 Hi everyone in this video I'm going to be showing you how to make a good luck card using the six by six wiper card set and I'm going to be focusing on the lovely horse image there he's just very very fun so this is the paper pad as well I'm using this one here and here is that six by six wiper die set and you've also got the happy birthday and we're also going to use these speech bubbles which are throughout all of the die sets as well so what you want to do is you want to die cut the main section here so you'll want two pieces of that one and then I've got these here which are for your mats so I've done four in the mirrored card but I've also then gone and trimmed on my trimmer two pieces you can do four again if you want but I'm not going to decorate the back for the video but I've got two pieces here which are just half an inch by five by four and a half sorry and they're just going to sit you can see there on top and that's just going to continue the pattern onto the side pieces then this is that main front matte piece so you want to die cut one which again I've done in that holographic card and then using the paper here I've cut this to five and a half squared so it sits nicely on the top there also because I'm using the speech bubble I want it to look like it's floating so I've die cut my mechanism with some acetate again you do need to add some extra shims you'll need to maybe use a metal shim that is that piece done there using the mechanism and then there's the speech bubble we're going to do a bit of stamping so I will do that in a bit so I'm just going to run this one through my die machine and then we can start putting it all together okay so first of all we just want to fold and burnish these pieces here so you just want to do it so that the this inner score line is a mountain and then that outer score line is a valley and do that on both and then we're just going to get one of them so you've got one with them on your left hand side and one with them on your right and they will stick together like this okay so I'm going to show you another way to construct it all because throughout the videos I show you different ways to add that mechanism piece because you know I think between maybe the three or four different ways of doing it you'll find one that suits you best so first of all I'm going to stick down I always like to decorate any kind of kinetic card to do as much of the decoration before you actually construct it okay so that's everything stuck down there next before we attach the mechanism we want to stamp our sentiment on the stamp set here we've got all these different kind of titles so I want to have on this one galloping by to say good luck which I think I have somewhere else here here and pop it all on there but you've got why the long face there you're not that old stay called you've also got the and and high and it's your birthday and happy birthday so there's loads there to make up some really fun little sentences a bit of scrap card here but I don't need that much just make sure it's going to be enough for your speech bubble there and then I'm just going to bring in some of my ink and these are photopolymer stamps so they grab your inks really well and then just roughly I can see where that needs to be so I'm going to stick that one just there perfect galloping by to say good luck and now I can just pop this one down here and just with a little bit of tape hold it in place I'm just going to run that through my dye machine so okay so that's cut out nicely there and then I've got the mechanism piece so I would suggest is grab some double sided tape red tape's really good and you want the triangle towards the bottom left okay and you're going to just cover the triangle with some tape I'm just sticking it right across on my mat here just a couple of strips of that and then just peel it up from the surface there and just cut away so you don't use your best scissors for that and you'll have more time so you'll be able to cut it exactly but you want it just covering the corner there of that triangle make sure it's down towards the bottom left that that's the side that you're sticking okay so I actually continued putting this together and realized my camcorder had stopped filming but fortunately I was able to take it apart so you would have attached your glue or your red tape there to the bottom left hand corner of that triangle so make sure you're sticking on the same side that the sentiment is facing up there so I'm just going to take the backing off okay now I'm working on that front piece and this is the top so flip it over now you want to fold that back okay that piece triangle I'm going to just lay it in here first of all so we can move it around and you're going to make sure that the bottom of the mechanisms the bottom of this acetate is lined up with this second score line okay like so and you want to make sure that however far down it is here is you know from from the top basics it means that whatever it is you have on the top of your mechanism to pop up will be hidden so I mean you don't want to come too close to the top there because you might just still see it so I'm going to bring it down about half an inch there I'm happy with that where it is I'm just going to bring that across there like so and now there it is closed it will then pop up when it opens okay so next I can just add some glue for the second time onto these pieces here and I'm going to pop that one on this side so just put it in place there make sure it all lines up with the outer side and the top and the bottom like so and then while that one's just drying I can just add some more glue along this piece here okay and just kind of push that down make sure you don't get any glue inside the card and just lay that whole thing down so you have a perfect six by six square there you can see there now the pop-up piece is completely hidden and then when we open it up it pops up galloping by to say good luck and it will close nicely as well I think it's such a fun card really like this so next we just need to decorate the front so I have these pieces here which I've already stamped and coloured so I've done two of the four leaf clover I've done the lucky horseshoe the daisy and there is that really fun horse stamp there and I've coloured this all using coloured pencils again so I'm just going to start layering it all up I think I'm going to use again my foam because I do like to use that so we will stick him down first of all so I'm going to have him let's have him about there and then start building these up I've already added some shine to them as well I do like to add that to a lot of by stamped images I just think it looks really nice and the idea is is that the daisy will cover the ends of the clovers here so we'll pop that one there pop another bit of foam on that side I've got one there and I can just see there the daisy is going to cover that nicely and then I'm going to cut one of these in half and let's just have a look because I just want to have him kind of just poking out the side there so I'll just put foam on that side there and then on the other side I'm just going to pop a little bit of glue there so I can just kind of just pop that behind like so stick that one down there and then we just got to finish off with that daisy so again just pop a little bit of foam onto the back there and then just pop that one over like so and you can add some other bits and pieces to it as well if you want from your own stash you might want to put some twine around it and things like that but there is that card thing it looks really cool love the shine there on the clovers and then when you open it up galloping by to say good luck and it stands up really nicely there as well so that people can see your sentiment so that's that version using the six by six I've also got these ones here to show you so this one is using the funky flowers and it's got the happy birthday there that does also come in the dice set and again I just added some shine to that you can just see it catching the light I love this polka dot paper as well and then out pops this lovely bloom of flowers from the funky flowers stamp set and then I've also got fabulous flight here so I've used those lovely hot air balloons with that lovely cloud paper there in the background and then I've used glitter card on the happy birthday there and then this one you have the rocket you can just see there that pokes out the top which I really really like and then I've also got this one here again it's another favourite but it's using the lovely jerry the giraffe and then it says you're not that old happy birthday you're not that old really really fun great cards so that is using the six by six by set