Loading...

6527 5216 6116 | LaserTools Wheel Stud Master Re-Threader Kit

1,769 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jun 8, 2016

‣6527 | Wheel Stud Master Re-Threader Kit

‣Wheel stud master re-threader kit for use on vehicles that use wheel bolts

‣For repairing damaged wheel stud threads internal and external on most passenger cars and light commercial vehicles
‣Size range: M12 x 1.25 (spare die Part No. 0052), M12 x 1.5 (spare die Part No. 0053), M14 x 1.5 (spare die Part No. 0054)
‣For use on vehicles that use wheel bolts Applications include: M12 x 1.25 for PSA, M12 x 1.5 for Mercedes Benz and BMW, M12 x 1.75 for Volvo and M14 x 1.5 for VAG models
‣Supplied with grease Part No. 6380 and spare O rings (3)
‣Associated Laser products include Part No. 6116 and Part No. 5216 Due to the nature of the products these tools are consumable

∙5216 | Wheel Stud Thread Restorer Kit

∙For repairing damaged wheel stud threads using a reverse action to ensure the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm | M12 x 1.5mm | M14 x 1.5mm.

∙For repairing damaged wheel stud threads.
∙Size range; M12 x 1.25 (spare die part No;0052) M12 x 1.5 (spare die part No;0053) M14 x 1.5 (spare die part No;0054)
∙Spare O-ring (part of 10) part No; 2560
∙Ensures alignment of existing thread.
∙HGV Kit available with M18, M20, M22 & 7/8" Dies - Part No 5924
∙Laser’s new Wheel Stud Thread Restorer (part no: 5216) is designed to correctly align and restore damaged wheel stud threads. The split design allows the two halves of the thread restorer to be fitted to the good thread (normally at the base of the stud). The 24mm hex adaptor is then fitted over the two halves of the repair die and wound back over the damaged portion of the thread, straightening and restoring it.
∙The set includes three split dies to suit the most common wheel stud or bolt sizes: M12 (1.25mm pitch) M12 (1.5mm pitch) and M14 (1.5mm pitch).
∙The same method is used for wheel bolts secured in a vice.
∙The wheel nuts or bolts will now run cleanly and safely to secure the wheel.

◦6116 | Wheel Internal Thread Kit

◦For use on vehicles that use wheel bolts
◦Applications include: M12 x 1.25 for PSA, M12 x 1.5 for Mercedes Benz and BMW, M12 x 1.75 for Volvo and M14 x 1.5 for VAG models
◦Associated Laser products include 5648 and 5216
◦Best results when used with an impact gun
◦Packed in a blow mould case
◦Due to the nature of the products these tools are consumable

www.lasertools.co.uk

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...