 What's happening YouTube? Thanks for tuning into another channel right here with the rust belt mechanic. So Right here. I've got my service cart and I absolutely love this one the model on this one I'm gonna have a look is KRSC 33 APRK, which is a flat black flip-lid style Cart here and I've added a couple little accessories to it and I like having this one to be able to roll around the Whole shop. Yes, I do have my nice big toolbox behind me But can't always roll it around But one of the things that I like to carry with me all the time is a funnel now what happens with this funnel either a It disappears, you know those five finger discount little sons of guns So they just take it all over the shop detail guys grab it use it and something and never bring it back So I like to have spares here and there But I don't like to have that all the time the other thing that kind of sucks about it Is if I put it my holster down here on the side It just ends up dripping little bits of oil and stuff around you know when I get done using it or Drip stuff on the side of my cart, which that sucks too, and I hate having to clean my cart off So what kind of solution do I have this one? I picked up this week off the matcode truck actually is a funnel buddy part number on this one is 50-1 and as you can see it comes in the wrong color So I think that we would be able to make a really sweet project out of this one today So I'm going to show you what I'm going to do with this and I'm going to do some custom paint to it And we're going to attach it to the cart right here make it look like it's supposed to go on to a snap-on cart So stay tuned So here on the side of my cart you can see that I've got the three little station Storage thing where I usually am able to keep some of my impacts that I have throughout the day I usually keep a spray bottle hanging there and like I said my funnel some of the times when I'm using it Just kind of sits there, or I'll throw it down underneath But again that just kind of makes a mess and then on the other side I just got the standard handle That comes with the cart right here and then we've got the slots and dots and I was you know kind of thinking on You know possibly using that for a hammer rack or something along those lines, and then let's have a look on the inside on the inside We've got the pry bars if you pull up the little thing on the side here It does have the holes that go all the way through to be able to put whatever pry bars you want in either side Keep rags and a couple of extra bits of hardware here on the other side as well That makes it you know a nice all-around little thing to be able to have what I need when I need it So my idea now yes It is kind of blasphemy on wanting to put a matco tool onto a Snap-on cart, but you know what? I think matco they rebrand things so often that We can make that work for us. What do you guys think so the plan is to? de-sticker the matco stuff off of this one we can do that one really easy and Then we'll scuff it all up and then we've got some flat black paint that we're going to get to match The mounting holes on it you can see they've got it right here and here We're going to be doing a little bit of adjusting so we can get it to work with our slots and dots And we're going to see if we can't get this funnel buddy to look like it is a snap-on accessory for snap-on tool cart So let's get the de-stickering and starting to scuff it up for paint And as we can see to get these off the little funnel insert part just kind of pulled out right there And then this lower part has two little tabs here and here You just use a pair of pliers to pinch and it comes back on up through so that's getting all the hardware out So now all we have to do is get the set of crap I mean matco stickers off here so we can do some scuffing and get ready for paint but Sticker on my sticker lift All right, so I don't use my cart or my toolbox for sticker bombs, but I use my lift So where else do you guys keep sticker bombs in the comments below? I want you to leave some comments of where you guys leave sticker bombs So this is my one rack. So we're gonna fill that one up here real soon. I'm sure What would we be using if we didn't use snap-on tools for the prep service get the prepping Now the other thing before we start painting is we want to make sure that the Holes right here match up to our slots and dots on the side of the cart. So they're pretty close But we're gonna have to drill one extra little hole One hole is gonna have to come in about a quarter of an inch in on the one side And once we do that it'll line up pretty much perfectly We'll be able to put some screws and washers in after we get it all painted But we want to make that hole get that drilled before we start doing any painting There we are as we can see now we've got our hole drilled in just a little bit So we're gonna clean this back up off and it's all nice and smooth So it's not gonna scratch up our box at the same time too. So for the paint wise what I decided to go with was some Rust-Oleum acrylic and animal Flat black and see what we got and what we're working with Primer and paint all in one so we're not really gonna need to do a whole lot on this one We just want to do some nice thin even coats to get this thing all nice and coated and nice thing about worry-in-the-shot Racks are nice paint little paint booth holders hang them up Ridiculous tip already gone And we better close the door just in case we don't want paint flying everywhere complete coat number two Numbo tray. All right. Well, we've got three total coats on this thing now And I'm pretty happy with how this thing has turned out you get this close up here The flat has matched actually really nicely So we've got one more little piece that we've got to add to this just to make it You know seem a little bit more at home. We've got ourselves a nice snap on carbon fiber weave little badge that we're gonna put on The top of this so it's gonna look a little bit more official going on our snap-on cart We'll show it carefully Just like that It looks so pretty Looks oh so pretty That flat black with the black carbon fiber All right, let's get her mounted up now All right, so now I've got a couple of The fastener is left over from my slots and dots from when I put my power cabinets together So we're just gonna use those small screws that I had left over from that before All right, what do we think? Here on the front section Well right here kind of front middle Yeah, let's go with this section second section Even pretty tight pretty right guys Let's get our funnel see what she looks like here. We go now the ease of this one is you've got all that nasty stuff in your funnel Just put it on right in there All drained right into your little opening Here we are with the finished product Doesn't hang down too low Our snap on carbon fiber s to make it kind of official there and this flat black ended up matching Really really good with the flat black of the actual cart that sheen to a flat We get some light on here Yep that flat just matched Absolutely perfect. I think that turned out fantastic And it's gonna be something that's gonna stay there and nobody's gonna be messing with because it's actually attached to my cart Yeah, they might borrow it here and there But I'm not gonna be making a mess or anything traveling it all around the shop as well Well pretty easy project as you guys can see it's something you guys can do for yourself And it's gonna work with just about any other slots and dots that you guys have on any other kind of service parts or whatnot I think it'll be a nice little addition to be able to put this thing onto the cart and have it here with me Wherever I need to go if you guys haven't already make sure you hit the thumbs up button hit that little bell notification So if you guys are subscribed you guys getting notified on when I come out with cool awesome content like this If you're interested in this product, I will leave it down in the description below So you guys can get yourselves one of these as well. Hopefully you guys enjoyed this content. Thank you And as always guys, you stay awesome