 We just used four methods to make three tumblers and we'll show you how we did it right now What is up welcome back Do you like to do it yourself build it yourself or make it yourself so do we and we're always doing something every week We have a new video, so don't forget to like Subscribe share tell your mom tell your granddad tell your meal man. So anyway this week We've had a request for a new tumbler, and if you've seen our previous video We had a tumbler fail, so we're gonna attempt to make a new tumbler for Four new tumblers go bigger go home since we weren't able to do the first one. We decided we're gonna do four of them All right, so let me tell you about the tumblers We're gonna make four different techniques to make a custom tumbler. We're gonna use our cricket to cut a stencil We're getting ready to go on a Holiday cruise, so some of these things are gonna be Yes New Year's cruise centric, so This one is a mermaid one. We're gonna use our stencil here, and we're going to spray paint The stencil onto our tumbler So that's the first one The second one is a tumbler. I started the last time we did this After the last video we used a new resin. We got a lot of tips So we tried a new resin it came out a little better, but somebody lost the footage. It was deleted. I Deleted it. I didn't think you'd actually use it. So I accidentally deleted it so What I've done so far on this tumbler months ago was I added Mod Podge glitter and one coat of this pour-on resin and so what we're going to do today is finish this tumbler This is where I started it was the birthday gift. I talked about in the last video that she never got We're using this cricket clear sticker paper And we've done a print-and-cut on it with Winnie the Pooh And we're gonna attach that sticker here and add another coat of resin squad goals hashtag squad goals All right, the third technique you can tell in this one we found this double-sided adhesive and we made a Stencil well pattern. We cut a pattern out with the cricket and we're gonna lay it on Pull off the adhesive pieces and sprinkle on glitter see if that works and then we'll pour some resin on it the fourth and most difficult technique Going big Is water slide paper? So this will be the first time we're going to try water slide and while you would normally start with a You know small image We're wrapping the whole tumbler Total tumble wrap. Yes. This is the requested tumbler. So We're gonna do that one as well. So tumbler number one. We're going to use our stencil and our spray paint So we're gonna have to put this outside and start with step one All right first We're gonna lay down a quick base coat of white to make the sparkles stand out and then we'll come in and we'll spray in an ombre fashion the blue and the teal That's right multiple coats Multiple coats. I'll tell you how many when we're done. I think the parts part is going to be put in the stencil on Way to clear. Yep. Oh stencil the up Now we're gonna go paint it We're just gonna lay down a base of the white real quick a quick way This one is our easiest one. It's a print and cut clear vinyl sticker Then we're gonna put on this tumbler It's a whole lot easier. I Think stickers on we cut out double-sided adhesive and we're gonna try to put that on a tumbler That's another first and add glitter on the adhesive section So we're gonna pull the yellow back off first. All right, that stuff was easy Yeah, that was pretty easy. Now we're gonna lay it down. You still have the weight on the front Now we're just gonna we're gonna pull up the letters that we want glitter on first So but just one color at a time just one color at a time. Do you want to do black now? Okay, that's coming off easier. Let's do this. Well, we're gonna use silver Come on. Let me in there Yeah, hope that that Now we're doing a water slide you printed it out on this water slide paper And we gave it a dusting a couple of dustings three three dustings Clear coat and now we're gonna put it in the water. Yep. This is Cut your design out, but we're gonna leave it like that wrapping it fill your bowl with water Submerge your pre-cut decal for 30 to 60 seconds removed from water 60 seconds mm-hmm. All right, so I saw a Pro tip that said if you can slide it just get part of your edge exposed Mm-hmm, and then lay it on here and wrap it and then pull the paper as you wrap it. Do you think all right? Let's do it. Let's do it. All right. Has it been were you ready? It has been hold on I did time it. Yes, it's been 45 seconds. Let's see if this corner goes Do you feel it getting slimy or anything? Yeah, it's slimy You slimy look at the colors. I hope that's okay. I Think that's because it's separating from the paper. Oh, I stopped timing. Yeah Did we leave it too long? It's not coming off the paper. It's like falling apart Here try this No, I think I sure yeah, it's falling off the paper. It's falling apart Are you sure this side is the adhesive side or whatever? Nope, I am not Don't you love it when we make up our own rules? See, it's slimy. I don't know Hold on you can work it. I've seen them work it Work it babe Something isn't right. That ink doesn't look right Let's doesn't look right like the ink is all like Did you see the back? All right, look the back is It's not what we expected and the ink it's like separating we even sprayed it like they said time for some epoxy We only have a one rotisserie So I'm gonna try the paint on method She's gonna rotisserie hers Oh, let's remove the The spray paint templates here All right, that's the spray paint one I think that one was the best the spray paint one looks the best. It was the easiest I'm pulling out a little things was was difficult, but not nearly as hard as this one Oh, that one was pretty easy. I take it back the sticker was the easiest. I haven't been able to find my torch So we're gonna have to use a heat gun All right, you want to help me mix this thing up? Yep Equal parts of this one So we got them off the rotisserie the one on the rotisserie looks very smooth very even Pretty boss Then we tried the two that we painted They came out kind of puckery so We threw this one on the rotisserie and gave it another coat and it kind of smoothed out But it still has these drips at the top And this one we didn't put on the rotisserie yet and you might be able to see those dimples so they kind of dimpled We'll show you some close-ups. Yeah, we'll show you some close-ups and it's got all these drips on the edge I was gonna try to cut off So while he attempts to cut his finger off, we will go through Talk about the four different methods that we used so this one We'll show you another close-up is the sticker paper and this method worked perfectly We just printed it out. We did a print and cut on the Cricut attached the sticker and then added another layer of A Poxy epoxy. Thank you and added another layer of epoxy So we had the first layer on remember we mod podged we added glitter We added epoxy let it dry added the sticker sticker added a second coat of epoxy and let it dry worked great I might have used the white print cut instead of the clear, but I like it It gives it that like ghost look everybody's glittery. It still looks good This is the method for this tumbler for this method. We use the Stencil we created a full vinyl stencil. We attached it to the cup. We spray painted it We ombre it. We use two different colors of glitter spray paint Let it dry peel the vinyl sticker off. We did it a little bit and then well, then we tried the paint method of the epoxy and Decided to go with the rotisserie, but it looks great that worked out really well and that was relatively easy Oh, that was the easiest one and then this one is the double-sided adhesive paper this is using the silhouette paper is the one we found and We were able to cut it on the Cricut cut out the design attached the adhesive and Then we pulled off letters one by one for the color that we wanted to do so we were able to do multiple colors on here and That worked out really well. Although that one was extremely tedious. Oh, yeah, that one was the hardest I think the print and cut sticker was probably the easiest followed by the spray paint. Yes This I probably won't do again. No, I'll just spray paint it Do the same thing a spray paint in half the time and the water slide We might have been overzealous with the full wrap on our first try that was a mess and I think I think if you saw the video the ink started to run a little bit and I think we didn't use the acrylic clear coat On that one so the ink started to run so that was also a lesson learned We'll try the water slide again. I have a whole pack of paper. So I definitely want to see that work whole pack of paper All right three out of four ain't bad. That's right Good job, baby. All right. Do you like to do it yourself? Build it yourself make it yourself So do we so if you want to see more projects and you're not yet subscribed Go ahead and hit that subscribe button down below and remember to hit that bell to be notified of our new videos each week Before you go check out one of these other videos over here over on this side. There's a subscribe button other videos to watch subscribe button