 What's up everybody? Welcome to the edge of tech. I'm Jim and this is the brand-new bamboo lab P1S I am super stoked to have this thing on the bench today And we're gonna do this in real time. We're gonna unbox this thing and set it up in real time and Man, we're gonna see how it goes. I think it's gonna be a pretty awesome machine from what I understand It's an enclosed P1P, but we're gonna find out. So we're gonna do this together in real time No editing no cuts no anything special like that just completely Seeing this for the first time together So Again, this is the bamboo lab Leases today and there goes my camera for some reason Not sure not sure why Super weird let's figure that out, but We're gonna pop this bad boy open and hopefully that doesn't happen too often and In the top no top-down camera today. We just got the classic bamboo lab wrap which is full of Some good old-fashioned wrappings So corner protectors, which is awesome to see Classically the bamboo lab is wrapped in plastic inside So you have to pull the plastic open Actually like that a lot in case the box were to get wet or something like that, right? So let's see. Can we just pull this out? We can Look at that Look at that So I'm gonna leave it right there for now. We're gonna leave it right there for now Inside the box. We have some more bubble wrap that went all the way around the printer. I love to see this Since the very first one I got Last May they have really stepped up their game as far as packaging. So oh, we got some more filament We got some support for PLA. We got some PLA green it looks like and some PLA basic orange Which is great. There you go. That's what those look like there and If you didn't already guess it This does come with the AMS combo kit. So That's what we're looking at here. It looks like they packed the AMS inside Which is which is normal. They've done that on other machines Pretty much anything that ships with an AMS So here we go moment of truth As we see this together Man, it's black. I could tell you right away. It feels Like a plastic I'm guessing like like the X1. I'm just guessing because I don't actually have an X1 I have some X1 carbons and I have the the P1P But I don't have the X1 So, yeah, that's what it looks like super nice I really love the look so far right on the top is a get started little booklet Here so I'm gonna fold that over and I'm gonna take the sticky off that It is fully taped up as you can see there we go Ooh the bamboo lab logo there. This thing is very slick looking. It's like it's like the dark mode model of the X1 carbon, so You know, I like it So if you're watching this at home currently, I'm actually Recording this early so I can release it on release day. I literally got this Tuesday and It is Tuesday night at about 10 19 p.m. My time But I don't think we're allowed to put videos up until they release maybe on the 13th and it's currently the 11th So I could be wrong about that if they release it early I'll drop this video early, but I did want to do this. So if you have questions, we're gonna do this live Questions and answers so shoot them out there while we're going along and I'll do my best to answer them as We go along and watch me watch and watch me with this So the top Comes off and there's a lot of plastic cover on it here and It looks like it's kind of like in a plastic envelope Which is good nice nice packaging You get stuck in my hair there so I Would suggest highly suggest a knife if you can see right Right here, it's kind of hard to see there's actually Some foam like built into the packaging so I have not seen a recent X1 I haven't seen any of the recent machines get shipped to me with like the recent packaging or any of the updated Stuff like that. Everything I have is is Everything I have that's new has come since the p1p or hasn't come since the p1p was released So I know people in the chats were talking about You know how they stepped up their game for packaging too. So it's good to see It is good to see the first one. I got if you remember last May Had a big dent in the back of it So this one not so much no dents. We'll get to the back of it though man this this Plastics on here. I probably should have just cut it all the way through But there we go try not to get too many fingerprints all over it as I Pull it open It is glass I'm pretty sure yeah, that's definitely glass. It's kind of a smoked look I like it Cool cool cool We're gonna go around the printer here and get some more of this tape off Because we can get the door open and see what the stuff's made out of Again if you have questions shoot them in the comments while while we're going along if you're watching this during the During the live stream debut if you're watching this after that throw your comments in the comment section I do my best to report respond. I can't always get to all of them But I I want you know, I try So there's that Again, there's a door as you can see very well wrapped. There's more foam pieces right here in The door, which is great Not sure how we get to this out though because it's not to turn this towards me Cool It's it's actually lighter. I think it's lighter than the X1 carbon Mostly because I believe the body is gonna be plastic of some sort There we go That's not too bad slides right off and I can kind of show you from behind These little pieces here. They're like foam You know, so they're they're really stepping it up as far as trying to protect these things and shipping Which is great to see if I flip this back around towards you you see the Front door now It is also a glass Inside we have our AMS as you can see there and in the top If I can flip this down for you to see everything is packed in Right in the top as we've seen before in in other printers so Let's start unpacking So we are about eight minutes and 27 seconds in again, I'm doing this In real time. There's not gonna be any editing. There's not gonna be any anything like that This AMS looks updated from the ones I have to just from first glances Which is nice to see I'm willing to bet I got to unlock it From the bottom probably a giant pack of desiccant and I want to jump over to the bamboo lab P1S combo P1S combo, let's see That's the booklet right so Here we go There is an unlock in the front To unlock the AMS. It looks like so we're gonna do that I Just got to turn it towards me so I can actually see it. Ah, yeah the two Turn it towards you you can see the Careful there you can see the two red arrows in here Those tell you where to unlock it I've always liked that they did that they make it super easy for us to Unpackage these I believe It's gonna be a two or two point five find out Do you have to turn it so I can actually get to it Let's see what we've got here. Oh is it to It says it to it is it to So we will twist those out and unlock them Again, we're doing this live no cuts. So there's no b-roll in this video. There's no like cutting angles Showing you anything. We're just gonna do it So I got the first two screws out that should allow our Put those over there that should allow the AMS If I turn that towards you to slide and it does boom And We have one brand new P1 s ams. I think it's just a new AMS system Let's see. Does this have a version on it just for argument's sake Model s a zero zero one It does not say if there's a version number on the bottom But hey, you never know. I thought maybe somewhere it might maybe But very very light. Wow. I might have to check this against my original one Um, because this is super light. All right. What else do we got here? So the next thing we need to do is get uh, the bottom locks off Like normal and then we need to get the cardboard out and pull the lock out and then connect our AMS so pull these Bottom locks off pull the head of the aim up the head of the machine out there. There we go Good cardboard down If you have not seen my maintenance video on these it is so easy to do maintenance on these machines It is so easy don't forget your sticker on the Hot end. I if you notice some of my videos, I forgot that for a long time For a very long time. I forgot that. Okay So now I need to go in and I need to It looks like unlock a bunch of these Hoping they're the same size You might have to lower my desk To get to it Let's see My little guy turned my power off here Gotta unlock my desk so I can lower it So I can get to it Here we go Now it'll be a little easier for me to get to and it looks like there are one two three four Bolts don't forget to take the foam out of your poop chute Very important. You don't want a foamy poop chute Am I? Oh, is this the wrong size? I wonder if they changed the size uh On me Nope, I just had to just had to actually get it in the screw So I'm just going to unlock the four bolts that are holding the ams mount down There's one I believe that one's completely Unlocked now and this is more tricky to do like this Then Then you know here. So it does look like there's a side fan in this just so you know And a light Let's see. There's a side fan a light And a camera A side fan a light and a camera in this. So I believe they started putting the camera and the Light in the p1p's Wow I'm doing a real good job here of unscrewing this. All right I love using these t-handles, but sometimes We should just grab out my my regular old My bit drivers because it would make it a little easier, but Slide that over for me No, now I gotta find this one That one is tricky almost we got Almost three of the four screws done. We're 14 minutes in and that's with me talking. So It's not that bad this one. I can't see Where are you? There you are So once again, if you have questions about the p1s, I will be on live answering these questions during the Viewing of this video After that, I'll do my best to answer any questions in the comments. We can in the description. You'll find a link It'll be an affiliate link Obviously to grab one of these if you want to Or any other bamboo lab products It definitely helps the channel out and I really appreciate it So close so close I got one that's like a couple threads from being Out so something I noticed right away With the enclosure this does have a built-in cable chain on the that did not come on the p1p before Um There we go There we go. That's the bracket that mounts the p1p Now we're going to have four bolts Or four screws in here that lock that build plate down so it can't move during shipping There is a little piece of styrofoam right there So we're going to release these four bolts real quick too So you have four bolts for the ams four bolts for Uh the Locking down. Whoa locking down the build Area here the the build plate And I'm doing a really good job of being backwards here Trying to show this I should grab a little light and try to pump some light in here, but we're almost done Um I don't know I believe this is literally an enclosed p1p Um, so I know a lot of people wanted an enclosed p1p. You know what there might be only two Nope three. There's only There's only three not four. Whoa Again with this, huh? There we go Sorry about that Now, you know, I'm doing it You know, I'm doing it in real time here because um Something's up where it keeps dropping me Um from this side It doesn't do that during our hot makes monday show So it's got to be something From this side of the room We'll find out. Uh, it's very interesting That it does that Again, it doesn't do that during hot makes so Makes me wonder What could be causing it? Maybe it's a cable I know I bypassed the atem mini today Um, I have an atem mini right over here. That's like a video switcher And it's been giving me a lot of craziness with color And flashes so we bypassed that I have a new piece of equipment That should be here in the next couple days Thank you amazon prime days Speaking of amazon prime days, hopefully you got some cool stuff if you needed any cool stuff Wow This is much harder To do this from this angle Okay, second screw is just about out There we go Last one is all the way in the back in the so it's like a triangle, right? So it's all the way in the back If you've unboxed one of these before it is just like we've seen in the past I'm gonna spin this around in the sake of time and Try to do this quick Try to do this as quick as I can um This might be better to done with one of my bit drivers, but Trying to do it with a t-handle Because I'm I love t-handles. I love them Check out the amazon store for Tool, I think it's under tools or something. Uh, it's in the description below and you'll find the t-handles that I use Um, they just make life easy Unless it's this position So let me know in the comments right now. Are you excited for a new a new bamboo lab printer? um Knowing that this is probably This wasn't the big one everybody was waiting for but this is Uh, a new one and that's a big step Um, that's a big step So I see something else right away I could tell you that this does have the carbon, um filter in it So it is if there is a filter I just pulled the tape off of it And opened it up and there is a filter in there So this does Sorry, my mic got crazy This does have a filter in it being enclosed makes sense So we are all unscrewed. I'm gonna get the last piece of foam out I need to raise this bad boy up in a second here Um, but first we need to put the screen on it looks like I'm gonna turn this back around towards you guys Get that out of here Have a quick drink So Our ams Wow, this comes with a lot of stuff You know what this comes with a whole bunch of extra ptfe tubes I I can't I don't know if new ones have been doing that And if they have that that is awesome Um, but I'll show you what I mean in a minute Once we get Once we get this thing on On and ready to go Okay, I'm just gonna get rid of the t-handle so we're rocking it. Um Now it says we need to unbox everything we need to put the So the next thing it says to do is put the ams on So We're gonna follow their instruction Again, it does have a cable chain in here, which is really nice. Um one thing I Did on my p1p as I ordered the cable chain for the p1p and uh, yeah, so it's kind of nice that this one comes with it Glass top goes on there like that makes sense because they have these parts, right? These are already parts that they have Um now what we're going to do I'm going to spin this around so you can see the back This what do you think about this shell this color? but um And I just saw that happened It is crazy. I just saw the camera go out like that Um So maybe it's not my maybe it's not the atm any maybe it's uh something else being crazy Because something is causing that to happen from this side of the room. Okay Let me know what you think of the color. I I actually dig it a lot Um, like I said, it's kind of like the dark mode x1 carbon So there's the back. We have the buffer tube the poop the poop shoot here And we're gonna, you know, you'll mount your Um Spool holder here Uh, what it wants us to do right now is put on our ams So we're gonna do one of these sweet sweet poles For all of you guys that like that boom boom boom A lot of plastic on this. All right, so Look at that. Look at that colors together That looks so good Very cool so There you go Pop that out like this And this comes around and plugs in to your buffer tube like that In a second here, I'll grab some more parts out of it So inside More stuff taped down. It's a whole bunch of spare parts Uh, I say spare parts. It's spare ptfe One long and a whole bunch of short ones So if you need to replace the ptfe tubes that are in here, they give them to you now That's pretty dang awesome I like that a lot. Um You know, like I said, I haven't had a new one of these in a long time and It is really cool to see You know the changes that they're making I think that they're making really good changes as they go along and There you go. Look at that These are these are desiccants and they're in plastic So I popped open those trays on the inside of the ams If you do this, don't forget to take your desiccant out of the plastic I know some people left theirs in for quite a while before they realized They were in plastic. I got those comments on the videos in the last year here I'm just going to pop these back in because That's what you do They're just little covers that go if you have not seen this They're just little desiccant covers. So they sit inside and they clip in and in your desiccant You know just just sits in there some people print. I've showed this before on my Upgrades video some people print A piece that allows you to put Loose desiccant in which is great as well So we're at about 25 minutes a lot of me talking a lot of me Fumbling through those screws backwards so I could still try to get you guys a shot from the front Which I normally wouldn't do if we were just putting them You know printer together, right? So I got my ams cables This box comes like This I'll package to nicely Does have a glue stick It does come with hey, you know what? It does come with a gold Textured pei plate here Look at that It's like a gold color Wow I haven't seen that either. Um I still have the original black textured pei plates So there's that So We'll get that going in a second. Man this camera What is happening stream stream labs? He can't is Um, I have a capture card That runs from here. Well this cable runs down that way and then it goes into a capture card But you think if the capture card was bad It would do that from monday show hot makes because I use the same capture card for that and this has never happened So now I'm beginning to think I have it straight in over there. I guess I don't know we'll find out so Um, it looks like we got a couple cables here So they gave us Cool just making sure. All right. So the the four pin goes under here like this Is it still backwards? It is still backwards and this one Goes over here I could see like Hope like this Nah, I can't be right. I think I have those backwards I do have them backwards Now the fun part of getting that one out real quick Idea win-and-doubt A little plastic clip And you got to push the little lever in there. Oh, maybe Wait a minute. Oh, they changed it on me Yeah, they changed it on me. Okay For now, we're going like this I'm good with that. It's probably fine I don't know if it's backwards or not, but I should have looked should have looked first This one here goes from any either side of this AMS Down around And into The buffer tube Just like that. AMS is officially connected now Okay Now it wants us to put on the spool holder So we're going to do that Just got to be able to see it. Hey, the screen is here. The screen is the same just so you guys know screen is the same Um people are going to either love or hate that I don't mind it. It doesn't bother me Mostly because I never use it. I send everything from Either bamboo studio or orca slicer Straight to the printer and I almost never Use the screen The only time I think I use the screen is maybe when I'm changing filament I think that's it So I need the t-handle again because we need to screw in our Um Let me add here. I need to screw in Our spool holder, which is just that piece there Just like the other ones These sit in And it looks like they didn't change this much It's one thing that I kind of wanted to change on Um, I forgot I got to take this one out. So there's one screw you take out Like that. It's a shorty and then you replace it with One in your spool holder. Now if you're never going to use this spool holder, you don't have to do this part Some people will and some people won't so Yeah, if you're not going to use it don't put it on that's fine It's all good Here we go My t-handle for the win on this one because it's long enough to go all the way through there and And suck that in so I don't believe I'm going to need these anymore But just in case I'll leave them out. So that's on now I got the uh heat bed unlocked Insert the lcd is next And that's it Is it So I want to see what they include in this uh We're going to look and see what they include as well in here, but we can pull that There we go Let me just Check how we're doing we're doing good still there Camera I mean doing as good as it says we're doing right So I just pulled the cover off of the Screen some people will be freaking out right now, but that's okay Let's turn this back around So our screen is going to go In the same place right here And it's just to pull off that Also, it looks like there is sd card in here by the way um So there's that I don't know if they started including them before or not That I can't speak let me know in the comments but there is one and it's uh Hard to read here Micro sd I cannot read it. It's so dark and the writing is so light That is crazy Um I have no idea how big this thing is We'll check it when we Fire up the printer. How about that? Backwards when you put it back in so the Uh front of the card goes this way so the card's backwards if you're looking at it So now we're gonna Get our screen This may be the trickiest part of everything right putting this little cable in the screen Whoo Especially if i'm doing it like this because i'm kind of backwards, but it just pops into the back of the screen Like that And we're in Now I made fingerprints. So there's that The little cables they just kind of Uh kind of kind of sit in the back of the screen. There's a part for them And I definitely put some Fingerprints on that bad boy So we're gonna We're gonna clean that off this thing is brand new. We don't have fingerprints, right? So there's that And at this point Uh with me talking with me messing around We're built. It looks like about 30 minutes. Um But that's also with me trying to do this Backwards while i'm filming. So Let's take a look what comes in here and let's pop this back up to normal height There we go Get up there There we go. So There we go bamboo lab p1s It is super sick looking. I love I really like the color I know that doesn't matter a lot a lot in 3d printing And with the p1p you can make any shell you want. That's one of the best things about it, but glue stick power cable Um a whole bunch of stuff here So a really long nice allen wrench if you want to get those screws out with this Um, there's a couple of allen wrenches a nozzle cleaner And then in here, let's see what we got in this bag So this is a bunch of lubricant grease so They actually are giving you a whole bunch of stuff here. So there's some extra wipers These these gold ones. There's four of them Like this you can kind of see them against my shirt or against here This is lubricant grease Um, that's what it says on here, which when you're doing your maintenance That's awesome. It's one gram each it says in this bag. We're going to have some uh terminal grease here I'm sorry thermal grease. I read that wrong. So when you're swapping out your hot end, I think Um a whole bunch of extra parts for extruder for hot end So there's extra parts here It looks like there is the classic razor for your scraper highly suggest Really seriously highly suggest printing this it's a model that's already on Um, I just found another one of these so they give you five one gram pieces of lubricant um Printed phone holder. There's a a kit here for a printed phone holder and If I remember right if I pop this open Um Two more blades So there's two more cutting blades in here too So they give you a pretty good amount of stuff now one thing. Um, oh, I I stand corrected Hang on. Let me let me drop all this stuff back in here Let me know in the comments what you think of all the stuff so far They gave you a whole bunch of lubricant grease. It's a thermal paste Uh Two two wipers a bunch of extra screws and bolts the scraper blade Um a phone holder piece So there's that um And On the other side here. I just noticed it It looks like they're giving us an extra hot end It is So this is The bamboo lab point four hot end. It's a spare hot end Um, if you can see that it's kind of hard to see There we go So awesome, you know what I need to put another one in my Uh collection, you know, what's interesting is this is different. Let me see something I don't know if you can tell Very easily But this one here is one of my originals. It's black This one here is the new one and it's not so much black It's like a I don't know It's like a gunmetal. I don't know what color this really is. It's like I'm going to go with gunmetal. It's like a It's really cool looking Um, so cool extra nozzle extra nozzle. Jeez extra hot Um, you do have to remove the fan and stuff from the other hot end to use this I have a video so check that out. It's super easy. It's five minutes or less Um, I'm going to toss some extra screws in here So I don't lose them in the shop. So the next thing all we got to do is link this thing up glue stick. You're going in We need to power it on make sure it powers on link it up to Our software might my account first I think and then Check it out. So let's see we're going to power bind it power it on bind it It says take out the desk in don't forget that in your ams if you get the ams with it And we're going to rock and roll through bamboo studio While it's powering on Let's see here we go cool While it's powering on we will read an email. That's where that's what I was doing. Okay So I'm going to move this over here. So it's a little bit closer to my power and There we go I'll move over the other side there so I can see so There we go. Good for the light. It's powering on first time So, uh, I kind of went through everything it came with we unboxed it. We got it ready And a nice big piece of desk ink comes in the packaging um If you have questions at this point, let me know again If it's not during the live viewing, uh, I will respond to them in the comments if you drop them in the comments So I need to see what's going on. It says before first use Make sure you've read the user manual. Good Wait three seconds. Good I'm going to get my app ready um Speaking of my app, it looks like my uh, it looks like morpheus just finished in the other room One thing that you'll know with uh One thing that you should know with these if you don't know already is there's something called bamboos bamboo studio is What you use on your computer bamboo handy Uh is for your app On your phone tablet that kind of thing Please make sure that you've removed the screws done it Uh, let me know where you are. We're in north america now I want to It wants me to scan the qr code on the screen, which is standard Um, you can do setup later if you want if you want to keep this thing offline that kind of thing You can do setup later. Totally fine bypass it in my case we're going to go To me we're going to go scan a qr code And i'm not going to show you said qr code just in case, uh, you know You want to get in It says confirm to bind Tap to pair with the uh printer pair and connect Oops just pair There we go Just giving us a number here Yep pair There there we go and now it's asking for your wi-fi so i'm just going to drop my Uh wi-fi in You do not have to do this just a heads up You do you don't have to do this um Now i'm questioning myself if I just put the right wi-fi password in anyways Um, it'll let me know if I didn't but you don't have to do the wi-fi You don't have to bind it like this you can do setup later go right into the printer and start using it with an sd card Um So there is that So now it's doing the binding I'm pretty sure I put the password in correctly. So we're going to find out in a second Please confirm you've removed the Lock screws There's one two and three. We're going to say we have Finally, let's run the self test and i'm going to spin that around so you can see it happen We're uh, you know, we're pretty good as far as This video goes now it's going to run through the self test um And we're going to be set up. We're going to be ready to go um I'm going to pull the foam out of the bottom here when I can That it's doing stuff inside there we go Man, this is a nice looking printer a little bit of tape over here And I didn't get off there we go So once more time if you have questions about the bamboo lab p1s shoot them in the chat now Man so far so good. This is literally business as usual so far. Um I I mean this is It enclosed p1p. Uh, I like Actually, I really like the color of the case. I just I don't know why I like the dark color um It matches the p1p, right? The um AMS looks nice. I'm almost I want to check this This might be bigger This might be bigger than my original ams's um It's interesting because that would be that would be a good thing that would mean they they made it wider for more spools to fit Um, we'll check that out. We'll check that out. You'll see a video soon probably on that um But it's running through the self calibrations now And we're rocking We are rocking cool And this will integrate this is going to integrate right into bamboo studio It will you know, it'll integrate into um Orca slicer once they once they add it as soon as bamboo studio releases the um Updated version of bamboo studio that has this in it, right? I'm thinking orca orca slice will be right behind um Yeah Very cool It looks good Looks like it's gonna function good. I I mean obviously we haven't done any tests yet But I wanted to give you guys a first look. I don't want to make this too long Um, but this is the first look of the bamboo lab p1s unboxing quick set up quick and Yeah, now we're just running through calibrations. I'm going to get this bad boy printing And we're going to go from there, but um I think it's nice If it performs like a p1p, we don't have any problems, right? I like that some of the colors are different the hot end color was different the The um bed flex bed Or the flexible build plate. I'm sorry. It was was like like gold color instead of black. Um I don't know if they've been doing that for a while or not. I should probably look into that But like I said, this is going to be unedited uncut. This is me Walking through things the like like I'm seeing them first time like you are right now. So Awesome, it looks great I think uh, we're going to let this thing calibrate I'll get some prints going and I will get them out on the social medias as soon as we can We're about halfway through the self-test as you can see the little arrow there um everything inside Is is plastic? Just a heads up on that. There is the fan. Like I said, there's a light Everything else looks looks the same I mean It does have the filter which is good to know if you're wondering if it has the filter It does come with the built-in filter. Um, which is great Yeah I think we're business as usual bamboo lab Uh, nice work on this. We're going to do some test prints. We're going to get this thing rocking and rolling And you know, we're going to check it out But if it's you know, if if the other printers that they have put out are any Indication of what this thing is going to do. I don't think we have anything to be worried about. Um So call me a fan boy. Call me whatever you want right now I tell you what I've had really good success with all of my bamboo lab printers. I have several now. Um, and I you know what I've had awesome success. They're perfect Printers to start on they're super easy to use the slicer makes it easy the printers make it easy Um, if you're not a fan of the of the screen, that's okay Again, I rarely use it. I send everything from my computer to Uh, you know to the machine. So there you go But this is the bamboo lab p1s. Thank you guys for being here. Thank you everybody for spending a little bit of time with me Questions drop them in now or drop them in the comments and I will get to them as many as I possibly can And uh, you'll probably see this thing pop up some more coming up in the future. So stay tuned I'm sure there's going to be a bunch of videos on this today. Uh, When this goes live so everybody have a great one. Thank you so much for being here once again Keep rocking keep printing and uh keep coming. I really appreciate you guys being here. See you guys later