for the rest of the branches. But since I'm using my MISTI, I'm going to make sure that I align all the flowers and then stamp them at once. And now that my branches are ready, I'm going to use the matching dies and run them through my CISIX machine. And you can see the branches ready and cut out. Now I'm using the flower stamps from the set and I'm stamping a few of them in this scrap paper. I don't know exactly how many of these flowers I'm going to need to embellish my final card, but I will go ahead and stamp just a few to have enough. And as you can see, there are two stamps for each flower that you can layer one on top of the other. These are really easy to layer, so you don't really need to do any tricks there. I am using a lighter pink shade for stamping the flower and then a darker shade to stamp the center of my flower. I cut out the flowers and now I'm going to use these three ink cubes to stamp the birds. For the birds there are two different layers, the one that gives you the detail, which is the one that I'm using now. And as you can see, I have made sure that I stamped the legs in a different color than the detail of the feathers. And there is also another shape that gives you the basic shape of the bird that I have stamped with my lighter yellow. Now I'm going to do the exact same process for the next bird, so first I'm going to stamp the detail. I'm going to touch my stamp with orange and I'm going to touch the legs of my bird to brown. And I'm going to stamp that on top of my white cardstock. And then again I'm going to pick up the basic shape of this bird and stamp it with my light yellow. I find that this way it's easier for me when the base color is super light because this way I can align it easier. And once the birds are ready, I'm going to use the matching ties and cut them out. And all my cutouts are ready to go now, so I'm going to create my background. I have cut out a rectangle out of this white cardstock, which is going to be the background panel. And I want to create my sky. I am applying some distressing and that's broken china. I am applying it with my blending tool. And if you notice just to create a different design and to make it look more interesting, I am only applying my ink at one corner of my panel. And now it is time to assemble my card, so I am adding some tape adhesive at the back of my pieces and I'm going to stick them directly on top of my panel. For the branches I'm going to use tape adhesive, but for the birds I am going to use some foam tape so that I can add a little bit of dimension. Now before I went ahead and added the adhesive, I did made some test runs and tried to decide how everything would go on top of my card. My design is ready and I'm so happy with the outcome. So the only thing that's left to do is to stamp the sentiment. I am combining two of the words that come in the stamp set and I'm going to stamp with black ink Hello Spring. I think this is a beautiful card to send to anyone this time of the year. And what is great about designs that have flowers or trees just like this is that they are so versatile and they can be used for any occasion. So this can be a beautiful birthday card or anniversary card, anything really. And since there are two little birds there, I think that it could be a great anniversary card actually. So anyway, I'm going to give my birds a tiny little eye which is going to bring them to life. And just because I couldn't leave my card alone, I just had to add some shine on all the flowers. So I'm using my Nuvo glitter pen. This is just like wing of Stella, but I believe it has more flow and it adds even more shine. And to finish it off I am going to bring in my white gel pen to add some dots at the center of the flowers. But you don't really need to do that. I just like the look of white dots or no, pretty much everything I do. And at this stage I decided that I needed to stop doing finishing touches and just stick this panel on top of a card. So I'm going to use some foam tape at the back of my panel and I am going to create a white standard card that's four and a quarter by five and a half. I'm going to peel off the backing and stick it at the center and also this panel I made sure that it was slightly smaller than a standard card so I get a nice border all around. I always like to have this border because I think that it adds a nice finishing touch. So that was the card for today. I hope you had fun and got inspired. And if you did, don't forget to leave my comment as well as give me a thumbs up or my YouTube channel. Don't forget to visit me tomorrow for one more video featuring Hero Arts products. Thank you all for watching.