 Γεια σας, είναι Vicky εδώ και θέλω να σας ευχαριστώ. Τώρα, μετά έγινε για να κάνω αυτή την 1-kid 10-card βίντεο, γιατί εγώ έγινε πολύ χρήμα από το βιβλόγι, για να χρειαζόμαστε χρήμα με οικογένειες φίλες, αλλά τώρα είμαι έτσι στο σχέδιο μου, για να ξεκινήσουμε από να κάνουμε ένα κομμάτιο δημιουργία για να παρακολουθήσουμε το γένωρο card-kit. Θα φέρνεις ένα σχεδό σπίτι, σε αυτό το κουμμό. ίσως κάποιες εξογέντες, ότι είναι πολύς αφίτας της νελος, βλέπεις ένα σχέδιο σπίτι από ένα κομμάτιο δημιουργία, αυτό για να χρειαζόμαστε τα εξογέντες, και χρειαζόμαστε να το κάνετε χρήμα, για να είναι αμιλή. Και είπα να χρησιμοποιήσεις. Θα έρθουν 2 εξογέντες, ένα για λιγό και ένα για λιγό γädι. Και αυτά είναι εγκρατές για να εμπορήσουν, γιατί θα το χρειαζόμαστε χρήματος. Απίσης έχετε κάποιες παρακολουθήκες, Αυτές είναι ουθέντικοι και έχετε τρεις διαφορετικές κόρδες της καρδιάς. Οπότε επίσης θέλω να κρατήσω 10 καρδιά από τη μου κοίτα, θα πω 2 more από τη μου καρδιά μου και θα τα καρδιάζω μπροστά. Φωθούνται, όχι όπως θα τα κάνω και θα ξεκινήσουμε με την πρώτη καρδιά μου. Για την πρώτη καρδιά μου θα πω για τα όμως, θα σταμπω ένα σνωφλίκ στο καρδιάς της καρδιάς. Μπορείτε να δείτε ότι χρησιμοποιηθώ με αυτή η δύο πρώτη καρδιά που έχω δει από τη μου καρδιά. Θα σταμπω ένα σνωφλίκ. Αυτό είναι το πιο σνωφλίκ στο καρδιάς, με πολύ σαμαρκή. Και τώρα θα εμποθώ. Έχω απαθεί το βασικό εμποθήμα μου από νουβό. Και τώρα θα χρησιμοποιήσω το σνωφλίκ και το στήρας. Όπως θα χρησιμοποιηθώ με όλα τα 10 καρδιά, θα πω να πω αρκετή. Αυτό was a quite a challenge for me because I had to create 10 different cards by using snowflakes. But I made it and you are going to see that the more you create, the more ideas come. And even if you have to create 10 cards using just snowflake stamps, you will gonna make it at the end. So now I have to add the sentiment for that I decided to go with the die that I had, that die cuts winter. This is from a Simon's stamp older die set. Of course you can go ahead and stamp any of the sentiments that are included in the stamp set. I am going to stick everything down. But before I want to stamp the word happy. So I am going to place the die cut there just to decide where this is going to go. So that I can place the word happy that comes from the stamp set in the kit. And I am going to apply my VersaMarking, stamp it and then apply my embossing powder. Of course I am going to use the exact same white embossing powder as I did for the snowflake. I am using my glue pen at the back of the die cut and stick it directly on top of my card base. Once I have all my sentiments there, I am going to embellish my card just a little bit more to add some shine. So I have chosen two different snowflakes from the sequin pack in the kit. I am going to stick one down. And I have used glossy accents for that. And then I am going to stick on top the white little snowflake. So this is going to create an interesting element at the center of my snowflake. And to add more shimmer and shine on my snowflake I am going to use my Nouveau crystal drops. I am going to add some dots with the blue as well as with the white. And here is a closer look of what I am doing. I am just filling in some of those dots that are already drawn on the snowflake. And that completes the first card. Quick and simple. For the second card I am using this patterned paper and I am going to combine two different dies that I had in my stash. So the one is going to cut out a rectangle that is slightly smaller than a standard card. And on the inside I am going to cut out a window with snowflakes. So I have passed it through my die cutting machine. And you can see the frame that I end up having as well as the little window. I am going to separate all those pieces very carefully because it is very delicate. And I am going to create a shaker card out of this. So I am adding some tape adhesive at the back of my frame. I am going to cover it up at the back with this piece of acetate. And you can see that I can flip this die cut so I don't have a waist at all. And stick it on top of the acetate. You can use either side. I just decided that the white side is even better because it gives a nice contrast against the blue background. So I am using my new glue pen at the back. And then I am going to stick it directly on top of the window. And although I didn't use a stamp from the stamp set I ended up having snowflakes again on this card. You will see that at the end I will have 10 cards with snowflakes. And the funny thing is that today it's snowing outside. We are experiencing very low temperatures in Greece although that's not very common here. But it was the perfect day to create snowflake cards. Since I can see snowflakes falling outside the window. And for my window here I didn't actually use the sequin mix that was included in the kit. Instead I used some other sequins that I had in my stash. But you can of course go ahead and use what's in the kit. And since there are so many things going on on the front of the card I decided to stamp the sentiment on the inside. So I am going to use the snowmatch things on the inside and I am going to stamp it with the shimmer ink. The Delicata white shimmer ink that was included in the kit. Tap the ink pad on your stamp and stamp it one sort wise to get a nice impression. That's why I used my misty there. So my card is finished. For my third card I am going to create again a window card but this time without the secure elements. So first of all I am going to place this pattern paper on top of my cardstock. I am temporarily securing that. And then I chose three different snowflakes to place on top. Now for each of those snowflakes I tried to find different dies that match them perfectly. So I am securing the dies on top of my cardstock. Make sure that you have the flap open of the card. You don't want to cut the window all through the back of your card base. I am running it through my physics machine and I am going to end up with three little windows that are cut out at the exact same position on my cardstock as well as on my pattern paper. So now that I have both those pieces the idea is to sandwich the parchment paper in between those layers and so I am going to make a mark with my pencil where those windows are going to fall so that I can stamp the snowflakes. I am going to place my parchment paper on my misty then place the snowflakes where they fit on top and then I am going to stamp everything with my VersaMark ink pad and then I am going to apply embossing powder but instead of using white embossing powder this is vanilla and that's because my pattern paper is in vanilla colours and I don't want those snowflakes to be very vibrant. So I am using my heat gun to melt the powder and my snowflakes are ready. I now need to make sure that I erase all those pencil lines and I can sandwich that parchment paper between the other layers. I am going to use some tape adhesive at the back and you will see that once I stick that parchment paper on top it's going to look beautiful as it is but of course you can still see the tape in between so you really need to cover this up somehow and the trick is to add some pattern paper on top. I have added some foam tape at the back of this pattern paper so I get a erased effect and my card is pretty much finished all that's left to do is to add the sentiment. Now I created a little label for the sentiment out of black cardstock and you can see that I am cutting out a fishtail and one end and the sentiment says missing you I decided to go with this sentiment but you can pretty much stamp whatever you have on hand or you can go with the sentiments that are on the stamp set. I think that the black gives a nice contrast against all the background and to finish it off I am going to use some gems at the center of those snowflakes. A really beautiful card and I love how the windows are looking beautiful even from the inside. So let's move on to the next card. So for this card I have cut out a panel out of the pink pattern paper and I am going to combine it with the grey cardstock and that's one of those card bases that I have added from my stash. I think that pink with grey go perfectly together. So as you can see I am going to cut out a window only out of the pattern paper and then I am going to see where that window falls on my card base and then again I am going to stamp the snowflake and that's the biggest snowflake from the stamp set again a beautiful one. I am going to stamp it with VersaMarking and then apply some embossing powder. The embossing powder that I decided to work with was pink just because it matches perfectly the pink on the pattern paper. And I also have to say that using the misty for stamping all those snowflakes was great. It made my work easier because they are so detailed and it's really hard to get a great impression at the first time. So I always had to stamp one twice or even three times to get all those beautiful details. My sentiment says I choose angels it's a sentiment from the stamp set and I have cut out the label using my favorite things labels. I am going to stick that at the front by using some foam tape at the back and actually this is a part of a bigger sentiment but I decided to stamp the smaller one on the front and although it doesn't really make sense they have to open up the cart and read what's inside. I am going to stick that panel or my cart base by using foam tape at the back and I just had to empalse my snowflake a little bit more by adding some pink gems that I had in my stash forever so it's a great way to use them. I am going to add the gems all around the snowflake as well as at the center and on the inside I am going to stamp the rest of the sentiment that says when it snows you have two choices shovel or make snow angels so in the front it writes I choose angels and you understand what that means when you open up the cart. For the fifth cart I am going to do some coloring so first of all I am going to stamp the sentiment and then I am going to surround it with snowflakes I am using my memento toxido black ink to stamp everything because I will be using my alcohol markers to color the snowflakes So I am going to make an arrangement of snowflakes all around the sentiment coming from one corner of the cartstock all the way through the other side and once I am happy with the placement I am going to stamp them down Now you can see that I didn't get a good impression from the beauty of using a misti because I can stamp them again and again to get all that detail of the snowflakes For coloring the snowflakes I am going to use my spectrum noir markers these are alcohol markers and you can see which colors I am using on screen So I am using TB1, TB2 and TB3 and these match perfectly the color of my cartstock that I am going to use as a cart base that I have created from one of the cartstock that was included in the kit and I am going to cut down this panel that I have created to be slightly smaller than the standard cart so I have a nice border and as you can see I managed to stick the panel upside down but I hadn't pressed it so I have the ability to peel it off and stick it back again properly Now I am going to add some glitter on top of those snowflakes and I am using my Nuvo drops for that and I am also going to add drops outside the snowflakes just for some added interest I don't know if you can see the dimension or the shine from those Nuvo glitter drops but they are really beautiful in real life For this cart I have cut out this patterned paper and I am going to use this die that cuts out a snowflake and I am going to create a shaker cart out of this so I am adding some tape adhesive at the back I am going to stick on top some acetate to create my window I have created a border out of foam tape and now I am adding the snowflakes on the inside these come from the sequin mix that was included in the kit and finally I am going to use this scrap of patterned paper that is a scrap from a previous cart that I made and I am going to stamp there the sentiment For the sentiment I am going with snow match things so I am stamping it on the border of that patterned paper so you see I am making the most out of my scraps and then I am going to cut out this border and actually I use this border because the color of it matches perfectly the color of the patterned paper and now I am also going to cut out a strip of paper from the rest of that scrap to match my sentiment So this is slightly larger than the white one I am going to stick that on top and this way I created my sentiment I am going to cut it in size and stick it at the bottom of my cart So for this cart I am using the technique that I used before to create that window with parchment paper so I am securing the patterned paper to the cart base Temporarily I am making sure that the flap is open and I am going to use this rectangle tie to cut out a window out of both those papers the cart stock and the patterned paper So now I am working on a piece of this parchment paper that was included in the kit I am going to place the sentiment and for this cart I went with snow match things and I am going to surround or to be the snowflakes I am going to place snowflakes all around and then stamp everything with my VersaMark ink I am planning to emboss everything with my white embossing powder So once I was happy with all the stamping and the snowflakes that I had on my paper I am going to apply the embossing powder and hit set everything Now to make sure that this parchment paper is going to stick nicely on my frame I am adding some strong tape adhesive all around that frame I am going to peel it off and stick the parchment paper and then I am going to sound with that with the frame that I have already cut out from my patterned paper Now the cart is looking nice as it is but I can see the tape through that parchment paper So this frame is going to cover up everything and it is going to look nice, neat and finished So for this cart I am going to stamp with those 4 different shades of blue I am using one snowflake and I am going to create a border on one side of the cart stock So I am using my misty here I am going to stamp 2 eyes to get a nice impression and I am going to clean my stamp with the shami that was included in the kit I am going to slide the cart ink up the snowflake again and repeat the same process until I have 4 different snowflakes one under the other You notice I am stamping from the lighter to the darker color So this way I am creating kind of an ombre look So I am going to stamp the last one with the darker of the colors and my border is ready Now to embellish it even more I am going to use this strip of tape on one side of the paper I am trying to make sure that I stick everything down nice and straight I am going to use my scissors to cut off the excess tape and now I am going to glue it off and apply some glitter The glitter that I am going to use is by Nouveau and it's the fine glitter which is going to stick nicely on top of this tape and if you rub it with your bone folder it's not going to go anywhere So I have a nice shine on my cart and now for the center of the snowflakes I decided to go with those 3 different Nouveau drops that match perfectly the colors that I have used So I am going to add a dot at the centers which is going to add another touch of glitter on my cart and now finally it's time to add the sentiment For the sentiment I have cut out the word hello and I have run it through my Xyron sticker maker and I made sure to apply the sticker side on top of the word hello and not at the back This way I am going to turn the front into a sticker side and this way I can apply the glitter so that it matches the side of my cart With my glue pen I am adding some glue at the back of my die cut and now I can stick it on top of my cart and this is going to finish off this cart So let's move on to the next one Now for this cart I am working directly on the pink cart and I have created a cluster of snowflakes which I am stamping again with my VersaMarking on top of my cart base and then I am going to white emboss them I have applied my white embossing powder I am using my heat gun to melt the powder and I have already prepared the panel for the bottom of my cart So I have used these dies by Simon Says Stamp to create this scalloped edge Now this has enough space for me to stamp the sentiment Again I am going with one from the stamp set and this is Tiny Bikini which is a dye ink by Simon Says Stamp So once I am happy with the impression that I have I am going to stick that on top of my cart by using some foam squares at the back and just like I did with the rest of the snowflakes on the cart that I made today I am going to embellish them by adding some gems and this is going to finish off this cart Now for the last cart I am going with a quick and easy design So on this banner that I have already prepared I am going to stamp the snowflake in pink color to match the last cart stock that I have asked my cart base I am going to stamp the word Hello from the stamp set as the sentiment and then at the top of this banner I am going to add two eyelets in pink color again So I am using my cropped dial there to set them and through those eyelets I am planning to thread through some ribbon so I looked through my stash and I found some satin pink ribbon that matches nicely the color of my stamp and sentiment and I am going to secure that at the back I am adding some foam tape so that I can stick this banner on top of my cart base With the same ribbon I am going to make a tiny little bow which I am going to stick with some glute on top of the ribbon that I have already thread through the banner and just like with all the rest of the carts I cannot leave the center plane so I am adding that gemstone at the center and I am going to spread all around the background some of the white snowflakes that I had from that sequin mix So I am just trying to find out these that are a little bit of a pearlescent and I am going to stick them down with glossia accents and this is the final cart and now let's take a quick look on all the 10 carts that I have created today all 10 of them feature snowflakes on top So these were all the carts for today now let's take a quick look on what's left on the kit so I do have the ink pattern the shami I do have more snowflakes I have some scraps of paper 3 whole 6x6 pattern papers I do have a little pieces from those parchment papers and of course the stamp set So these were the carts for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel Thank you all for watching