 Hey everyone she bear 1,000 here today. We've got this Paper towel holder for the kitchen This part keeps falling off you can see why We're gonna fix this for like the third time hopefully the final time Let's get into this See what we can do with it and see how long we can make it last Okay, so first of all the camera is actually straight this time. It's the table Sentin downhill, but that's okay. I'm this is just a quick fix Okay, so there's a problem these things keep What happens is there's only one screw that goes up through the bottom of this and holds that and then when you when you go to tighten this up a lot of times people will tighten it too tight and then As you go to loosen it it wants to back out of the screw Don't tighten these too tight. It's just paper towel. All you got to do is just put it on there, and that's it okay, so I Got this really long screw Because that is way up in there the first time I fixed it was with the original screw the second time I Was with the I put a little longer screw in it. It was a drywall screw This time We're going with a really long screw We're gonna add some glue in it This is a it's got a shoulder on it, but that should Yeah, there that'll tighten all the way up the first thing I want to do is I want to drill this There's kind of like a pile of holes started there. I'm just going to drill a pile of hole This is a 330 seconds bit, so it's kind of tiny just so I don't That's all I'm doing this for and by the time this goes the screw goes up through the base It's starting to rain It's pretty close Man, I got a hurry. I didn't know what's supposed to rain. All right, so what we're going to do I'm going to open this Elmer's glue up. That's all I've got wood wood glue in there But I don't think it's really going to matter on this thing and I'm going to try to get this Down into the screw hole Then I'm going to fill the rest of that up Just like that Then I'm going to put this The bottom on here First Gonna put our screw in now. We're gonna put the bottom on I'm going to hold this kind of tight and I'm going to use Going to use this for it, but I'm not going to tighten it all the way up with them. I'm just going to get this Started in here just like that now I'm going to use My hand screwdriver and make sure it's tight and it is and there it is Now that glue is going to set up That's going to sit there like that Just that's all you got to do guys. It doesn't have to be super down a whopping tight I don't know why that gets down, but Just screw that on there just like that That's good enough Because like I said The tighter you tighten this The tighter it's going to be to untighten it which is going to unscrew this from the base so let's Give it a little bit of help there So there you go, that's done. I'll let you know in about a month How well it's holding up quick fix for you Starting a playlist. I think I got one video on that playlist, but something like this Where I don't have enough to make a complete video. I'll throw it on a quick fix and there you go You can use just this if you want But my hands don't work like they used to so that's why I started it with this and Tied it with this Always pre-drill hole if you can or that probably would have split She bears myth man legend gone for now. Happy New Year everyone. Take care