 and I do this over there now. Right, it is three minutes past nine. We left the camera, so we're going to say I've just come here with it now. Maybe a little update on what we've been doing in the meantime. Dad's got the scaffold set up on this side and what we're going to do is we're going to get the trestle set up on that side and I do this over there now because with it forecast rain, we could get all that up but we don't know the exact dimensions of it all yet. So if we get that side started, we could hopefully get the other lintel in and build over it and just get set up again. So that'll give us time to know what we're doing. It just occurs to me that I keep saying so again. Furthermore, it'd just be a bit quicker if we get that part done up and finished. Then we've got another lintel and there's another milestone hit. So I'll catch you in a bit. We just had someone come up. We thought we were about to get told off for the dust or something. He's just come over to say thanks to the channel, he's built an extension from slab up. It's great to hear that someone's learning stuff from the channel. That's what it's all about. Well yeah, that was nice. Sandy, thank you for coming and saying hi. We should have made it better. Dad's got his shape cut out. So I'm just going to help him get the stuff put into a bar right away. Save the mess. Do you want to hear a chisel? We'll put it in that then. But we should be ready for some water soon. I'm going to go fetch it. Now because we're using two, we obviously need six bolts. If we don't have them, we pinch one off this pack. So we're going to four bolts for this one now. So for the top. Going to make do with the resources you get, haven't you? Now we can get some more from the board at probably about 11 o'clock. I'll just show you my little hub I've got going on too. There's a lot of charging hub at the moment. I've got all the, all them charging. I've got that one. Radio. And obviously for the drills, jobs are good. There you go. That's how efficient that raffle is. That's the battery from it. It's still green. All right. Let's start off with some water. And then a little fish. One day by day. No. Well there we go. We've got five corks. That's nice. Five corks in a... Five? One, two, three, four, five. Yeah. Oh yes. We've got five corks. So we've got the lint... Dad's got all the cuts in done. Is that going to hold in that pit? Or is that the... That's the wee vent. So we've got all the... Cut out the cavity in the lintel hole. We've got the lintel in. Got five corks in. He's got the block over the lintel. So... And the... Oh, the scaffold set up over there. The rain has finally arrived. Let's see what times it'll say it was due. One. About quarter past 12. No, I just got rid of it. Um... Yeah. It gives us a good start for when we're here when it's dry. Yes. We'll... I've got steel to do inside. There's also a block up. So hopefully we can... Decide we're going after another job. Because we'll just stay here and get finished. Yeah. Get paid. There's also a window to block up a vent... A brick up eventually too. This is day six at work. Yes. So I've almost worked more than I did last month. Long time since we've done six days on the truck. I've got nine days in... And before you say, oh, you're away with Nia. In September the month I was back. That's how awful it's been. Probably a week. Over a week that was due to this building inspector. Yeah. Building inspector was a week's worth of fault. Just... Put things back. Put things back. Then the weather. Well, yeah. We'll see you next time. Morning. Happy Monday. So customers just come to the van. Chris Tim and Melon Man. Huh? Happy Monday. The older people will get it. So customers just came up and give us a rough battle plan. So we have an idea of what we're doing. Do you, okay, to explain? Going to get the timber for the deep part of the water plate. The top water plate. And a spar. I'm going to set up a spar. And work out where our rafter ladder goes so we can build in some bits of foreboding. So hopefully as long as the weather holds we can get these two packs finished. And then we can move inside to the steels. Yeah. Which I'm going toward in a minute. Customs are hiding up that way to get the timber. I'm going that way to get the steels. Ordered steels. Not far from JM, about a mile. Yeah, that's not bad. Yeah, so you remember we've got this side in that condition plus a little bit more. So we're going to start this side since that's where the scaffold's set up. And yeah, so I'll get a mix on while he gets everything else sorted. And I'll get like our workstation set up because we're going to need a bit of charging today with all the cutting I'm going to be doing. Because obviously with all them funky cuts to do for the blocks on the pike. There we go. And we'll get you set up then and... It's all cut now. Yeah. A lot of cuts. So I've just set up and we're going to get a charging station ready for the batteries. I'll catch you in a bit then. It's afternoon. And we haven't set the rig yet but we're helping Dave to get this wall plate up so we can get his spar sorted out. I don't want to start doing the cut-ups and it be wrong so we're going to set up an actual piece of timber to work too. So Dave's just nipped off to get a couple of nice sharp drill bits and we've just got these coupling. Oh, far away. I'll try these two off the other. What happens? Just be careful. This is a blunt bit. We're getting some new bits. This is not the ideal drill but we did know we were doing this there otherwise we'd have brought the little 12 volt STS in. That would have had them all drilled out by now. It's just a good drill. It's a good drill unless you're drilling. It's a good drill unless the bricks are very old hard. These new ones are dead soft. The old ones, even though they're clay comons, are freaking rock hard. And these drill bits are struggling with them too fast. The STS is a lot slower and there's more... Punch. More joules of impact on these. These like... The STS is a lot... Which is just right for you. I've never got any STS drills for you today. Like you say, we weren't expecting to be drilling timber or brick layers. Silly ass. Very clear in the van. Oh look how clear the van is. We've got loads of room. Now we've got no tools. That's done the full bit. Put it in line. Put it in line. It shows how much use a new bit is. Defeated by the rain again. I'm just telling them defeated by the rain again. So weather app said today. It'll be on at 9 o'clock in the morning. And it'll be stopped by 10. And then it started raining. It's like... 12 o'clock? What's that? It started raining at about 12. Hasn't rained for dinner because of the rain. Yeah. Yeah, so... Right in the middle of our day and... Oh, you guys know how it goes don't you with the rain? But there you go. There's that wall looking so far. Dad's almost got that brick side of the pike up. I think... There's one bucket left in the mixing of giving that. That should be enough to get the pike in I reckon. Fingers crossed. Things like a spade full left if not. And then obviously there's the wall plate if that's what it's called. Yeah, I'll throw you back. I'll change this battery and get you up on time. I'll just show you how that's going. And while he's been doing that, I've been chipping out some of this old bed. Yeah? Oh, we had a lady stuff until our husband says we're really great at what we do. So that was nice. Two components we've had in this job. Yeah. But um, yeah. What was I saying? Yeah. I'm knocking out some of the bed joints and the cross joints that we missed when we had to do it overhand under the fence panels. Get that bit... Once I've got them chipped out I'll probably joint them tomorrow or something because we need all the more to finish that. I don't want to see a bottom mix, maybe not because it looks like it's threatening again. Got all of the weather out. Right, enough waffling. I'll get you ready with Dad in a sec. More or less finished, apart from the block work. The cavity runs through there. It's into the original cavity. It's up for today because it's Sarah's birthday today. So we're finishing, tying up and going off. Meeting them for her birthday, see? Because it's October the 2nd today. So he's done most of the tidying up. This just needs jointing. This just needs tidying up. And then tomorrow, the weather's meeting, we can jump on the block work. Dave's nearly finished the spar pattern. Once that's done, we can nick that into place here and I can get the block work actually spanned on and get the block work done. Get the cut done with the saw for that. These bricks are fine. It's quite a deep fascia. So you've got quite a lot to play with. And then there'll be a 3B2 there, there, there and at the bottom. Because the 3B2 is just perfect for going through there for the horizontal ladder, fascia ladder, spar ladder. I don't know what they're called. But it's basically, you've got it. We're going to spar against the inside of the scheme. Sparring the cavity, that might be the way. And the ladder's coming off the spar. So you have four pieces of 3B2 sticking out and then the cut-off flush or slightly back for an air gap and then the fascia board attached to that. So that's all fixed in. That's done so we know what we're doing when we come back. It's took a lot longer than we thought but like I said, we've been helping with this. Setting things up, getting heights. So it's held us back a bit. But yeah, once this is finished, hopefully we'll get a good day in it tomorrow. If not, we've got work to do inside. We've got a door to block up and then the wall to take out. And the steel's going, the steel's getting delivered tomorrow which is 4.3. And this is 2, 4, 1 by 1, 4, 6 I think. So it's good to begin. I don't know what I'd say. Put them in that width because it's wider than the wall. Obviously the wall's 100mm. So anyway, ours is not too reason-wide. We just do as we're told. So I'm going to cover this up temporary, help Alex get tidied up, get it jointed last thing, and then off to get cleaned up for our birthday meal. Well, it seems we forgot to film an outro again. So from the office. Thank you very much for watching. If you enjoyed, be sure to give us a thumbs up. And if you're new to the channel and you want to see more, hit subscribe and tap on that bell. That way you'll always be notified when we upload. That's always a massive help and we greatly appreciate the support. This has been Brooklyn with Steve and Alex, and we'll see you for the next one.