 What is up Hot Makers? This is Nerdy J, straight from the Hot Makes Studios. I just made that up. This is Shannon, how you doing Shannon? I mean, it could be a studio now, I guess. Sure, Nerdy J, Hot Makes State, I mean, how you doing? How you doing? I'm not in California anymore, so. Yeah, you're not stuck in California. Yeah, I guess it's a good thing, I mean, California's not a bad place to be stuck in, but it is when you don't have a car. And yeah, I was doing good up until like five minutes ago and apparently FedEx doesn't know the difference between Pennsylvania and Missouri, so. What? I'll recover, yep, so that's another week delay in my arrow progress, but it's fine. How are you? I'm sure you're better. Oh, it's another great week. I can't complain to be 100% fair. I got it real quick before we go any further. David Wilson, $20 already to the PayPal. Thank you so much for the Oreo fund. You guys are like on top of that. For the black and white Oreo fund, I love that. And then also Andrew, $10, thank you from Andrew and his notes were, let me just see cause he always has fun with that. Oh, he doesn't have one, no message today, but we're gonna pretend it says something like the Shannon printer fund or something cause that's usually what it says. He just did it really quick under the table because of the Council of Andrews is currently in session. Oh, oh, oh, Council of Andrews is here. But no, it's been another gaggle of Andrews. The gaggle, we have a gaggle of Andrews. David Wilson and Andrew and the Council of Andrews. Thank you guys so much. I appreciate that. Funny story about David Wilson. I got your stuff finally, David. From Christmas, I have been working north of my house in like an hour and 10 minutes since before Thanksgiving. So today I came back, I'm at my new, I'm at my normal location now finally, I'm back there. And I'm like, you know, I'm gonna go check out the PO box and guess what? David Wilson sent me a card and a Christmas treat and I appreciate it. Thank you so much, David. Also, I got the other box you sent too. I'm gonna hold off on that. I know it's gonna kill me to wait for a week, but I have a reason you'll see tomorrow in the video post. So I've got to hold off on your box as far as the other thing you sent. And then we'll go for it. It's not really a secret if you follow social media, but anyways, but another great day. Well, let me jump in real quick. Yeah, jump in. I don't wanna miss it. We got a rate on Twitch. Woo, we got rated. Yeah, AstroKinner sent over 23 people. Thank you. Nice, Astro. Thank you so much. But I'm super good. I'm back at my normal location, which means about a 20 minute drive versus an hour and 10 minutes one way. So I'm super happy to be back and I have a little more time now. But other than that, working on some cool stuff, there's a link in the description below. If you wanna see all of the links for the HotMakes, they're out there already. You can follow that Google link and check those out. All the cool stuff we're about to see. Also, like David and Andrew, consider donating to the channel if you want to. There's a Oreo fund or whatever you wanna call it fund. It doesn't matter. There's a PayPal link in the description below. And I think Nightbot might be blowing it up. And I just realized my Nightbot is probably blowing up if we're streaming on my channel too. So let me fix that real quick. Also, what else we got? What else we got, Shannon? What are we at? Are we at episode 99 right now? 99! Am I correct? I have to question this because my head always tells me that we're like one or two behind. For some weird reason, even though it clearly says 99, but you know, it's fine. So I don't know that we're gonna make our 1000 goal on the main channel, but we tried and we won it eventually. We'll get there. But yeah, make sure you guys are on the main channel as well as everywhere else that we're streaming because I know we're on Twitch. I know we're on Facebook and all that fun stuff. And we appreciate the raids as always. Shout out to that again. Just kind of like consolidating a little bit on them. So I'm aware that we're only rating one channel right now. But thank you guys. Hey, guess what? Andrew Osmond, 20 bucks is super sticker. This is, you are amazing. So Andrew Osmond, thank you so much for that. With you. Which one of those is it? What was that? Oh, it's me, of course, but. Oh, yeah. It's a challenge for the Council of Founders. Yeah, nice. Well, we appreciate that Council of Andrew. We're about to step up the game today. We have an amazing guest on. We've been working on this guest. It's no surprise. It's Chris Riley. I'm super pumped. But we've been, I mean, years, years. I had to personally fly to his house, take him to dinner. He's in the green room right now with nothing but blue M&Ms. I'm lying. I don't even know if he eats M&Ms, but. Yeah. I love it. So Chris Riley will be joining us in a moment. But first, before he joins us, we got to talk about next week. Next week is Hot Makes 100 episode anniversary. 100 episodes. I need like flashing lights and all that happy stuff. That'd be awesome. So we are going to do some cool stuff for that. We got giveaways. We're going to have a bunch of giveaways, one being a 3D printer that will be open to the world. I know we don't stream at a optimal time for a lot of people on the other side of the world. But if you are here and either Amazon or Creality ships to you, you are eligible to win. We'll make it happen. And that just gave a hint away. It's an Ender 2 Pro. We're just going to say it. We're buying. The show is buying. It wasn't donated. The show is going to buy the Ender 2 Pro and donate it or give it to the winner. I'm sorry, because of all the awesome contributions you guys keep doing every week. Also, we have four winners that are going to receive co-ex filament. That will be USA only because it's super expensive to ship or roll a filament outside of the US, which is weird. Also, something super special for everybody. I don't know, Geary, do you want to talk about this one? Or do you want me to talk about it? Do you talk about it? I'll just pull up the pictures. All right, you pull up the pictures. We have something super, super special. Shannon, I don't know if you've seen these yet, but we have some special merch that's going to happen. And we're going to have, how many winners on the shirts are we going to do, Geary? Throw that on me, on the spot. We probably should have talked about that at the time. Yeah, yeah, yeah. How about three? Okay, three. Three works for me. That's how we talk, right? So we're going to do three winners that are going to get special edition hot make shirts. We're going to have them made. We're going to send them to you. They're going to be 100th episode special edition. They're going to have hot makes on the chest like you're seeing here. They're going to have 100th episode on the sleeve. Can we see the sleeve picture? Boom. That'll be like 100th episode on the sleeve like that. And your winner's username from Facebook on the other sleeve. Twitter, Facebook, whatever you want to use or just your name if you don't have any of those. Nice. So we're going to have a username, whatever you want or your name. And it'll be up to you, whatever you want on the other sleeve. But we're going to do three winners on those and they're going to be custom t-shirts. The Gaming Ham 99 cent super sticker. Thank you so much. I appreciate that. You are awesome. You know what we're going to do? We're going to go ahead. No, I just wanted to explain a few things with us real quick too. We're going to have normal shirts that are going to be available for sale at some point. We don't know how much they're going to be, but we're going to figure out those details and post them on social media between now and next episode. These are just kind of like an inaugural shirt. They're like the first shirts that are going to be made and they're going to be the 100th episode. And they're going to make some stickers for them too. That was a lot for an AI to say. Do you want to say? Gary, the world. Gary is the most long-winded AI we have. But these are going to be as long as it can be maintainable. These are going to continue to be handmade for each order. So just in the nature, in the name of the show, they're going to be made in-house. Yes, it's going to be awesome. And so three people are going to get the special edition 100th episode shirts. And someone asked me if this is going to be available for the world. I am saying, yes, I have not talked to the team on this. We are going to make the shirts available to the world. Pretty sure we didn't talk about that yet. But we're going to do it anyway. We're going to pay for the shipping. And anybody can win that. It doesn't matter where you are. So we're going to get some more info up that. Gary's been hitting the computer juice again. We put too much of that new coolant in him. And he's like running nice and cool today. It's like, not. Oh, not. OK, well, then he didn't. He could talk forever. AI's don't run out of breath. Nice. So what we will have, Hot Make Shirts coming now. It's got, you know, they've been long asked for and awaited. So we're going to get those going. They're going to be something like this, except for, are we going to do any more 100th episode ones? We're going to do like a small round of them or something? No, these are going to be made specifically for these three people. These are the only three that will exist. So we're just going to do three of those. And then we'll go from there. But it's going to be awesome. So we have some cool prizes that we still have. I'm still waiting on a couple of companies as far as some prizes. So there might be more prizes for the 100th episode. And we have a special guest that will be joining us, which is going to be super cool, too. So we're pumped. Anything else? Did I miss anything? I don't think I did. I don't think so. It looks like a perfect. It's like, I don't know. I'm watching Twitch. I'm doing multiple things right now, but I'm paying attention to you guys. But I tell you what. Excited to talk to our guests. Speaking of special guests, ladies and gentlemen, the most sought-after guests we've gone after, one of the best, the first channels I ever saw in 3D printing, and one of the most technical channels out there, if you want to get some stuff done. Also, Benchy Stacking Champion 2019, 2020, 21. Ladies and gentlemen, Chris Riley, how you doing, Chris? I'm doing good. That was quite the intro. I made the Benchy Stacking Champion up, but it sounded good. I don't even know. It did sound pretty good. I don't even remember what my record is. I think I've, like, all the teens somewhere. Oh, I thought you were in the 20s, though. Hey, for all you watching, check this out. This is an authentic Chris's Basement shirt, circa 2019 IRF. There you go. Chris, how you been, man? Man, I've been pretty good. Hanging in there. I see a lot of friendly folks in the chat here, including Dave Wilson. David Wilson, yeah. Dave is a big part of our community, but he occasionally stops by my house, and we talk about 3D printing. He lives, like, right down the street. Yeah. That's awesome. He, earlier in the chat, before anyone was here, he's like, two of my favorites, Jim and Chris, are going to be on the same stream. And I mean, he has, he sent me something, well, the clock that's, you can't really see, because it's dark, that's hiding right here, was the first one he sent me. But he's been working on some really cool stuff, and he sent me another one, and I'm super pumped to get that thing out and show it. Canadian 20, Bad Hock LT, thank you so much for that, by the way, but, man, you've been putting out some awesome content. It's been, how long you've been out there on the YouTubes now? Man, it's, we're getting close to five years. Wow. Nice. That's awesome. I couldn't even tell you, like 400 videos or something, I have no idea. That is super cool. I mean, and that's the thing. If we took, if we go back and actually took our live stream, like this kind of live stream, because for the longest time, you were fun in the country basement, right? You guys did that every Sunday forever. And, and, you know, if you, if we took those off, because I know you guys streamed that on your own, on their own channel though, right? Yeah. In the country basement channel. That's right. So if we took all those off, like to go back and actually look at the, how many videos you just produced yourself, it's like, hmm. Yeah. When I first started, you know, I was doing like two, sometimes three a week. And then I cut back to two for like a year and a half. And now I'm down to one. I've been at one for a while. Yeah. Well, one a week is, is, that's a pretty hefty ask already. I mean, especially as technical as you dive into, right? I mean, you know, me, I'm like, here's how you unjam a new sprite extruder from Creality. And Chris is like, let me show you how to unjam it, reprogram it, put it on a different printer, calibrate it. And you're like, you're, I mean, you're like the go-to for any of that super technical stuff, which is what we all need really to be honest. Well, I like to, you know, it's one of the things I like to go towards the hardcore 3D printing people. Right? I mean, it's like, you know, that content isn't for everybody by any means, but man, if you want to know about it, I will tell you all about it and waste a lot of your time. Because it's just once I get going, down the rabbit hole, it's like, oh, they need to know this. And they need to know, and then the video is 45 minutes long. Yeah. And then, and then you're looking at it, like, what can I take out? I mean, like, No, everything has to stay. So what's funny is, like Caleb, getting Caleb edits my videos and I'll send him something like that. And he'll be like, how can I knock this down? Like, let me find all the ums, the dams, the craps, the, you know, the pauses, everything I said four times, probably like without the video where I repeated myself a few times, like, you know, and by the time I get it back, it's like 50 minutes sent to him and like 20 minutes or something of all the garbage that he took out. But then that's just like, I literally, go ahead. He's over exaggerating. I think, I think the last time I talked to him, he said that sometimes it'll be like 16 minutes taken down to 10 or something. Yes. Well, sometimes you take it down to five. No, but what's interesting about it is, like behind the scenes people, you know, we don't see, we probably have a couple hours of shooting or something for just to, you know, unjam that sprite extruder would have taken me 20 minutes, you know, just myself, but then filming it, you got an hour and a half into it, you know. Oh yeah. It gets ridiculous trying to film something that, you know, should be relatively easy. And I don't know about you. Like for me, I've got content, like videos that I've tried to finish multiple times that I've never got done. So I'm going like seven. Yeah. I was like, I'm just never going to get this done. And then. I feel that I do that all the time. And then I just kind of like wind up in a folder and I forget about them for a while. Yeah. Well, and at some point it's like, you might as well not even try because it's way past relevant, you know. And I was like, it's never just to tell them that. And then at that point, you're like, I could do a better job if I just started from scratch, but that's a lot of works. I'm not going to do that. And yeah, it's like a loop. You know what I say? Let me know in the comments. Everybody out there watching, we need to see an unreleased films version of Chris, you know, Chris's basement. Like all the unreleased stuff. Let's see it. I'm ready for the gritty reboot. There you go. That would be pretty interesting. Right? Like the unreleased files. I honestly, I think we would watch it anyway. So I'd say do it. You know, it'll be like. And the next step in a video just ends. And we'll all be like, what the heck? Oh, you don't know how true that would actually be. Right? We do have a question here. Derek says, what's the one printer you'd never give away? I know this is the enter five, isn't it? I know. I'm just joking. Dave has that. So of course I have to say log, right? So if you don't know or you're new here and don't follow me, log is the Prusa machine that I cut by hand with a jigsaw out of plywood. And I kind of started the channel with it. It was like my fourth video or whatever. And it's been seeing punishment pretty much. I still do it. I still get it out, install new boards and do different things on it. So log will have to stay here forever. Well, speaking of log, what about the hang printer? Does that still hang in there? It's still up there. You probably can't see it in the shot. It's still up there. I still bumped my head on it three times a week. But I was just thinking about, I always said I was like, well, I should do this and I should do that, but I never have time to do any of it. And I just skip it. But I was like, I should get that out again, line it up and try to do another print. But there's also like, mine's like a version 2.5, let's say, but there's a three and a four out. Oh, wow. Torbjorn's the guy that did all this stuff. And I thought about, man, I should get with him. We should do a four. We should bring it to Murph. We should do all this. We should do, and it's just not enough time in the day. Speaking of Murph, you gonna be there this year? I will be at Murph and Earth this year. All right, all right. Let us know in the chat if you'll be at Murph and or Earth. And if you're pumped up to see Chris, I know I'm shooting for both. I know I'll be at Murph. We'll see about Earth. My goal is to be there. I already took it off work and all that stuff, but, you know, life. So not taking the wife and the two year old because she doesn't want to chase him around while I walk around and film or something all day. And then like, what's he do when he's done not trying to touch everything there? You know, last year Murph was like a swimming pool. He had like probably an inch and a half of water everywhere. And like, I can't imagine. She's like, I'm not bringing him there if it's gonna be like that because he'll be running around soaked, you know. So we're gonna try for Earth as well. I'm trying to get her to come anyway because I think it'll be a lot of fun, but. But. Well, spoilers for Murph this year. My wife will be attending with me. This will be the first time anyone has ever seen my wife. So, except for Dave Wilson. He does come to my house. Yeah, there you go. Dave Wilson's like, what do you mean? I saw it. He raised his hand. She doesn't exist. Dave can vouch for me. Nice. Everybody's saying if they're gonna be there or not tripod said not talking about the swimming pool. Yeah, tripod went down. I felt super bad and he was okay. He was okay. But he went down one of his tripods like just folded in on him and. No, we had a good time. I'm super. That's awesome that you're gonna be there. I think this year will be much bigger than last year. They have a much, much larger building than the years past like you've been in, right? Yeah. So that was pretty cool. We got it. We got to talk Shannon into getting up there or over there if she can get out of where she is. And maybe we'll have to do. Listen, okay. First of all, I don't trust flights right now at all. What? What? It depends like you said on life and stuff. I have like no money at all right now guys, but I want to meet you guys on person. So we'll talk about it. We'll work on that. We'll figure it out. Shannon, Chris got stuck in California for like four days or something. Like three additional days, which isn't sad. I want to move there, but it was boring without a car. That's what I'm referencing. But you know what, all week flights, I don't know, sorry, tangent, but like we had a convention here and a half the guests didn't come because the flights are canceled. Like it's still an ongoing thing. It's very, I don't trust airlines. What is Murph and where is it this year for the new people? So Murph is the Midwest rep rap festival. It's in Goshen, Indiana. And if you like Amish people or a small city, it's at the fairgrounds in Goshen, Indiana. It started a lot, more than a few years ago, Caleb, he was part of it, the guy that edits my videos. And they started in a garage as a barbecue. And then all of a sudden it exploded to this massive thing. Like 2019, you were there too. It was absolutely nuts in 2019. You remember that? I mean, we couldn't walk anywhere. And I was like, here's me with 400 subs. Like my first Murph ever. I see Chris Riley standing there, you know? Murph is crazy. Cause like the first time that I went, I just went to walk around. You know, I wasn't anybody and nobody knew who I was. And then I find out it was like, half these people know who I am. I mean, it was the craziest experience that I've ever had. You know, it's like, people actually watch your YouTube when I'm on it. I mean, it didn't, I didn't put it all together. And then the second time it was, I think I went 18 and 19. And yeah, it's like you go in the morning and you're in this sea of people. And then it's a blink of an eye. And at night it's just, they all follow out the door. You know, it's like, it's just constant talking to someone. I have no idea where I'm at the whole time. Right. And if they bring back the tacos and tacos. Well, yeah, tacos, tacos, that's the best part. But I mean, this, the building is so big. It's a really nice size building now from last year at least. And I'm just hoping last year, I think it was so cold. And then it got really hot the week before and it just, all that moisture came up through the concrete. And we're hoping that doesn't happen again, but you never know. They also have crack donuts. If you've never been to Goshen, Indiana, you need to go there and get a crack donut. I don't, did you ever have any of those crack donuts? Oh no. They are glorious and very addictive. Little Caesars is not tacos. Yes, they did not have tacos last year, Dan. They definitely brought Little Caesars in though. But yeah, it was a lot of fun. It is really a lot of fun. You can see, I mean, all, like a huge amount of the community shows up from all over the world. And I know we have people coming in from outside of the US this year. There's already, you know, lots of talks of people coming in. So it's gonna be really cool, you know, to see everybody for Murph. And Andrew Osmond for Shannon Murph Travel Fund, $50. Yeah, I can't even like commit to that though. I mean, I appreciate that, but I still don't know how much money I'm gonna be. I know, but I'm gonna be moving. I'm gonna be like. Yeah, you're gonna be moving to Murph. To be fair, to be fair, Shannon, you know, he used Google or YouTube. Thank you so much, Andrew. Thank you. It's like $20 you really get. No, thank you so much, Andrew. You are awesome. Council of Andrews is here today. But no, you know, it's such a good time. And are you doing a booth or are you just hanging? Yeah, I will have a booth. We're gonna make the drive. It's like a nine hour drive for us. But we're gonna drive up and bring some stuff with us. So it should be a good time. That's gonna be cool. Just get some practice in on your way and just ride a horse and muggy all the way to Indiana. Yeah. I, you know, this last last year, we got a Airbnb, like a little bit in the country from there, maybe like seven minutes from where the fairgrounds was. And I had never seen so many buggies ever. It was, it was ridiculous. It was so, it was awesome to see, but at night it's the, you know, 11 o'clock or whatever you're going home. And I'm like, oh, buggy, you know. But I know how to get Shannon there. What's that? The council, the council of Andrews can make her an honorary Andrew. And they have, and they can hold, they can hold a session at Murph. So she has to go. She's obligated to at that point. She's obligated. Honorary Andrew. Somebody even tell me what weekend this is. Can we start there? I think it's the last week of 24th. 24th through 26th. Really the, it's really the 26th and 27th kinda like half day. I mean, I'll pencil it in, but I have absolutely no idea what's happening after the first weekend of June. But I'm gonna add it to my calendar now so I can stop asking you guys. I know, I know we usually do this later, but I have to shout. We've been shouting everybody else. Stephen Lyons, $5 Oreo fund. And what else do we got here? The bring Shannon to Murph on another $9 or $10. I mean, from another, from the same Andrew who gave us 10 already before. Yo, we had a good time. Stop worrying about me. And Stephen Lyons is also another $10. So you guys are hitting up the PayPal's here. Nicely done. Yeah, you guys are awesome. We're gonna get her there. But anyways, so what's new? Do you have anything you can maybe spill the beans on? You don't have to. You don't have to. Yeah, I'm really not that interesting, unfortunately, as far as content goes. I got 112 people watching right now that are saying different, you know, you're welcome. I've been told people that can also ask questions in the comments, guys, if you have them, please remember that. Yeah, so I guess we can talk about something I did yesterday and I broke Twitter and I didn't. I don't know why. Oh, okay, I'm interested. Yeah, so I get these whims, you know, like we're makers. We just do things for fun. And I enjoy posting on Twitter because all the engineers come out instantly when I post something like, well, you shouldn't do that. Yeah, absolutely. All the experts. That's how it goes, right? But all I did was I took a piece of plastic and I put it on 101-inch marbles and then attached rubber bands down to the table and put my printer on it. So, and I called it the shaky table and I said, have you ever done this? And you can see it dancing. It almost makes you seasick to watch, honestly. That video in one day has 30,000 views on Twitter. I'm like, why? This is one of the weirdest things I've ever done. It's phenomenal. Let's just get a little action. There you go. There you go. It's almost a truffle shuffle. It is almost a truffle shuffle. There you go. There you go. Yes. Mm, yeah. You see that printer shaking? Yeah, baby. Yeah. Oh, yeah. I thought this was somewhat interesting, but yeah, I don't know why people really dig it, but it's still going crazy for some reason. I mean, to be 100% fair, you did post a video. You said you've been testing all day. Here's the two. If anyone wants to try to compare. I mean, to my naked eye, I don't see much difference. Yeah, so I mean, and you really, again, this is like, you know, like when you really start, like getting the microscope out and looking at this stuff, right? Right. So the really the only thing you're going to notice is the ghosting, and it doesn't actually get rid of it. If you look real close, it pushes it out. So like if you can see next to that S where you can see the S is repeated over and over and over. Yeah, so the shaky table actually made it whiter. The oscillation. Interesting. And then the bottom one. The only thing that I notice is the T, honestly. Yeah, and if you look in the arms of the Y, you can see that Y over and over and over. So I mean, I guess you could say it improved, like to the naked eye, it probably improved the print quality, but it actually just kind of changed it a bit. I don't know. It just changed it. It was just a, it was a really interesting, again, I had like five minutes of free time and I slapped that together. I was like, I wonder what will happen. Yeah, he's. And so now I got to do it. Are you on the TikToks? I am not on the TikToks. I feel like you need to like condense that until like a like 15 second video, speed it up and put it on there. Cause that would, yeah. That would get a lot of attention. It would, that would, I mean, it blew up the Twitters. It would probably blow up the TikToks too. Yeah. Well, that's true. Hey, wait, is this, is this on a pooch table? I don't know. The chat will probably, I don't know if you ever heard of the pooch table, but. Hey real quick, David Wilson, Shannon travel fund, $50. Y'all, like Sarah is literally telling me right now, like what is going on? So like even my co-host in my streams is like, y'all need to chill. We're going to set up like all the, the phones behind us. And we're going to be like, if you call right now, you can. Anyways. But I mean, a pooch table, pooch was on a stream of Joel's 3D printing nerds. And he, they put together this, this makeshift like wooden table. And it was the rickety as shaky thing ever for, I believe he had a, like a Prusa sitting on it or something like that. And then it became the pooch table. And it just kind of went for there. Like all the jokes. Everybody's saying to each table's folks. Where'd you put the shaky printer on a pooch table and see if it cancels itself out or if the world just doesn't watch the world burn. It's like, I mean, would it go straighter? You know what I mean? But no, that's super cool. I mean, it's so funny, Chris, that it's the most unexpected thing that just does that. Right? 100% agree. Last, was it last year? Man, I think last year we did, clock spring put together a torture test called a torture toaster for us. And it was, you know, he, Sven designed it all and it's a toaster. When it's done, you can actually raise the toast. You can flip open the doors and there's dials and levers. And it's actually pretty challenging to print. But I printed a really big one, did like a TikTok that I didn't know what I was doing, pulled it off the bed. And then that TikTok has almost a million views. And I'm like, I probably should do this again. And I probably didn't post since then, but it's like, I did not expect that. And then a lot of people was funny is I've 3D printed for years. There's no way that came off the bed in one piece. And I'm like, I mean, if you 3D print it for years, you know that that's the only way this could have worked because you couldn't put it together like that any other way. But it's funny, like you said, when the engineers start popping out, the vaccine or that, whatever, yeah. But I mean, any cool stuff besides that that you're secretly not finished? That's secretly not finished at all, so many things. Or what do you want, here's another question for you. What is the video that you wanted to do, referencing the last video you posted about what you can do with your channel that you haven't because of the channel? Does that make sense? Yeah. That's a tough one, right? You know, I've honestly, because like machining and manufacturing I'm fascinated with stuff like that, right? I don't know a ton about it. And I've done a little bit of machining over the years. But I'm nowhere near proficient at it. But what I would like to actually do is like do a roadshow. Like Chris comes to your shop. You show me what you do. Metaform is here in town. They make the pico hot in and I've been to their shop. They've got like a Swiss lathe. But I was like, okay, I come here. You show me what you guys do. I'll film it and we'll put it on there and see what it does. But I think that would be the most entertaining for me, anyway. That would be awesome. We actually talked long ago with this show is like, man, if we could just, if we could get to places like that. And when one person's here and the other person's like at the place, they're doing this live. I have, I don't think that would be near the reach of an actual video, but it would be super fun. Like on location, you know. There you go. You could be our new reporter. Like on location with Chris Riley. Yes. Ladies and gentlemen, Chris Riley. Oh, sorry. No, that would be such a fun. I mean, you see like dirty jobs, right? Mike Rowe did that for so many years. And he did so many things. And it would be super cool to do that in the maker world. Hit maker spaces. I feel like it would be like a cross between that and like American Pickers or something. Yeah. Where y'all just like have a truck and just take everything they don't want because I know that you're gonna do that. Wait, whoa, whoa, whoa, whoa. I think I speak for Chris when we say we have enough crap. We don't need crap in here. We can say that all we want, but yet it still piles up. Oh, it's this bad. I'm taking a tour of the facility and you using that for her. What was that? I just never mind. I got it. I followed. Thank you, Shannon. I appreciate it. I'm sorry. I missed what you said. This is why I have a problem with humans. Like going to other people's shops though. I mean, the biggest problem, me going to your shop, even like going to Merfer Earth, it's like I walk into your shop and the first thing they say is, you know, our 3D printers doing this one thing and I can't figure it out. And then they look at me like, it's just bam, fix. It's like, I don't know. Yeah, I just make videos. I don't actually know. Chris, here's something for the chat. What Chris doesn't know is my help at the Edge Attack is forwarded to Chris's email. No, I'm just joking. I'm joking. But that would be actually really smart. You're like, why is everybody calling me Jim? What the hell? I've been mistaken as Jim a few times. Oh, the hair. Yeah. You know what's funny? I wish I would have thought about this to find it. I have, it was a chat on Facebook from a guy that said, man, did you change up your shop? What happened to the basement? And I was like, the basement? Oh, you know, I was dying. And it came from one video or a live stream. There's a live stream where I put my hair in a ponytail. That's where it came from. And then all of a sudden he was like, did you change your shop? What happened to the basement? And I'm like, what is he talking about? And then I responded. I said, oh, I'm Jim. I'm not Chris. He's like, oh, I'm so sorry, you know, it was. You two should show up to Murph, like cosplaying as each other. So like Jim put contacts in and put your hair in a ponytail. And then Chris put your hair down and put on a pair of fake glasses. And then, Jim, you can wear that shirt. And then we can make a detect shirt for Chris. Yeah, I'll grow the goatee out, you know. There you go. Oh man, I'm crying. That would be funny. If you guys want to see that, let us know in the chat. Show up to Murph. Boy, I'm going to even be upstaging cosplaying now. Speaking of comments, how's the comments going? The hot makes episode before Murph or directly after Murph. We can just bring Chris on. Instead of Jim, the whole episode. Yes, that would be amazing. Everybody's saying do it. There's no question. Chris can carry Oreos and water. Oh, here we go with that. Jim and Chris walk in with each other's wives, too. Oh man, how tall, I'm not, I don't think I'm near as tall as Chris. I'm only six foot. But you're what, six-two? Yeah, I'm just a touch over six-three. Six-three, holy. I knew you were taller than me when we met, so. But you know what? I think we just have to wear some platform boots. You know, I don't think people would pay attention to that, to be honest. Oh, I pay attention to platform boots on you. Oh, of course you would. I would only wear thigh highs. But you see us in the videos, you have no reference on how tall we are. I mean, to be fair. So that would be, I mean, no one would ever know. Oh man, we might have to pay Chris to do this, but it might happen. Chris is like, why did I come on the show? There's a reason I've been saying no for two years. No, I'm just happy you got a little time. I know you're usually busy on Mondays, so again, I really appreciate you being here. We joke a lot. This is what the fun part is, because you know, the community gets to see your videos, but they don't get to see a lot of this part, right? Right. And I know you talked about recently in your video, going, doing your lives again, and we all want that. Because whether we say it or not, I'm walking around with my earpiece during the day, listening to Chris, if I'm working or watching, if I'm just sitting, that's how we learn, to be honest. Yeah, and I haven't done a live stream since November. So it's just been, and things, again, life gets in the way of all this stuff. It just gets so crazy, and you know, you get live streams. If I'm building something, I'll do like three in a row, and that just takes so much time. Yeah. And yeah, I hope to get back to, you know, like I said before in that video, kind of back to square one, you know, like with the stuff that I wanted to do at one time, instead of making money on YouTube, it's completely out the window. So might as well enjoy it. Have fun and do what you want, right? That's right. I do have to say something. If we do this, I'm going to have to lose some weight. So I better start now. Shannon, do you want to go as Geary? You're going to go as Geary. That's what you want me to do, of all the things that I have, that I've actually 3D printed, and that's what I'm going to do. You could make the outfit, though. You actually could do it. I have a list of things that I'm making. Shannon could show up in Iron Man. No, no, no, no, no, no, not anytime soon. Hold on. I hurt this weekend. What is the, what's wrong with Geary showing up as Geary? Well, then you just have to be a little computer on Shannon's back. It's like Muda. Yeah, yeah. There we go. You know what's funny? How about, how about the bungee? The Geary bunny. It's the first time I've seen this. No way. Tom Lama, 3D printing Lama, put this together for us. Anybody out there who wants to print it, you know what I'll do? I'm going to shoot this right here. I love this. Chris, one of the... I just thought I saw this. This is amazing. Tom has been chatting us for a couple of weeks about this and posted it earlier. Good thing. Good thing you saw the tweet. It was literally like 10 minutes before we went live and I was like... Chris, one of the things that is amazing about this community, because I got to say, this community is everything about what we do, right? This community is so, so amazing. And one of the cool things is you could say something today. And by the time you're done with your stream or maybe like an hour later, someone has made a print of it and tags you. And Lama is really good at that. He actually has been working on this for a while. But I mean, I'm sure you've seen that on your stuff too. All of a sudden they're like, oh yeah, here you go. There you go. Now you can print it. One of my favorite... Tom Lama has sent me a lot of stuff over the years, but one of my favorite was just like that. There was a fly down here and I whipped up a fly so I snagged it. It was during a live stream and I killed him. And like a week later, there is a fly swatter in my mailbox that is shaped as my face and the handle is a ponytail. Oh man. It was the craziest thing I've ever seen. So good. So good. The pooch rock yet. The pooch rock was another one. When pooch left the show, Chuck like made a rock and he's like pooch, I'm sorry to see you left, but I found a replacement and he drew like eyes and nose on a rock and he like sets it on his desk and we played the video for him because he was leaving. So then like within a day or less, someone already made a pooch rock and I actually have one printed. I just don't have it here with me. Shannon, did you see this comment? Oh, which one? Make it happen. Oh man. Using those proximity LEDs. That's big brain energy right there. I have to like, yeah, I have to redo all the LEDs and I'm like staring it down because it's in the corner right now in a pile. Guys, I don't ask me whenever I haven't just gotten into it because like I have like the back of my knees are like completely like bruised up. Oh yeah. You did a conno weekend, right? Yeah. So ask me when I'm not tired and maybe I'll say yes. So Shannon, she printed an Ironman. She's awful. If you saw Philadelphia Ironman, right? That's Shannon. That's Philly. Pittsburgh, bro. Pittsburgh. What did I say? Philadelphia? I was wondering why it was much harder to say than normal. Anyways, if you've seen Pittsburgh Ironman or she made a sweet rescue full like working everything. I did and I'm obsessed with some of these pictures that came out of it too. I'm just saying. But guys, it's a lot. I mean, you guys 3D print things. Everybody knows like how heavy it can be. And if you saw my back plate, which a couple people saw this weekend, it's just it adds so much weight to it with all the electronics and stuff. So I'm very tired right now. Everything hurts. But so worth it. That sounds awesome. Yeah. Yeah. Geary, just because we have to show Chris once. Can you pull up or Shannon, you can pull up a rescue picture, right? I don't know why I'm asking Geary when you're sitting right in front of me. What, you know what? While you're doing that, we just looked at the time. We should probably hit some hot makes. Let's check out some cool stuff from the community. Ladies and gentlemen, here's some hot makes for you. Whoa. So I just, I just got another notification. I wanted to say, okay, I was just, I lied. It was David Wilson. Thank you again, David. All right. Chris Travis, you're our first one for the night. Millennium Falcon by Fab 365. This thing is awesome. Nice work on that one, Chris. That is clean. I was going to say, that's a clean print of details. It's pretty awesome. Very nice. I think I saw posts on Reddit recently of that stand, that like posable stand for that Falcon. This one? Yeah. Yeah. It's like, it's, you can, when you plug it together, you can like adjust it so that you can display it in different angles and stuff. That's cool. I'll have to check that out. Cause I, I want to do a cool project like this, but I've always been like intimidated and, and I don't finish projects. It's kind of like, if you guys ever remember Walter, Chris does very well. It's like a stargate. I would just sit there in a million pieces. Is what I'm trying to say. I love it. Let's see. What do you got? Oh, Instagram. You can pull it up and share it. If you want. I'm not logged in on the same computer. It's going to take you a couple of years. Cause it's my bad. I got it. Yeah. While we're waiting for it. It's my bad. This is my bad. Do it at the end. Go for everybody else's stuff first. All right. Here we go. That's more. Speaking of, speaking of Tom Lama, he posted this for us. This is amazing. How do you say this word, by the way? Zootrope. Ziotrope. Ziotrope. All right. Here we go. We got, we got to see this. Yeah. What? Yeah. I could stare at that all day. It spins at the exact speed that it needs to match the camera. The frame rate to basically make live stop motion. Yeah. Kind of like, um, Oh man. A pyro design is doing with all the spinners. Travis. Yeah. It's like, Oh, Oh, Oh, Oh, Oh, Oh, I saw, I, I saw one of those spinners on TV the other day. Oh really? Yeah. Nice. That's awesome. The amount of people that tell him that's fake is unbelievable. They don't understand. You have to, you have to see it with a camera. You don't, you can't see it any other way. But no, this is so cool. Gavin. Shapir. I don't know who you are. I'm going to follow you. But Gavin. Zoetrope zoetrope. All right zoetrope. Thank you, Andrew. See we have the council of Andrews for a reason Because they're smart I sent him the LEDs and the smoke machine for that and he still hasn't finished it. Oh, he's talking about he's talking about Walter. I Was like, what is he this? That's awesome. All right. What do we got next here? Loyal Moses. I don't know if I should tag hot makes or not Of course, you should always tag when in doubt tag hot makes hashtag hot makes This is classic. Loyal Moses pose here And I got to say those buckets are amazing the helmets that he's printed are sick So and of course this was for Barnacle so you couldn't pose any other way Have you I don't know if you follow much of of his stuff But have you seen many of his he calls a bucket studies printing those those helmets now? I really I haven't followed him much There I mean you can kind of see him in the background here Um, I'll just see something You can kind of see him in the background here And uh, they are some of them are pretty dang awesome so Definitely worth a check out nice work on that one. Loyal Moses very cool What do we got next another loyal Moses? Oh this because he printed this model by fixum dude Uh, he is here with us right now fixum dude. Um, this is a pretty awesome model. I need to get this and print it There you go And it's actually a little like card Nice those things are so awesome and he has so many of those that are cool He definitely does I what I love it takes me back to like the old school model days when I was a kid You're like picking all those things off and I'm like you know My dad letting me have a little hobby knife and I'm like scraping off the tabs and sniffing the glue No That's why nothing ever got glued together My fingers but that's a different story. Um But no, this is super cool. I love this design and and if you haven't checked it out yet Check it out because this is a cool design I believe correct me if I'm wrong fixum dude. That is a loyal moses patreon thing though right now Or or can you get them on fixum dude? We're gonna find out right now fixumdude.com Whoop, there's printables Not Not Prusa anymore, right? We're gonna have to find them What was that? I saw things on there too. Oh nice So a nice job fixum dude What do we got next here nicks Uh, I finished the samurai 300 hours all eva foam and laces a lot of laces Uh, so we're gonna pop this thing open into a Closer look look at this Evia foam a lot of eva foam. That is incredible Yeah, I mean it looks amazing um man Here let's there we go. There's a side of the helmet here You know, I didn't until I zoomed in on it. I didn't realize how many laces are in this And foam is like so obnoxious to work with too So that's that's a lot of skill. Yeah, that is incredible. Yeah Very cool very cool stuff on this one. Um, I love the the little details in the paint here um The little little rings that she put so good Uh, I'm not entirely sure but the profile picture looks familiar. I think they might be in the chat Oh nice earlier maybe Oh, well welcome if you're here, uh, we're we're definitely digging the samurai Next This is from uh, mitch if we translate this this says gongan color mixture uh I'm gonna go with it, but I'm not sure how they're doing it christ. Do you have an idea? I mean could this just be a mixing uh I don't know I mean it's sitting on a printer. Let's see look at that. Yeah There's a skirt I don't know. I I mean it's either multicolor and some sick multicolor with all this like all the different mixing here right or It's a lot of might be That might be one of those filaments that are um A rainbow No, I forget what it's called. That's too clean. We got some I got some samples a couple murphs ago on this like These companies that will they'll take three different colors of filament and they'll kind of like re extrude it I still have I still have some of that from jim. Um, that I think that Company, I think they don't exist anymore, but it might be something like that and it's just the way it's printing Is maybe different colors I mean that's a lot of colors. Yeah, just because it like it's pink on top blue on the next yellow I mean it's just so Yeah, philip blend. Thank you. Um, I do have some rolls of that left. I need to get that back out That's not philip blend. No, I don't think it is either. I think because that it's just too clean I I need this is breaking my brain. I need to know how this is Video idea chris video idea find this person if anyone could figure this out. It's you. I know it Um You know, it does it really does Yeah, it Let's see. It looks like major nozzle and co extrusion. That's also a transition Um, it very well, that's you guys are making a lot of assumptions. I'm not going to go that far into it It could be like a um a two or three blend like a nozzle that pushes and blends But if you think I like the layers are so clean, but what I don't get is that the the black Between all the colors too You know what I mean? If it was just like pink blue yellow, whatever that would be one thing But there's like man, this it's blowing me up Uh 1.6 and I'm pooping it above the print. Maybe um Almost looks like too Hotness extruding at once. Maybe Or hot ends. Oh, I was like what? Thanks, Tom Um Nice. Well, I I don't know what you're doing here, but it's magic and it looks awesome. Nice. Nice work, Mitch. Um Andrew Rogers Council of Andrews stress tested the slice engineering copperhead install On the cr10 s pro v2 By printing this black raspberry petg from green gate. Um, by the way, I haven't seen it yet. Andrew Andrew I believe sent this to me I went today. I looked it was not there yet So But that is going to be that's going to be pretty dang awesome piece there Yes, that looks good. Nice and clean It is very good I love the color too. I if you have ever seen that black raspberry from from uh green gate in person It is so cool. It's so nice. I don't think I've seen it before so now I'm very interested You can't it like seriously you it does not show on camera What it really looks like like as many times you can take a picture of it. It looks just awesome in person How many filaments you got behind you? Oh in the other room Don't you have your filament in your other room? I've got like racks of it everywhere. Oh, okay. Yeah, I don't even know Hundreds hundreds and hundreds of spools so real quick I have A little bit. I don't fully understand it But I do have a little bit more information on that that bowl that was had the multicolors Okay Um, I went to the students website apparently and they call this technique till death like the like little wavy character on your keyboard Okay, which makes sense because that's kind of what it looks like. Uh, but it says the They're using like a color it's colored with resin dyes So you can do gradations and subtle color adjustments by hand Whoa The filaments of different colors are joined together in advance and colored depending on the model Positions of the filaments are calculated Ahead of time that's cool. Can you Gary can you post that in the in the chat so everybody has that link because we uh need to look at that All right. Oh man, we're getting short on time here. All right. Let's go. Hey, are you good for a couple extra minutes, chris Yeah, I'm good. Okay. I I just I know we're I just realized what time was and we're almost Uh, the other you know, andrew rogers again should this be considered or so we would this be considered a hot makes Uh, absolutely. I call this the destination checkmate pieces are inspired by Uh, chelsea. Is it bone stels? I'm gonna go with that. I'm terrible with names, by the way Uh space art from the 50s and 60s the board printed in pla pieces are Printed in resin. I'm talking too fast. Um, this is awesome. By the way I feel like so many people have been doing like chest sets recently Not that we've shown necessarily, but I've just seen a lot pop up I agree and and they're all awesome and I love that you printed your own board And I love the do you do much resin chris? I don't you don't Um, I I love how clean these look Yeah, they look so good Yeah, from it first look the those that so the silver pieces look like metal and they're real clean Very much It does have like a metallic kind of I wonder if these are painted. Um, andrew, let let us know if these are painted If not, I need to know what resin this is because that is awesome Uh, but nice work andrew the real sam printis. What's going on jimmy says, um and and here you go This is this is a mini jim by wexter Uh, you know, you made it chris when wet when wexter makes a mini jim of you or a mini of you, right? um He didn't post it to his crowd, but he made it It's out there on things if you just type in mini jim. You'll find it also, um, there's some fun variations that the community has done Uh, oh, you know what can you kill the sound up? Thank you. Um, I did it coming through your mic Oh, hang on. Let me fix that Yeah, um, we we did this with a tick tock. I don't know a month ago and we I got struck Uh, well warned because the tick tock had music in it So basically he he's been taunting me printing these gears Um, he prints a ton of droids, um and bots and all sort of stuff He has art use and movies and all sorts of stuff like that, but um So he's been like, you know, just having some fun with the with the mini jim And he had the mini joel in one of them too. He was going back and forth Uh, but he posted this one of the spinning The spinning gear, so I had to show that from my friend sam. Sam will actually be out here for mirf. Um, He's coming out, which will be super cool Sam, yeah Oh, cool. Yeah, sam prentice is coming out. Um, I think he's I think he's connecting with tripod If I remember right and then uh, they're gonna be at mirf. Yeah It's gonna be pretty dang awesome, uh neck 3d designs We all know and you know carl carl's awesome with his belt printers I did get another notification here. I just want to make sure I didn't uh I didn't miss somebody All right, I'll double check them again at the end here He has been messing around with an extruder and this is pretty dang cool This is a resin printed one piece cooling fan duct 40 mil and a 40 mil hot end fan shroud for the cr 30 And it looks pretty dang cool You've been playing around with that What is it called that that twist extruder? I can't remember what he called it. Oh, yeah They've got an orbiter for that now. That's right an orbiter. Yeah But that's pretty cool. Um, I'm just curious how How temperature-wise this will hold up, you know Yeah, I don't know. It's a really cool looking design. Yeah Carl's always having fun with the belt printers and uh All right, what we got next tripod speaking of tripod. Um Printed this on the prusa mini that he won from oil moses And this is also a big tree. What does he say? Oh polymaker silk purple um But that is a clean printer tripod Stock stock settings. I think he said two nothing done to it On his prusa mini. You're a prusa fan, right chris. Oh, yeah You have you do you have a mini I do nice I remember when they announced it at an IRF in 2019 And then people are like is that an end or two? Uh, no It did look at that time, you know, it kind of resembled an ender pee And you're precious though But this this print is really clean man. Nice nice work. Um tripod. Do you do a lot of practical stuff still? Yeah, most you know all the printing I do mostly now is uh stuff for videos You know and I do a lot of practical stuff, you know for stuff around the house still I agree. Uh, most of the stuff I do is my test prints for videos I don't print for myself like almost ever now Um, which I should we have some fun projects coming though. So Stay tuned for that. All right. Hey, are you doing a spool racer this year? You're driving up I thought about it man. I thought about it. I don't know. Do you have a do you have a belt? Do you have a c a 30? I don't um We could probably somebody make a spool racer that's like it's like a tank, but it's using the belt the cr 30s for the treads Using the cr 30 for the treads. Yeah I was gonna say Ivan randa made a pretty awesome tank. Um, all 3d printed, but uh, you I'm thinking about bringing one too We we got to like we got to take out pooch and chep And I'm thinking about um spoiler spoiler alert. I'm thinking about printing it on the on the cr 30 Like actually printing the whole thing. I the only problem is I don't think nylon would hold me up. So After the pushing incident, I don't The great pushing incident Man, we have replayed that so much on this so many times And and sometimes we'll uh, we'll just I would randomly have uh, chuck to show up on the channel And just start poking pooch, you know back in the day. Uh, what do we got neil 3d prints? This is awesome. Did a collab with prusa 3d and turned a prusa mini into a working prusa mate Um, I'm gonna pop this open. This is straight from um, there we go. This is introducing The mini-mon there you go. Look at that. I like this guy I like the cut of his jib Yep It's so cool looking and he goes through like, you know, how he did everything and um, such a cool It's such a cool project, but it So here's the question with your with your wobbly printer with the two feet here With the two feet here like four feet Oh, it might it might have four feet. You're right. It might have four feet. Um, would that make it, you know Would that make it wobble? Probably not Um, we need a tripod version Let's make you like want to want to watch peewee's playhouse or something It's really ingenious. I love this thing Uh, absolutely. The design is awesome. What I need to see chris Can you do this as a video and put it on roller skates? And then test the the printing that way Just let it skate around the floor Come on. Why not? That would be so funny If you want to see that in the chat 130 people right now If you want to see chris put his pusha mini on roller skates Let us know in the chat. We need to know We need to know how many people will watch this at least 100 We need an open rc 3d printer. That's not now. There's an idea. Yes I that is a cool idea. Um who Oh, I don't I can't I can't say it out loud. So good thing. I stopped myself. I just realized I almost just said something I can't say Uh, we'll say this there's something cool coming. Uh, I can't say what it is. Um, it's a secret right now I think but anyways, uh roller skates david wilson. There you go. He's in Um All right, what else do we got two more here sage? I designed this 3d print It uh, it can count without electronics each day represents a a value double in uh, double the last So from left to right one two four eight, etc Uh for bonus point and immature immortality. What? Would this number be 101 if someone else knows that let me know. Um, that's too much brain power for me right now, but check this out You can turn on the sound on this one music to my ears It's just just spinning When you ask me questions on the spot, I don't know how to answer. This is what's going on in my brain Oh There you go now he's showing you what what it counts That's pretty cool It's really cool. It makes me think too much, but it's pretty dang awesome. Uh, nice work sage. Oops um And last but not least Uh, let's see. Have you seen this yet chris? He says I I just discovered the artwork of neil mendosa. He's creating animated sculptures with a deep maker approach Uh and lots of and lots of humorous Not the funny bone by the way, um Check this out. This is so uh Watch the audio on this one. I'm not sure. I can't remember what it is. So hang on You're good. You can unmute it. There's no audio. I mean there's no Music check this So good, I feel like we need music on that and like it would change it completely It's so good It's so good nice, so Uh Did that say Hey, shannon, we're gonna need you to go here. No, we need to see this live live on location road trip Oh, yeah, no breaks Like you know the last time I've been to the children's museum This is a re I would go if this was near me just to play with that. Absolutely Do you know it's not like that when you go though you go and then there's lines of like 50 people and then Children everywhere I act like a kid anyway Um Awesome, well, I know we're we're like 11 minutes over. I apologize Chris. I apologize everybody else But I tell you what we had a lot of fun But before we go because we got to get going Um, can you let everybody know one more time? Like who are you? What do you where can we find you? And while you're doing that I'm going to look up the donations All right. Yeah, uh, so I am chris reilly. I'm on youtube I've been on here for a couple of years and it's all 3d printing related So, uh, I mean my my main focus is to pretty much help others get into 3d printing and What when I learn things 3d printing I try to share it with you all and that's that's what all the videos have been about And hopefully we'll uh keep making videos for the foreseeable future But you can find me on youtube and on twitter and all the good stuff. It's pretty much chris reilly everywhere. So Yeah, definitely Jump out and and support chris and and the mission because he makes some amazing stuff If you've not checked out chris's channel Link's are in the description below and you have to if you if you want a deep dive on anything So I have a palette 3 pro that I purchased like I pre-ordered myself And I need like you to come make the like four How many did you do for the last one like three videos on it? Uh, like to get it going We're gonna need that because I need to figure this out Uh, I might just do a live stream and like try to get it set up or something Um, but but check out chris reilly everywhere again links in the description Uh chris. Thanks man. I really appreciate your comment. Um It's been awesome. It was great to have fun and laugh with you. Yeah. Yeah, thanks for having me on I I do apologize. It's been so long trying to try to get on the show with you all but I had a great It's okay. Everybody's busy and monday's are rough. So Yeah, um, she added anything else before we go Um, I don't have any solidified information yet I know I will be streaming tomorrow night and on saturday because tuesday saturdays are my schedule And sarah and I are going to be doing a giveaway of filament at some point this week. I don't know what today So you're gonna have to like stop by and just find out but Um, that's a fun thing that we're gonna start this week. So yeah, and I think we're actually I think i'm talking to chris Right now a lightsaber chris that you guys are all like Fascinated with and he wants to start popping on my streams just to chill and talk with you guys. So That's something that's uh In the work too here. I know that I like that you're like lightsaber chris, you know I mean, there's so many like everybody has there's too many chris's in the 3d printing Sinister props chris. How about that? Yes. Um, hey everybody else Thank you so much. Don't forget next week 100th episode come grab some prizes Or or try to win some prizes. I promise to only be a few quizzes Uh, we're gonna have a lot of fun giri. What were you gonna say? I was just gonna say maybe maybe uh, we can have a big like avengers and game Like battle between all the chrisses and all the andrews That's like anchor man. We're going back. No, I was just gonna say to me That would be like anchor man when they all meet in the alley and like like like Somebody with a trident Like somebody's wallet falls out and flips open and you find out his name is andrew and he was a plant Oh, man, all right chris hang out. We'll be right back with you everybody else Thank you so much for being with us for another monday right here on hot makes Uh, show us your stuff. We hashtag hot makes on the twitters And uh, we will find you otherwise. We'll see you next week for 100 episodes And some giveaways Oh, and a special guest forget about the special guest. It's a secret. So I wasn't gonna mention it. Uh, All right, everybody have a great night. Have a great monday