 Γεια σας, είναι Vicky εδώ και σήμερα θα δημιουργήσω 10 καρδιά χρησιμοποιώντας την Αγωστή Κάρκητα από Σάη Μουσέ Σταμ. Φαίνω πολλές εμμείλες και κομμεντές που μου πιστεύω γιατί δεν έχω been posting lately και αυτό είναι γιατί είμαι στην Ελλάδα και χρησιμοποιώ μεγαλύτερα τη στιγμή μου. Αν βλέπεις εγώ στο facebook ή στο instagram, μπορείς να δεις φωτοσπωτικά από χρόνια. Λοιπόν, ας ξεκινήσω από να δεις έναν μόνο ποιό πόνο για να δεις πώς είναι μεγαλύτερα η Αγωστή Κάρκητα. Φυσικά, μπορείς να βρεις το σύμφωνο με πολλές εμμείλες και κομμεντές. Φυσικά, μπορείς να βρεις ένα στένσυ με αυτό το φωτοσπωτικό και ένα μεταλτάι που βρει το πόνο μέσα από το σύμφωνο. Δεν βρει το σύμφωνο, πραγματικά. Φυσικά, μπορείς να βρεις δύο μικρές εμπέσεις και πολλές εμπέσεις. Φυσικά, μπορείς να βρεις δύο μικρές εμπέσεις και πολλές εμπέσεις. Θα δείξεις πώς their are embossed with beautiful designs. Θείς να μεγαλύτεραστε το ντροθηκό και ένα πόνο με πόνο σύμφωνο. Και εδώ είναι ο καιρόδιο στον Ντροθηκό, που ήταν vient upon seeing what was inside the kit, as well. Again they are embossed and also you get pattern papers 6x6 pattern papers and you can see that they are mainly in blue white and red beautiful designs and they are double sided you also get four cardstocks one red one blue and two whites and just because i am creating my card bases out of them i'm going to add one more from my stash to create 10 card bases so let's start with card number one i am using this pattern paper and i'm going to cut out a rectangle and inside i have a die cut the star so you can see now that it doesn't cut out a star actually but rather those stripes i am going to place that on top of my card base but before i'm going to white emboss the sentiment so i'm preparing my paper and then i'm going to decide with what sentiment i'm going to go i'm going to stamp it with verse marking apply my white embossing powder and hit set it for my sentiment i have combined two of the phrases in the stamp set and first i have stamped u are a star and then i have stamped keep shining bright to stick this pattern or my card base i am going to use some foam squares at the back to add a little bit of dimension and i'm going to center it at the white card base so let's go on and make the second card for the second card i'm going to use this craft embossed pattern paper i'm going to cut out a rectangle and i am going to make sure that i get four of the designs from that pattern paper i am planning to die cut the star at the center but i will do it later on for now i am going to add a little bit of a distress ink i'm combining two different colors just so the card doesn't look so flat and by doing this technique you will see that all those beautiful patterns on the paper just pop up now i am going to die cut the star at the center of this paper so i'm placing it making sure that it's not going to move with a post-tape and now i'm going to create a shaker card out of it so i'm applying some tape adhesive at the back and then i'm going to stick there a piece of acetate so you can see that there are plenty of ways to use the star i'm going to show you three different ways on how to use it now i have added some foam tape around the star and i am also adding some tiny little sequence at the center and i have went really heavy with those just because i didn't actually want them to move but i rather wanted to fill in the whole window so i'm going to cover it up with a piece of blue scrap paper that i had from my stash i'm going to peel off the tape from the foam and also add a little bit of a tape adhesive and i'm going to stick it at the center of my card base now if you notice i have darkened up the edges of this card base just by using my distress ink that was included in the kit so for the sentiment i am going to stamp the saying on this scrap paper that i have from the previous card and i am going to white emboss it and if you notice i am stamping the sentiment just between the dots it's so thin that it fits perfectly there so this is going to match perfectly with card base the color of my card base and you will see that in this video i'm going heavy with embossing most of the cards do have some embossing here or there and i don't know why but when i was creating those 10 cards i kept getting ideas where embossing was a must so anyway i'm going to stick the sentiment at the center and i am using some tiny foam squares at the back and this is going to add a little bit of dimension on the sentiment so this is a great masculine card and you will see that in this kit just because of the colors i made many masculine cards so let's move on to the third card for the third card i'm working directly on the card base which is not something i usually do since i always love dimension so i am going to stamp some of the stars from the stamp set and i am going to make a nice and interesting background i'm going to switch from the bigger stars to the smaller ones and even the tiny ones where i am going to use to fill in the gaps once this is ready i'm going to use my white embossing powder to apply it and then i'm going to use my heat gun to heat set everything so here is the finished result you can leave it as it is or you can darken it up even more by applying some distressing i am doing so just because i can and because i had this mini ink pad on my card kit now i'm also going to combine it with a little bit of a black shoot dark colors really help those designs to pop up now for the sentiment i am going with one from the set that says though we are far apart we are sleeping under the same stars i am going to stamp it with versamarking on top of this vellum paper this is a thick vellum and it doesn't get too warped when you are using your heat gun over it i'm going to apply some white embossing powder and once this is a heat set i'm going to cut it out in a strip of paper wrap it around my card base and i'm going to stick it at the back i am going to use some regular tape adhesive for that but if you are you don't want to see that you can use a tape adhesive for vellum that it doesn't show so this is the card let's move on to the next one i'm using this striped pattern paper and i'm going to cut out a frame for that i'm using the stitch rectangles by simons s stamp and now i'm working on this white piece of paper i am going to emboss the stars that make this heart constellation and i am going to apply my red embossing powder now if you don't have a red embossing powder or blue like i am doing and using on this card you can just use your ink pads once that's done and a heat set i'm going to move on and do the sentiment for the sentiment i combined two of the phrases from the stamp set i combined when we are together and the other one that says i see stars so i'm going to emboss the sentiment with the blue embossing powder and i have also stamped some more constellations around the heart so i repeat embossing and applying my embossing powder and you will see the finished result here i'm applying some tape adhesive at the back of this panel i'm going to stick it centered at this red card base and then on top i am going to stick the frame for the frame i have used a foam squares at the back just to have it a little bit raised to add some dimension also notice how i have embossed a little star just next to the word star to make it shine even more i am using some wing of stella clear glitter pen and this is going to finish off the card for the fifth card i am working on my red card base and just to darken it up a little bit i am using the distressing that was included in the kit i'm going around the edges and you can see that it's not as bright as it was at the beginning i'm also using my trusted tag die and i'm going to cut out this tag from the pattern paper and from this leftover from the previous cards i'm going to cut out a strip that has the stars and some stripes of white and red i'm going to stick that at the bottom of my tag just to make it look more interesting i always like combining my different pattern papers and now i'm going to create some more elements for the tag i'm going to use this craft paper from the kit and i'm going to cut out the star so just because this doesn't actually cut out the star but rather creates those stripes i am going to use my scissors and go all around it i'm making sure that i leave a good quarter of an inch and once this is ready i can i will have an extra element to stick on my card now to do the sentiment i use the same technique so i am going to stamp the sentiment on some white pattern paper and then i'm going to use the scissors to cut it out so this way i am creating different elements as embellishments to stick on top of my tag i'm using my paper trimmer to cut out the half of this at the top and at the bottom and then i am going to use my scissors to cut around the word star making sure that it looks as if it is a sticker so i am leaving just the hair of white all around the word αν δεν είσαι σκοτή να μπορείς να το κάνεις σκοτή με τα σκοτή σας, χρησιμοποιήσεις ένα σκοτή, χρησιμοποιήσεις ένα σκοτή και μιλήσεις την χρησιμοποιή σας. So now that i have all the elements ready it's time to assemble my card and you can see how i plan to do it so just because it looks too empty at the background i'm going to use three of the stars in different sizes and i'm going to use versamarking to stamp the background and although i'm using versamarking to stamp them i'm not going to do any embossing i'm just going for the tone on tone look here so i'm going to use my crop a dial i have also applied one gold eyelet i'm going to add my thread and i have used some foam squares at the back of the tag to stick it down and now it's time to assemble all the little elements to stick the star i'm going to use at the back some glue and i am using my glue pen which i find really handy i got it from one of the previous card kits and i have used it so much so i'm going to stick it that there and now for the sentiment i'm going to use some tiny foam squares at the back and then stick it on top of the star to add a little bit of dimension now for this card i'm cheating a little bit so i'm using a piece of a black cardstock that wasn't included in the kit so i'm going to use a stencil now and lots of embossing powders so i am going to apply some versamarking through the stencil and i am going to create a really striking card by using bright embossing powder colors against a black cardstock and you will see what i mean as i move on so first i'm going to start with orange i am going to apply it and if you don't get the perfect embossing impression like you get particles from your different embossing powders all over it's not the end of the world because really when you see fireworks at the sky you really see lots of particles all over so i got the orange there and i am going to continue doing the same thing again and again but each time i'm going to use another color of embossing powder so i'm going with a kind of rainbow color here color theme here and uh i am applying again my versamark ink and this time i'm going to apply red and i'm going to continue doing so again and again so here is the finished result where i am uh uh heat embossing the green and the blue for the sentiment i'm going to use a word die that says congratulations that is from an older simons stamp release and if you don't have so many different colors of embossing powder you can really really create the same card by working on a white cardstock but using your inks just use a dabber to go through the stencil with your different ink pads for my card base i have created a black card out of a cardstock that i have added from my stash remember that in the card kit there are only 4 cardstocks and although i used to take the cardstocks from the kit and cut them in half to create 10 different cards i could only make 8 out of them this time so i added this one and that's why i'm cheating actually and you will see later on that i'm going to add one more so i'm using my uh gloopen at the back of the word congratulations and i'm going to stick it to the center and let's move on to the next card for this card i'm going to use this beautiful embossed honecombe i'm going to cut out a panel and then i'm going to use my distress ink the color is peacock feathers one of my favorite distress ink colors and i'm going to apply some ink on this panel this is going to bring up the design and if you notice i'm mainly staying heavy on one side of the panel and where i am going to darken it up a little bit with the distress ink that was included in the kit so now that the panel is ready i'm going to go ahead and work on my focal points i'm using some white cardstock and i'm going to stamp some of the star constellations i have actually stamped the larger star and two smaller ones but you will see that i'm going to use only two out of them i'm applying some color after white embossing the stars to bring up the design and to add some bright colors and once those are ready i'm going to use my scissors and cut them out while i am cutting i'm staying uh just a hair away from the embossed lines i did the exact same thing for the heart constellation again i'm going to cut it out notice how i go just her outside the line and these are going to be the focal points i'm going to stick them directly on my panel by using foam squares at the back you know i love dimension on my cards and once that's there i'm going to work on the sentiment for the sentiment i'm going to stamp it uh with versa marking on my black cardstock hit set it and then cut it out i have stamped the phrase that says when we are together i'm going to create a fist tail at the end stick it down with uh foam squares at the back and i will get asked what i do on the inside of my cards well i usually leave them blank as they are so that i can write my message but just because this has all those little dots at the end of the phrase i'm going to stick it at the center of my card base and on the inside i'm going to stamp the rest of the sentiment so i'm going to go with uh black ink and i'm going to stamp i see stars and i still have plenty of room to write whatever personal message i want to so now let's move on to the next card for the next card i have cut out a square out of the craft patent papers again i'm applying two different colors of distressing to bring up the design and i also want to cut out the stars so i'm measuring and i'm going to work on the back of those patent papers where there is no embossing i am applying my versa marking and i'm going to apply some embossing powder that is gold i am planning to cut out the star out of gold so that it makes a big impact now i am going to hit set it and i think that uh just because i wasn't crafting for a while since i was on vacation i really missed crafting and um my favorite technique is embossing so that's why i kept doing that again and again so anyway i am again doing the same technique that i did on a previous card i am using my scissors to cut out to cut around the star just to separate it and create a different element and this card is a great masculine card and you will see at the end that it looks like a sheriff badge so i'm going to stick that on a square card that's four and a quarter by four and a quarter and this is a card base from my stash and i was planning to stick that at the center but i thought that i needed to add a little bit more texture so i'm going with this canvas this is by team holds and it's um a self adhesive so i'm going to measure how much i want to cut out i'm actually eyeballing it and with my scissors i'm going to cut out a square where i can fit inside the star now i'm going to peel off the back and since it was too sticky to make my life easier i'm going to stick it on my craft mat and i want to have that frayed edge all over so i'm using my scissors to separate some of the threads and once i'm happy with the look i'm going to peel it off and stick it at the center of my square card and just to make sure that the star is going to stay on its place i am using glossy accents at the back and notice how it didn't go all the way to the edges of the star so that i get a little bit of dimension i'm going to add the sentiment on the inside since i have so much um texture on the outside and i went with the sentiment that said you are star for this card i'm going to cut out two uh rectangle panels out of those two pattern papers both rectangles are exactly the same size again i'm using the same technique of applying some distressing to bring up the texture the design of this pattern paper and uh i am going again for a masculine card and this is going to be a birthday card and uh since i have the first panel distressed i'm going to do the same thing on the second one i'm using the mini ink pad that was included in the kit i'm going around the edges and i'm going to blend in the vintage photo distressing that i have used on the first panel and this is going to help bring everything together really and uh the idea here is to stick one on top of the other and fold one corner like so but just because you will be able to see the back of the pattern paper i don't want that to be so bright so again i'm going to distress it same technique only at the part where it's going to show this is a great masculine card and also has a dimension which i really love now to make sure that this corner is going to stay there i'm going to use a brad i'm picking up a gold brad i believe yes and i'm just going to use my poke tool create a hole there add the brad and i'm going to use some tape adhesive at the back to stick one paper on top of the other i really love this color combination for masculine cards this is going to be a birthday card so i have used this die cut sentiment you can use anything you have really and i'm going to apply some glue at the back using my glue pen and you can really personalize this card if you have a number stickers you can stick the the years of the person you're giving the card to so i'm going to add some details with my white gel pen and i'm also going to add the dot for the eye from the word birthday that i have forgot to stick down and now i'm going to stick this directly on top of my card base and let's move on to the last card for today i'm working on a white panel using three different stars from the stamp set again i'm stamping them with versamarking i'm going to white emboss them and once the stars were hit set i'm going to reveal them by creating a night sky you can see on screen the three different colors that i have used for my night sky you can go as crazy as you want you can see how beautiful it looks as it is now but i decided to go ahead and darken it up a little bit more but really anything works for the sky now once i'm happy with how it looks i'm going to add a little bit of black only at the edges to help my sky pop even more the embossed areas resist the stressing but they will pop even more if you clean up when you are finished all those areas with a clean cloth just like i'm doing here so once that's ready i'm going to work on my sentiment and for that i'm going to stamp it on this speech bubble i am going to nest on one of those cloud cares the word you and this speech bubble comes from an older release by simon says stamp if you don't have this die you can just cut it out just draw a cloud and cut it out with your scissors and for this card i am going with a sentiment that says dreaming of you i used some tape adhesive at the back of this panel and i'm going to stick it directly on top of my card base at the center and then for the speech bubble i'm going to add some foam squares at the back i'm going to use my glue pen and i'm going to add those little dots that come out of the cloud next to the word you to finish off the card and to make it cuter i have punched out a tiny little heart out of red cardstock which i am going to stick just next to the word you and i'm going to apply some clear wing of stela glitter pen over the tiny little heart so now let's take a quick look on all the 10 cards that i have created today and i really loved this kit mainly because it inspired me to create some masculine cards that and i really don't have so many of them i really believe that this color combination of dark blue and craft is the perfect color for guys so now let's see my leftovers so i have some stash builders such as those mini distress ink pads the die and the stencil as well as the stamp set and i have a few leftovers from the patent papers and lots and lots of the embossed patent papers the whites and the craft ones to make even more cards so here are some close-up photos of all the cards that i made today and i hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel and if you need more inspiration here are two more videos where i am creating 10 cards using older simons stamp card kits thank you all for watching