Loading...

Basic Link Configuration Infinity NFT devices

2,794 views

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Nov 3, 2015

► Website: https://www.ligowave.com/
► Facebook: https://www.facebook.com/ligoptp
► Twitter: https://twitter.com/LigoWave
► Google+: https://plus.google.com/+LigoWaveWire...

NFT2N
- Dual radio 802.11N (3x3 MIMO)
- 2.4 GHz and 5 GHz frequencies
- Integrated omni-directional antennas
- 802.3 at power over Ethernet standard support. You can power device directly from a PoE switch

NFT1Ni
- Powerful 2.4 GHz 802.11N radio
- PoE passthrough
- 2x external (3 dBi) omnidirectional antennas
- Doesn't support 802.3 as Standard
- Can Power a LigoDLB Unit

IMPORTANT!
By default the Infinity NFT series devices will try to obtain an IP from a DHCP. The Infinity NFT series supports the

SSDP protocol and BONJOUR (Firmware v7.5 and up) which allow it to find devices without external tools or programs when

the units obtain IP by DHCP.
In case there is no DHCP available, the infinity unit will use the IP 192.168.66/24.

Access point configuration
1. Power the devices and connect to the management IP for the Infinity NFT unit.
2. Select your country code.
3. Change the IP of the radio.
4. Configure the name of the network to SSID and the security as "Personal WPA/WPA2" in the 2.4 GHz radio.
5. Repeat the step 4 for 5 GHz radio. You can choose a different SSID and security.
6. Save changes.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...