CARDONE 100% New Auxiliary Coolant Pumps and Installation





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 28, 2015

Features & Benefits of CARDONE Select Auxiliary Coolant Pumps, and why you can install them with confidence. An installation overview shows the basics of how to install this part.

Installation for Nissan Pathfinder:
1) Make sure the engine and cooling have had adequate time to ensure a safe working temperature (1:20)
2) Partially drain the cooling system (1:26)
3) Remove the electrical connector (1:28)
4) Remove the auxiliary pump mounting nuts (1:32)
5) Remove both houses of the harness retention clip and inspect hoses for crack or deterioration (1:37)
6) Install the hoses onto the new pump (1:49)
7) Reinstall the harness to the mounting bracket (1:51)
8) Reinstall the pump using the two mounting nuts (1:54)
9) Install the connector (1:59)
10) Top off the coolant as necessary (2:00)

Was this video helpful? If so, make sure to like it, and be sure to subscribe to our channel.

For more technical bulletins click here: http://cardone.com/tech-help/

- Website: http://cardone.com/
- Facebook: https://www.facebook.com/CardoneIndus...
- Twitter: https://twitter.com/cardoneparts

At CARDONE we cannot guarantee against improper interpretation or application of the information we present in this video. You should always follow the enclosed safety guidelines, consult your OE repair manual for correct specifications when performing any install or repair procedure. Any injury, damage or loss that may result from improper use of tools, equipment, or from the information contained in this video is the sole responsibility of the user, and not of CARDONE Industries.


to add this to Watch Later

Add to

Loading playlists...