Loading...

How to Convert VGA to TV Out - VGA to TV Converter Tutorials

328,235 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Dec 15, 2011

http://tinyurl.com/82xy89k
How to Convert VGA to TV Out - VGA to TV Converter Tutorials

While most TV sets are equipped with a composite input port, not all TV sets are equipped with a VGA input port. This presents a problem if you are trying to connect the video signal from your computer to your TV, because the only video output capacity many computers have is through a VGA port. Therefore, if you want to send the video signal from your computer to your TV, you need some way of converting a VGA signal to a composite video signal that can then go out to your TV.

Instructions:

Step 1:
Shut down your computer and turn off your TV before proceeding with your cable connections.

Step 2:
Use one of your VGA cables to link the VGA port on the back of your computer to the VGA In port on your PC-to-TV converter box.

Step 3:
Connect one end of your remaining VGA cable to the VGA Out port on your PC-to-TV converter box. Connect the other end of this cable to the VGA port on your computer monitor.

Step 4:
Plug one end of a composite video cable (the yellow A/V cable) into the composite output jack on your PC-to-TV converter box. Plug the other end of this cable into one of the composite input jacks (the yellow A/V jack) on your TV. If your PC-to-TV converter box is equipped with an S-video output jack, and your TV is equipped with an S-video input jack, you could use an S-video cable instead of a composite video cable to make this connection.

Step 5:
Turn on your TV and boot up your computer. Plug your PC-to-TV converter box into its designated power source and turn the device on.

Step 6:
Locate the "Input" or "Source" button on your television's remote control. Use this button to set your TV's video input channel to the channel assigned to the input port used to connect your PC to TV converter box to your television set.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...