 So this is one of these, um, chisels. It's called a flanger, um, dongle. Do I have any broccoli in my teeth? Yeah. You can't beat a flanger, donger. Your teeth are pretty large. Oh, David, this is a fine vintage. Then come on over and have a coffee. That's so irritatingly cute. Or what are you, charismaticly, challenging? You're charmingly useless. Great to be back. It's about time. Right off the bat, right off the bat. You know, time flies when you're having fun. Where are we? We're back here again and we did our first coat to just kind of seal it so that we stop any off-gassing from happening because it would, so it's basically alive, so that'll stop bubbles and kind of seal it, so it sealed it, so we don't lose a lot of resin just soaking right in. That's right. So now what are we doing? Today what we're going to do, we're going to do two things today. We're going to fill in our holes here with some silver resin tint, and then there's some spots here that didn't take the resin. Now don't get ticked off if you see this. We're going to fill these in with clear resin, just in these little craters and holes here in the wood, the natural formations in the wood that didn't take the resin. Okay, great. So let's get mixing. We already poured our resin and our hardener here. We did. Wait a minute. What? Did you catch that? I did it again. Clear resin first, right? We're going to fill in our holes first. Yes. With clear resin, and then once we've done that, we're going to add the silver resin tint to the remaining amount. Yeah, okay. What do you think? Can't wait to watch. I know. Oh, watch. That was a good one. Um, do you think people will get annoyed with Oliver Pines? Yes. Thoroughly mixed for three minutes. What do you want to talk about for three minutes? Um, I don't know, you can tell jokes if you want. You have one? I do have one. Okay, go. What does a clock do when it's hungry? I don't know, what does it do? It goes back for seconds. Oh. That was good. Anything else? Um, what did we- Oh, you do have more. I do. Wow, you came prepared. Yeah. What did one clock say to the other clock? I don't know. You're really ticking me off. Oh, I should have known that. Daylight savings time? Oh, yeah. It's interesting. It is. Why don't you go ahead and do those voids there? Okay, and it doesn't matter if it runs over, right? Because we're going to sand it down anyway. We're going to belt sand this. So, well, Joanne finishes up. I'll talk to you about resin tints. So, take a look at that. See, this is silver. So, there's sediment at the bottom. And then the oil. It's an oil-based product. So, if you want to mix it in, there's a little ball bearing in here, that the tip is you loosen the cap a tiny bit until it's an air in, and then you shake it. And that makes a world of difference. You hear that ball bearing? So, now, perfect. Beautiful. I'm going to put a bunch of silver in here. I'm going to put a lot. So, I'm just mixing that in there, and that's good enough, I guess. So, now we're just going to fill up these holes. Ah, that's so cool. Let's start with 12 o'clock and move around the clock. Oh, what's that one song? About clocks? Dancing around the clock tonight? Rock around the clock. Rock around the clock. Ooh, let's think of clock songs or time songs. Oh, Coldplay has that song called Clock. Are you right? Yeah. Hmm, what else? Doesn't share how that sounds. If I could turn back time. So, that's way too much, but we're going to belt sand all that off, and... That's pretty cool, huh? Yeah, super cool. So, that was my next one. Time after time. Who's singing it? Sing it out for you. Are you ready? I'm ready. Oh, yeah, that's amazing. Okay, oh, wow. Okay, I think we're done here. Let's hand it over to our sponsor. Until next time. Until next time. Stay on top of the time. I suck at this. Pounds are hard. I know.