 Mm-hmm This is for right now. What's up you guys? We are live as you guys observed a yesterday We did these TV trays For Jeff Sun's birthday is what he wanted and so that is what he's getting Today we are going to make them more durable by adding UTC and if you don't know what UTC is It is a poly as far as Coating That makes Whatever it's on more durable, so it's gonna be more scratch resistant even than before and you don't have to give Be careful standing because of the silver you don't have to give it the Suggested 30 day cure time you can actually fully use these in two days after applying the UTC you just have to wait 24 hours from when you Do the color coat wait 24 hours, and then you sand with 220 I Thought you had sanded them and so while he is Prepping that piece. I'll show you the PC 30 prepped This is the board That we poured yesterday and you can see on it the scratches from sanding it trust me you won't be able to see them First time I had to sand a resin piece It's scared me to death because you you could see the scratches and so it's scary. Okay. It's just scary So you're gonna need that you're gonna need some UTC for these we are using The top coat and Matt this out it says gloss but I'm pretty sure that it's the exact same Thing in I think this is just an old bottle. So now if you get the gloss or the matte This one will just say ultimate hybrid coating if you got the gloss one It will say gloss really big on it I could not find that word for the longest time. I felt like such a dumb dumb anyway, it's the part B in that is The same in both kits so So you're gonna need the UTC You're gonna need some rollers and we already have these Okay, it does look like a large feminine product but It's not it is Be safe driving bruise it is actually our rollers that I Taped up and the reason I did this is because I'm opening it backwards Because you want to get all the lint off of your rollers. These are nine inch Quarter nap rollers and the nap just means the Height of the fuzz that's on the roller and You wrap them to get any Loose fuzzies off because it's really hard to pick things out of Once you have have it down You can you can pick things out, but it's just easier to go ahead and D-lint Your rollers before you even get Started prep is key all of these fuzzies right here would have probably been left behind In our surface. I even go a little bit further and like side Pull these I haven't tried it with a velour roller, I don't even know they made those I know that It's being tested with a foam roller right now. You just want to If you use something like a foam roller You can do it. You just have to basically work a lot of the product off on a side piece before a Side piece that's fine But what she was saying it's the velours low shed like these Just be advised if if it is prone to shedding You really need to Get as much of the loose fuzzies off as possible 100% with UTC prep is key in Not making you pull your hair out and stress about it because it's a little bit of a stressful Product to work with and try to have a dust-free zone. So this is a very short working time You've got 15-20 minutes To work with these and you need to have everything ready to go before you even mix your UTC I'm gonna move all these aside because I don't need them anymore. Yeah. Yeah, just just scuff sanding everything So we got our rollers You really need a hand cut you need a lot of rollers. You need a roller rolling pins and Have all of them prepped before you get started so have all the rollers put on to make sure that they spin As much if not more work then cutting a stencil Because like if you think about it, you have to do all this prep for this and then when you're ready It just takes seconds to apply and then you're done. It's like a stencil you spray it and you're done Here's your this So now that Jeff has this piece sanded. He's wiping it off with 91% isopropyl alcohol He's using 91% because it evaporates faster the higher percent you're working with and you want to have nothing on your surface when you get started with the UTC now There are a few different way it looks like you just made the design do this Because you like did that So there are a lot of different formulas Ronda at RK3 has a PDF on her website That has the exact formula for whether using gloss or matte I'm gonna tell you my e-science way of doing this that's worked for us and Here it is so It is two to one part a to part B Equal quantities Two parts a one part B and then one part water So what I do because numbers are not my friend. They actually hate me most of the time I just put out what it is So if it's two to one then I have two of this and one of this and if it's also one part water Then I just do one of this so everything's equal measured and all I gotta do is put it in a cup together Because working time is really really light Super short So I'm gonna go ahead and put my part a both part a's in this cup Because I need a bigger cup for the amount of liquid we're about to work with the both part a's In fact, this may not even be big enough I'm trying not to scrape the sides of these Dixie cups too much because they are wax lined And you don't want that wax to end up in your Medium and then one part B Now you want to mix this Together completely before you start adding the water, so I'm gonna give this a couple minute mix So it doesn't take much to get this small quantity mixed together just a minute will do Typically you'd want to mix this add the water mix it up and then pour it out into a rolling hand This is gonna be way too much for these size pieces. I wasn't sure if you wanted to do a It doesn't take a lot of this product So this is the consistency it's like Mod Podge or like school glue It's a really thick and if you roll it on this thick It's gonna leave kind of a cloudy hue to it. So you have to add the water. We're gonna add the water Half now and then mix that in and then we're gonna mix in the other half. They don't have a reason why that is I just know that That's what I was told and that's what's been working for us And that's essentially what we teach on this channel is what we do that works for us Tim you got your order today. That's awesome See is this You're good with this liquidity. I have a little bit of water leftover You want it to be This kind of liquidity. I don't know what to compare it to but it's it doesn't drip It it full flows when you first pour it off of your stir stick now Jeff is going to wet roll and dry roll or Okay, Jeff's gonna be wet rolling Okay, he is right some of it is gonna get soaked up into the roller But that's fine if you put too much product down then you're going to have more product to soak up with your dry roller once your Dry roller you have about 15 minutes working time See how cloudy this is right now if we had to mix the water in it would look like this And then stay like this and that is not a good look But since you mix the water in it will As it dries as it evaporates it'll lighten up. I'm gonna get you guys in closer so you can see this rolling process Guess I need the mic so these are called lap lines and Lap lines are from your roller All right Well, you're gonna need if you're gonna do your other one so What Jeff is about to do is put pressure on this side of the roller the roller side with the handle and kind of Lighten up on the opposite side and That's gonna give a tapered feathered look Right now. He is trying to roll out any of the lap lines And This is gonna pull some of the texture off as well. What we're doing right now is pulling product off of the board Me, you know, you may need to wet roll that again in the opposite direction to get rid of some of those so he's pulling product off of the board by Rolling with the dry roller and once your dry roller gets saturated. It's gonna leave kind of a tacking sound and And at that point you need to switch out your roller For a new one and yeah, it's gonna say you can see that well so when you do this you want to Make sure I'm always Pushing down on this side Like I'm not pushing on this. I just do this and now I like almost lean the finger over So this side is getting more and this side is not getting so much of the I Think you need to roll in the opposite direction because you got we have a hair right here So, I don't know if you guys heard what he was saying, but he's putting pressure on the handle side and not the opposite side If you run into a situation where you need more time To work on the piece Yeah, if you run into a situation where you can still see some of the lap lines just slightly Then you it's time to get a new dry roller. It's not picking up the product It's just moving product from one area to another Luckily we prepped plenty of rollers Also, if you run into a situation where you need more time you can use an atomizer Which is here rewrap roll it and then we'll pull it off Again Either way, but you're running into times situation Here, I don't know if you guys can hear that tack sound But that can indicate that your time is running But if you need to extend your time like I was saying a second ago, you can use an atomizer Which is a sprayer? I'm trying to see if I can see the one that we have It's a sprayer. That's not a squirt bottle because it mists water instead of like squirt bottles it and An atomizer will just You have a something right there If you see something in your surface get it off as quickly as possible and then you have to Redry roll it Sometimes you have to rewrap roll it. I think your issue is you're getting too close to your original line But that looks good That looks good So with UTC there is a slight texture but It's not so bad that It's not so bad That you wouldn't want to use UTC Well, if you're gonna do something about it, you have to decide quickly because we're already down to like four minutes left Yeah, it'll go on That stuff is that being that Yeah, just pour it on there. This is UTC map Let me see if I can find the atomizer Up there it is This is an atomizer as you can see It just mists Is that that's not the dry roller is it? Okay? If like I was saying if you run into a situation where you need more time Atomize it also be I think you're getting lines on this one because you're not overlapping Just go the opposite way Also, if there's any texture in your roller that will show up on Your dry roll Jeff just put on another roller. So this one isn't saturated with product Hold on So because we're having issues with this one. I'm just going to mist over Just a little bit with Will you just I think you need to roll one more time because I've I misted it. I Thought you're gonna go again So misting it with water will extend your time out just a little bit We notice that you have a line that you can't get rid of then just roll in the opposite direction and Also, it's good to roll in opposite direction some as well because that will prevent spots being missed because we've done these before where Somehow a spot is missed. It looks good somehow a spot is missed and So it it's all matte except for if you look at it a certain way it'll look glossy It's totally weird. Anyways, this one's already starting to clear up the UTC is drying out And so it's already looking Matt and awesome. You can see that the texture is laying down a bit Don't put it your finger in it and get tweezers. So you still see some of the texture, but honestly the trade-out of the durability is Totally worth it. I don't carry UTC But you can get it from RK3 or you can get it directly from stonecoat countertops.com This is the website right here And what we use today was ultimate topcoat in the natural neutral or the matte. It's actually called natural But it gives a matte finish The gloss comes out as kind of satiny Not a not a gloss. It's more of a satin Now we're gonna take these to the dust-free zone because for the next two hours We need to make sure nothing lands in it. That would be a great screenshot right there For the next two hours, you need to make sure nothing lands in it And then by eight hours, it will be touchable and in two days. It'll be full use. You don't have to worry about Setting things on it and it leaving rings. It's fully durable now Well, we'll be in two days It's totally worth it. We now recommend whenever we do tables TV trays anything functional we always recommend putting UTC on because It's just gonna give you more longevity to your resin countertops, but we agree don't you my big boy? So you guys I Hope you enjoyed this a little bit of UTC tutorials is And that you learned something. I hope it was beneficial for you. It's always beneficial for us What's up, Sue we're pricing out your shipment as we speak vamp scottan on to me and it'll get out to you Super shortly. It will probably come in a couple different boxes though But we love the matte UTC. Which one do you guys think you would like better? The gloss or satin or the matte I Like the matte best If you've seen it, then what do you think it can be put over any resin? it actually is A formula that Stone Coat tweaked for this process But originally it was to keep graffiti artists from spray painting on walls So you could write on it with a sharpie and then wash it off Fun fact I tried to do a lip piece on this matte UTC and I did the teeth you can see some residue of white paint right there and I masked it off to do the black and when I pulled the masking off it pulled all of the black paint off so I can fully attest to the fact that Paint doesn't want to stick to it unless you scuff it and seal it so don't forget you guys tomorrow we are going to be doing our fall sale and Hope you guys come to it because we really need to sell some artwork Clear out some space because we have a lot of new inventory coming in a lot of new products So we want to test and show off for you guys But I need the room to do it. So but we said please come to our show Please come to our show. Please please please and We will also be having doorbusters, which is a grab bag or a not so mystery box We'll show you guys what's in it. It's a value to double what we're selling it at and it's First call it guess it anyways, hope you guys have an awesome day We got to go but you guys are amazing Falcon to you and Yeah, I hope to see you guys here tomorrow 6 p.m. for the sale of Custom original one of a kind artwork from ATD as well as vamp will have a few pieces They're amazing. I've already seen him. And so yeah, don't make Bowie sad. He'll end up with a stutter if you don't show up and Stuttle what is it in the big daddy when he was like, please help me find my mom or whatever. I don't know can't remember anyways Beautiful cute adorable movie Super funny anyways anyways anyways, I hope you guys have an awesome day We'll see you guys tomorrow till then be kind of one another cuz you never know what someone's going through So you don't have to Yeah, you guys are amazing. We'll see you guys tomorrow. Bye