 Hello, this is Nick from Laptop Media and today we will show you how to open the 2023 version of the ASUS ROG Strix SCAR 17 G733. To gain access to the internals, you need to undo 11 Phillips-head screws. The bottom right one is captive and it will slightly lift the plate up so you can begin popping the panel from there. You can start from the front, then, work your way around the sides and on the back. When that is done, raise the panel a little bit from the front side and detach the battery connector from the main board. The next step is to carefully pull out the two thin flat ribbon connectors that are powering the front RGB stripe. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. The connectors for the ribbon cables are positioned here. Here we have a 90-watt hour battery. If the connector is already unplugged from the motherboard, you just have to unscrew the four Phillips-head screws that are fixing the unit to the chassis. The capacity is enough for 7 hours and 42 minutes of web browsing or 4 hours of video playback. The two Sodims can handle up to 64 GB of DDR5, 4800 MHz memory in dual-channel mode. For storage, there are two M.2 slots compatible with Gen4 SSDs. The NVMe has a pre-applied thermal pad from below. Now, we can have a look at the massive vapor chamber cooling solution. Some of its components are visible, like the arc flow fans, the two heat pipes, and the four heat sinks. ASUS has applied liquid metal on both CPU and GPU chips.