 Welcome to Helix, the first professional wireless security system that can be easily installed any place in the home. This is chapter one of the Helix instructional series outlining the steps required to install the Helix panel. Everything you need to install the Helix security system comes standard in the box. This includes the desktop mounting stand, the UL compliant security system, a power supply, an Ethernet cable enabling communications, and an instruction manual. For a period of time we're also including a NanoMax door window sensor as well. Please review the manual for additional details on configuring your system. While it's possible to install the Helix on a wall, the recommended installation would use the desktop bracket. You simply insert the Helix panel into the base until it rests securely on the bottom. There's an alignment notch on the backside to ensure proper placement in the base. Adding communications uses the Ethernet cable provided. Plug one end of the cable into the slot on the backside of Helix and the other end into an open port on the home's router. Apply power by plugging the barrel connector into the slot just under the Ethernet cable and the power supply into an unswitched outlet in the home. You can secure that using the outlet cover screw as noted. The Helix system will emit a long beep and the LEDs will begin to light up. The top five LEDs should turn green with the top one blinking indicating AC power. It may take up to 30 seconds for the communication LEDs to come solid green. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract alarm monitoring services.