 Now we have it. That's the second big dint of the job done Thank you concrete company as you can see laser set up. That's our date online. That's no particular height That's just supposed to measure down on Good morning and welcome to Thursday the 7th of December at Fairpast 8 so We've just arrived at work We've been to Fairwoods to pick up the Insulation what type of insulation is it? I always call it PIR the Cellotech stuff, you know the stuff on the floor the foil back PIR stuff So we've got three of them. We've got a jab light 25 mil for the cold bridge and strip We've already got a piece of viscine cut yesterday that we put down to weatherproof it overnight And we've got the other two pieces which are going to go under the insulation So first things first, Alex is going to start bringing the sand around for the blinding which we shouldn't need much of I need to knock on the door and get the customer to open the back door so I can check the levels because the doors are coming out It's going to be a level floor through which always gets gets you a bit nervous So it's just coming right now And it's not raining so far. It's due to rain all day, but heavier this afternoon. So the big push is Get it prepped today And leave it Trying at the concrete tomorrow morning. We don't want to be concrete in this afternoon In case we're not ready and plus it's going to rain really heavy, which is an ideal for the floor so I'm going to work around the weather on this one We've brought the tent just in case because If I'm taping the viscine around the door, it's got a good bone dry Yeah, let's get out there and get stuck into it I've got much in there so that's not too bad. I'm going to try and get this out and get all the water out with it As you can see the laser set up, that's our date in line. That's no particular height That's just supposed to measure down off So we're going to open the door measure down to the existing floor get that measurement and then check that measurement with our DPC level and see whether we need to add anything to it or or not. Hopefully it's slightly lower Yeah, that's it. We need to get this out get this door open But we need to open the door for us. So on time lapse then we've had the door open. We've dipped it with the tape We've got 365 to the floor and then we've got 390 to our DPC So that's 25mm lower than that So what we're going to do is we're going to stick to our DPC and just tamp it level and then it's going to be laminate floor inside Customers just said they're going to use laminate so if it is slightly lower on the floor We can build it up with the insulation to the laminate So the main thing is we don't get the slab high No, we don't want it high or more than 10mm low We don't want 50mm low again, do we? Remember that one. I don't have any good memories from that job Oh, yeah, there are cats here. Yeah, so there you go. Switch the laser off. Well, leave the laser on for a bit So I'm going to start We need about 30mm of sand more or less all the way around Nice and dry because we kept the plastic on The only wet bit is there We're up against here, so Sand blinded We're going to get the two pieces of the screen in the tape go up and then that top piece is for the top layer Everything's ready. So let's just get cracking and get done It's threatening. So let's get it cracked off Up against it today That's as usual. So firstly, which isn't important at all. We just heard a bloody man whoring the time like the bloody Avengers theme and then The important part we've rang up their building control. We've left a message because no one's in so hopefully Look it back to us soon If they can't see us today then tomorrow hopefully we're not concrete today, so there's no rush Obviously if they can't see us today, that's great. If not Fingers crossed for tomorrow and we can get concrete in That's just gonna get this smoothed out now see if we need any more and then we'll get started with the screen Have you changed it for 4k by the way? Oh, yes Little speed bump. I think I don't think we're going enough insulation boards But we're going back to Fairwoods anyway because we need to order some more sand so We might just Get all this get what we can set up now get all the coal bridging in and then have quick break In Snip to Fairwoods now, maybe Order the sand get this other sheets and then get back here Finish it and then head to Selcos to get This stuff them slab covered cavity slab 32 Best take a picture that actually they have it in stock, but they never know what we're on about so We're gonna have a picture But yeah, so that's the little update and I'll go help dad get the rest of this stripping and then we will Go get some more insulation There we go. What time we are now? It's gone very cold. I feel that it's going to snow It's 20% 10 So we're going for a break somewhere. We're going to break now because we've got to go and get another sheet of insulation for that That piece there That piece there That's how short And I worked out on the cycle later Never mind put a piece in the corner jam the piece into the corner. Don't want to make a bigger piece here. No, you're right So there you go Insulation is nearly done Then all we have to do then is get that on top and we waterproof and get completely covered It's pretty at the still off as well Maybe just pack the installation out along a bit I'm gonna nip off get the insulation and I'll probably get a few bits around a bit get this side loaded out at least Organizingly close Yeah, I'll go and get this and catch you when I come back. Happy Friday Friday the 8th of December 830 Yeah, happy Friday. I was just polished off his bacon butty I don't have a fry up, but it's near enough. I've got my coffee We're actually we're a school walk from the spa. We were that close So it's a bit dangerous spending money My money He's off to see near in 20 days. So we need to save up to get for his flight and everything Mind you be working when he's over there doing the stocktaker stay near shop with her There's somebody somebody's come in to do you need to get near to do the outro as a permanent thing Yeah So the plan for today is just rang the concrete company up See if they'll drop us some concrete off and they said yes, which is brilliant Not often you can get them last minute like that on Friday as well So he's put us down for our 12, but we're just sat here waiting for the Building spectre Branging mist as I said you really supposed to give him 24 hours notice But the way the weather's been we can't really plan that far ahead So what we need to do is get all the water out this at the visc green which we put on top We didn't feel much yesterday at the end because It was pouring down one. Yeah, we just need to get the visc green on top and get it covered So that the insulation wouldn't get wet. So yeah, we need to put that in properly Get the water out put it back in and then cut it and tape it around the door hole Which we always do so it fits properly and then hopefully by that time the inspector's been and in the meantime We can't actually do any brickwork yet because the weather's not that fit I mean we could but you don't know what's gonna happen and we need I'm waffling again, but if we start doing the brickwork, we can't tamper cross So we're better leaving the brickwork till the slab's in And he can't change his mind because he's left the chores at home. Oh, yeah Yeah, we aim last night we got back and took the give the took the there's a lining on the floor of the van at The backs that we took that out cleaned all the inside of the van all the floor and the liner because The van is going on auto-trader tomorrow. I'm hopefully it's gonna sell in two weeks because that's when Neil's new vans coming and oh, yeah, we've got a Crap load of bricks there. We need to get loaded out. So we can probably load about 800 bricks out ready to start So yeah, that's the plan I Start loading out Soon as the building inspectors being get this slab done Job and knock on the slab. So fingers crossed the old works and the concrete comes after wells It'd be nice to finish for two o'clock on a Friday I've said it now I've just jinxed it. I said hopefully we get finished for two. So that's it. I've jinxed the day now so Sorry, we didn't film much yesterday, but You've seen plenty of these anyway We'll see you around there in a bit. We've just got the okay from the inspector. Happy days. So we're going for concrete And I think I've already said this but we're gonna get the bricks loaded out Have a quick break and then dad's gonna go back and pick up the wet drive back And just like a few of the bits we might just need maybe some wellies There's nothing in the van because we were cleaning it last night So we just bring the basics and whenever you do that always forget something And in this case, we've got a wet drive back to get all But it's been giving me a okay So it's a nice job And I asked about the vertical damp and that will put the vertical damp in 50 million and then vertical damp at the back of the outside skin just to stop any damp tracking through So we're happy with that. I need to cut the massive big cavity out And Let's get there since breaking That our break dad set off So I'll get this last palm moved up and then I think I'm gonna start bail out a bit of water. So we've got a head start because the time is 10 past 11 roughly So we've got an hour and 20 minutes for dad to get back get that bailed out and get it cut into place in those corners, so Better get a move on. Thank you concrete company We appreciate you a Being patient with us for 50 minutes That's all the long it took in total. They were due at half 12 and they came at 20 to 12. So Yeah, that was a half way home getting the knife for the Yeah, so obviously we've gone overboard with it just to make sure we have enough anything else It gets gets dropped in the cavity now We're gonna have a quick dinner That's my cue so we'll see you after lunch for the tamping so I give you a little close-up Assembly of our temp So obviously we'll place it down on a flat level wall we bolt our pieces timber together and then there's our That's our time and when we're done, we just disassemble it and clean it easy to transport easy to use To win win there you go now after lunch we will be Tamping see you then looking nice Almost finished With the tamping part. Hmm Knock on wood. Yeah, so yeah It's looking very nice. Obviously we're gonna smooth that out give it a little a floating a level So this is the best way doing this Yeah Now we have it that's the second big dint of the job done second milestone getting the Slabbing So we'll be back here on a Wednesday So that gives it plenty of time to dry up whether they're gonna be terrible for these next few days So we're just gonna take the weekend and then I'm gonna Tuesday. I think we're doing a fence with Jason. So Maybe stay tuned for that one. We'll see But that is the bleh bleh that will be the end of this video Thank you all very much for watching if you enjoyed be sure to give a thumbs up and if you're new to the channel you want to see more hit subscribe and That way you'll know when we upload there's always a massive help and if you want to give any extra support to the channel for dad's hip fund There's a super. Thanks under the video or in the description. There's a link to dad's PayPal direct So not necessary, but really appreciate it. So thank you very much. This has been brickling with Stephen Alex with our With a whole slab ready and we will see you in the next one