 Hello, this is Laptop Media, and today, we will show you how to open the HP Envy 15 and what's inside of it. To get inside, you only need to undo 5 Torx head screws. After that, just pry the panel with a plastic tool, and carefully work your way around the device. Then, lift it upwards and keep in mind there is one last clip holding it in the center. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. At first glance, the cooling solution looks promising, with a total of 3 heat pipes, two of which are shared between the CPU and the GPU. Also, two metal plates are covering the video memory and the VRMs, while the fans are pretty large in diameter, although they are slim in profile. It supports 32GB of DDR4 memory in dual channel mode, and there are 2 M.2 PCIe slots that can work in RAID 0 mode or independently. The battery here is an 83 watt hours unit. If you'd like to see more disassembly videos of the latest notebooks we would highly appreciate if you hit the like button and subscribe to the channel.