 What's up everybody? How are you guys doing tonight? Welcome, welcome, welcome to the stream. We are here to party with you and put together a Prusa mini plus courtesy of loyal Moses. Hopefully he joins us soon so I can tell him thank you so much for that. Greg, Gustav, Dan, Lucas, Justin, Rover, Travis, Ram Design, Justin, everybody else, welcome to the stream. Here's, I know I think a couple other people are live right now. I think Jerry's drew an a droid thing and I know some people said they were going to come over after that, which is awesome. And sweet bees with us, congratulations on the win. Monday, Jeff Hutchinson, Andrew, how you doing? Man, I'm pumped. I hope you guys can hear me okay. Give me that thumbs up if you can. That was meant for you in the bottom of the screen. It took a minute. Caleb is here with me tonight. He's hiding down here somewhere in my screen. He wanted to come watch us to jump in stream yard. You can pop in anytime, Caleb, if you want. Tim, Ken, how you doing? Kathy O'Malley, how are you? Shane, man, I hope that thing is working better for you. 3D medic vents. All of the peeps are here tonight. So what I'm going to do currently I'm going to throw my right screen in full screen mode so I can no longer see the bottom of Caleb, but if you're there just talk to me because I can't see waving your arms or anything. So I went full screen over here. I got chat up over here and we're going to rock and roll tonight. I'm going to get this thing built hopefully quick. That's what I say every time I think. And then yeah, we'll have some fun with it. So I'm going to pop my keyboard and mouse. I went ahead and joined just in the background. I don't know if you can hear me. Sounds good. Can you hear me? Yep, I can hear you. Right on. I'm back here if you need me for anything. Everybody say, hey Caleb, he's a guy that edits the videos. Hey Caleb, he's the guy that edits the videos. Yeah, he gives us sweet bumpers, does some cool stuff. All the fun stuff he does. He does all the fun stuff. I do fun stuff. I don't know if the stuff I do is cool. I think it's cool. So we are rocking everybody saying hi. Nice. So what are you guys drinking tonight before we start? I finished up a, what was it, a breakfast stout just right before the stream. And then I switched over to mug root beer. Why not? Little root beer. So what are you guys drinking? Let me know in the chat. I got water too, but today we're going to play with three camera angles. This one, this one, which is the side and a desk angle that we'll use if we need to. No water in Houston. Oh no. I wish I could switch camera angles for you remotely. You definitely can't. I have it, I have it on my handy dandy stream deck right here. I'll just reach through the screen and push the buttons for you. Do it. That would be kind of creepy. That'd be kind of creepy. Bud Light, Bourbon, no water in here. Hey, everybody in Texas. Man, I hope you guys are doing okay. Stay safe. Get as much water as you can. If you don't have electricity yet, stay warm and watch that carbon monoxide poisoning and be careful with your water, man. I mean, I heard it's crazy. I know, I was talking to Brian Vines earlier and he said he went three days with no water. They just got water finally and he was using snow water, basically melted snow to like flush toilets and stuff like that. So, you know, stay safe out there if you're out there. Dr. Pepper, coffee, gin, Lewis is smoking, little green tea, Cathy O'Malley's having lunch. You know, it's crazy when we catch you at lunchtime. Oh crap. I knew you'd fix nightcloth. So ignore the giveaway thing with Jigger, because that doesn't exist right now. I just forgot that it to turn it off from Monday nights. But Monday nights, we give away a $50 Amazon gift card, so find us on Monday nights and you could win. Disable. There we go. Don't forget, everything else is good. All right, good. Going back to full screen. So I don't know if you noticed right by this elbow here. See that? Looks like one of the Wu specials. That right, yeah. That is a Naomi Wu 3D print mill printing away. Another printer I was super pumped for. I'm still, I still think that you should do, like I was saying earlier with like the people who have the steak knives on the Roomba with the balloon on the back, have two Creality printers printing something sharp towards each other and whichever one pops to the other one's balloon first wins. Yeah, I want to do two swords, like coming at each other like this. It'll be awesome. Sounds like a good Saturday night. I have some huge plans for these things. I got to figure it out. I got to dial it in. I only had it live for a day or two. I filmed a video on it. It'll be coming out soon. Tomorrow morning, no, I'm just joking, Caleb. I'm gonna be up all night editing. Justin T just filled it out. Don't fill it out. There's no giveaway tonight. No giveaway. All right. Here we go. Let's get this thing open. So this is courtesy of Loyal Moses. If you remember, I believe it was the first show in November or the last show in October. I can't remember right around there. We were talking about him. He gave one away during our live stream event and then he said, you don't have one. We need to fix that. So he ordered it. I just got it recently and now it's time to unbox it. We're going to do that right now because I want to get this thing built and playing. Let's see. I will say when I built my Loyal Moses is in the house 3333. Are you here for me? Did that rhyme? I just made that up. I don't know what that was, but thank you so much, Loyal Moses. This is all because of you and I really appreciate that. Killer Penguin says, I will say that when mine was done, the bed was not level. That was way too close to the nozzle. Left side far too away. Had to do like 10 to 12 rotations, which seemed a lot. I don't know what you're talking about. You're talking about this? Brian Vines is in the house with water. He's got water. Joe Telling did a sword jousting match. What? I missed that. How did I miss that? No giveaway yet. Moses is here. I don't know. This was special. Greetings. All right. Let's do this. So I open the magical box. Let's see. Let's do this. That's going to be blown out. Blown out. Yeah, we can fix that though. Little dark, but I'll take it. Here we go and it's far away. There we go. That's what's inside on the top. We have a check, a checklist, handbooks, some samples, all the good stuff. What's up? Killer Penguin said yes. When he was talking about the one side being too close to the nozzle, he was talking about the Prusa Mini. Crazy. We'll hope we're not like that because we'll have to figure out how to fix it. This is all my first week. I mean we don't have to figure out how to fix it. He already knows. There you go. Congratulations on getting a brand new original Prusa printer. Boom. So I'm going to set everything out. We got the handbook, which is super awesome. A couple of samples of filament. Looks like alcohol wipes or something. A needle for the nozzle. We got that. I should do like picture in picture here. We got a filament sensor because Moses is awesome and he hooked me up with a filament sensor. Power cord of course and it's even USA. My CR30 here behind me came with a European power plug. We have the spool holder. I just want to get this all out of the box because I know it's not going to take long to build if I actually stop talking and build it. You know that thing. More spool parts. Accessories. Looks like some screws, a wrench, some foam pads. All the good stuff is in this bag right there. All right. Man. Don't over tighten the screws that touch the, okay perfect. Thank you Greg. I like the name of that printer Dan. Which, which printer? I didn't see what Dan said name-wise. We got the gummy bears. We know this is original now, right? All right. We got a little lubricant. Dan made his mini plus Moses. Moses. Nice. We got the SD card. That's a sweet SD card. All right. What else we got? We got a box, a filament of Prusa Galaxy Black Glitter. Boom. Right there. We'll set that over there. We have the steel sheet of textured and the steel sheet of PEI. So now I'm way too low. Maybe I should just auto it, huh? So it would be awesome, right? There we go. Textured and PEI. PEI. So that we'll put over here because we don't need that yet. Hopefully I'm not missing anything in chat. I'm just rocking it. I named my mini Moses. Oh, that's what you're saying. I named my mini Moses. Let's see. We got, we got to do the boil water thing. Man, I'm sorry. Textured. I love the textured beds. Those, I have them on a lot of stuff. I love them. Okay. Nothing in that flap. I go to Moses, Honey Badger. I'm a Dillo and the E3P001. It looks like that last one should be like EP30 or something. All right. Under this magical flap, it looks like I have an LCD. I'll put that there. And some foam. Not too much foam though. Not too much foam so far. I am not used to this cardboard. Like it's crazy to get one with cardboard because there's so much foam lately. Voila. There's so much printer crap over here. I haven't got to the dump lately. All right. Minimo for short. I like it. Hmm. Let me think. I'll have to think of, finally, Tim Jackson, how are you? I like the gear shaped cut out of the box. Yeah, that was cool right here. Yeah, yeah. Like this. That's what he's talking about. That's cool. Just throwing stuff around. More box. This is big stuff here. Power supply, baby. Why is nobody super chatting? That's a good question. Otherwise, if you don't want to super chat, I'm good with not super chat. You can always hit my PayPal. They take less. I think Google takes like 30% of super chats or donations that come in here. PayPal, not so much. And I will shout out PayPal's tonight. I got my phone here and it is on ding mode. Also known as not silenced. Tripods, garage, I want one. Jerry, how did the stream go, man? Putting a droid together, I think. So we got the base, which is pretty damn cool. And I just heard those, those, what's it called? T-nuts in there, sliding around. I'm just fishing. I want to make sure I get it all before I dump this box. Super exhausted. Well, Justin, come on. I've been up since 515. Super, super exhausted, he said. And that's gone. 33, 33 from Loyal Moses on PayPal, it looks like. So that is the gantry. Tis the base. Brian Vines, 599, as Joe would say. Are you out of your mind? I'm pumped tonight, man. Am I a little amped up, Caleb? Thank you so much, Loyal. I appreciate it. You rock, man. I mean, you definitely have some energy, but I mean, I'm not complaining. Dude, I'm so pumped for this. Not only pumped for this, but I'm pumped for this. I think it's going to be the crocodile. I have no idea what it's printing because my SD card came in Chinese or the prints did. So I'm like, sure. So the other day, I printed a whole bundle of spaghetti the first night after I got it going. It waited for like two, three hours. And then just spaghetti the rest of the night. I woke up to a spaghetti mess. We'll show it on Monday, I promise. Thanks, Loyal. I'm making sure it works. He was testing the PayPal. Ethan's dad, Marcus, is in the house. How are you doing, Marcus? All right. So out there in the land of Prusa-ish. Prusa-ish? Prusa world? I don't know. You're going to call it. Hey, we got stickers. We got some sweet stickers. Yeah. Is the manual here better to follow? Or should I look online? It's Caleb. Tonight, we got Caleb with us tonight, Loyal. So Caleb is a friend, and he's the one that edits most of all. He edits my videos. Yeah. So there's that. He is my Sean, but he's Caleb. I'm the great value brand, Sean. Yeah. If you ever see like the cool intros and bumpers and stuff like that we do on HotMakes. I do this because I'm hearing them right here. There's a speaker, but Caleb is the man that made them. Sean edits Joel's videos. I just add explosions and fart sound effects to Jim's videos. Yeah. Yeah. Yeah. I like it. Someone said go online and follow their instructions. Come on. That means Frank. Hey, look. Thank you so much, Frank. $4.99. I can do a little penguin dance. I forgot I had that in the center of the camera. Uh, $10 for Michael. Thank you so much on the PayPal front. Thank you, man. Michael, thank you. All right. So everyone is saying go online and look at this. There are tips and tricks in the comments. Yeah. What required me to take a screen up? Sweet bee. I don't know what you're talking about. I don't know about that. Make sure Jim sees that. Oh, yeah. He wants me to see the, he wants me to see the, what is it called, manual, right? Yeah, the link. I'll send it to you in the background chat. Can you pull it up and share a screen? Oh, yeah. Yeah, I can do that. And then what we'll do is we'll look at it and then we'll swap over. I'll have you swap over to mine and we can show it and then, you know, go back and forth. Yes. The gummy bear console, I was just going to pull up in my instructions because I just, I really just anxious to go. I mean, I don't really want to wait for the manual online, but I'm going to have to, I guess. They, everybody says you have to. I watched Joseph Prusa's build video like two hours ago, just to see what I was getting myself into. It's pretty simple. It looks like, Justin, we should do, that would be funny. One of these streams, we should have Caleb or someone pull up the instructions on their side and, and tell me what to do. It'll be like, keep talking and nobody explodes. You ever play that game? Yeah, yeah, yeah. Yeah, it'll be like that. But we have it on our, we have a couple of Oculus quests. We have a quest and a quest two and that's fun game. It's fun game. Ethan ate all my bears. Didn't even mine. Nice. Shorted. I was shorted one gummy bear. Oh, no. That's not good. You know what? I gotta go over here. That is massive. I don't know if we know. I just have to, I have to grab my power. This is affectionately known as the Moses desk. I'm working on it still. I'm a huge Batman fan, Michael said. Thank you for that. Thank you for that, Michael. I'm just going to throw my phone over here because I can. So this, this bench I'm working on is all because of Loyal Moses and everyone else who donated during my Christmas streams. This thing is turning into just amazing. Whoa. I'm sorry. Hang on. Trap on scratch. Thank you so much. This money is sugar-free gummies. Uh-oh. Like I might have to get my act called through a coffee straw. I may, I might have to get paid time off if I do that. All right, that, I can't read that. It's too small. Yeah. I gotta figure out. Because I'm so far away from my, Michael said he's a huge Batman fan. Is that a little better at least? No, blow it up. Yeah, for now. That makes you tiny. All right. That's okay. And then what we'll do is we'll talk through the instructions. You can go back. Go make as big as you can. Yeah. And then we'll talk through the instructions and then what I'll do is I'll swap my camera and you can flip in what I'm doing. So step number one. Step number one. Pre-assembled versus kit. Okay. Different hardware revisions. So you have almost assembled the kit you have to build from scratch. Nailed it. Step number one. Well, so do you have the, you have the parts that we assembled version? Yeah. What was this said? You're gonna, if you're gonna stream, let's get you the pre-assembled version. So that's what we did. Okay. So what do we do? Vote it with Capricorn. I like it. Actually, I probably would do TH3D Tough Tube because I had like three meters behind me. Tell me bears. Fire tools. So which step does it say we have to go to? This is gonna be difficult, isn't it? It doesn't say. Just scroll to two. Let's see what's on two. Different hardware revisions or prior tool labels. Got it. Um, we are here for you. Great. Maybe I like it. Maybe we're hopefully we're not missing anything. Right? Xe axis assembly. Yeah. This looks like what we're what you're looking for. Perfect. Because it's mostly assembled stuff. Got it. Yeah. So I was watching, who was I watching? I don't know if me having the instructions is going to be more helpful or just more challenging. I don't know either. All right. We're going to start with, and I'm not missing anything in chat. Let's see. Got my next stream. Nice. Next stream. Highest bidder. Name's the Ender 3 Pro. E3PO. I already said that. $10 from Daniel. Thank you so much to the PayPal. Okay. Following steps. We're going to do XY assembly. So we need one M. Oh, I better get my screws out. I'm hoping we didn't skip any. If we skipped any, we'll see what happens. Right? No, the last step was just letting, it's just a step letting you know that they have support, basically. So. Oh, yeah. Step one, essentially. I like support. Support's good. Yeah. All right. We need an M3 by 40, an M3 by 20, and an M3 by 12. The second M3 by 12 in the package will be used later on. All right. Oh, I'm missing some. Ah, right here. This is just for the school holder. We'll put that aside for now. Oh, let's see. I know Proustas are supposed to be the caddies of the viewers. Why would anybody want to printer this small? Can't you print? I can't see what the rest of that says. Something about a bunch of benches. You know. What can you print besides a whole bunch of benches? You can print a lot of stuff. A lot of stuff. So I asked myself that originally, myself. I was thinking, you know, when I first saw this, it was at IRF. They unveiled it while I was there. Good stuff. And I was like, that kind of reminds me of an M3, or I'm sorry, an M2, but it's small, right? But it's not about the size. It's about how you use it. Is that what I heard, right? Let's see. Daniel, thank you. Thank you, Michael. Thank you. Okay. Just making sure I didn't miss anyone. So I'm telling you, from what I gather to answer that question, it seems crazy to have a printer this small, right? But from what I hear, this thing is absolutely awesome. What do we got? We need M3 by 40, M3 by 20, and M3 by 12. Yeah. And I think that's just getting those prepared for future steps. Yeah. I'm prepared. Here's this one, this one, and this one, maybe? Yep. Yeah, yeah. All right. I'm going to pretend that's right. There's a picture here. Got it. Nailed it. Nailed it. Screwed it. Yeah. Next, what was the second thing it said? That's it. Nope. Got it. You'll be used later on. Great. For the following steps, please prepare the Y-axis foam block pads for set one. All right. I got the foam block. Is that this one? I believe that's these. Yeah. Then the next step is separating the foam blocks from the pad. Well, you got to keep them separated. Or foam pads from the block, I guess. Foam pads from the block. Yeah. My name's not Jenny, though. Oh, it's Jim. All right. Did I miss the Let's see. I mean the bed springs. Nice. That's my wife said. The mini is a great little printer. Yes. All of the printers we have, we have more minis than any other, and they print two to one, what everybody else did. Nice. I can't print 300 mando helmets. No, that's true. Well, you could be, he says 300 mando helmets for ants. I like that. All right. So I got five foam pads, keep the sixth as a spare. Check. Moses is reminding you to cut the connectors off the cables first. Cut the connectors off the cables? I think he's messing with you, dude. Yeah. Don't worry. I'll change my belt fluid, too. Yeah. Let's do this just for a second. I'm going to throw my screws. See? Right there. Got the screws. Tim Jackson, thank you so much. I really appreciate that. Tim, seriously, you're welcome. I'm glad that we could help out on your journey. Anytime. All right. What's next? Got the foam pads out. Next. Next. Install them. Where are we installing them? Underneath? Yeah. So does it show where we just make it? It's with the XZ axis. The XZ axis. Yeah, I believe that's the other one. Yeah, the tall piece from earlier. The tall one. Yeah. Yeah. So that's where we're going to start. Okay. We're going to start there. Someone's screaming at probably screaming at the TV right now. So let's see. I'm trying to get this in angle. So give me a second. I want to make sure. We got these screws ready. What was that about? I think they were just making the XZ axis. And it's going to go right over the crack, huh? I see where it goes. It looks like there's a hole there. Now that is, that's nifty. Check this out. See if I can show it. See the hole there? Carefully, maybe. There's a hole right there. That's fit for the foam pad. It was a family stream, Jim. Come on. Yeah. While you stick your pad in the hole. Yeah, right there. Look at that. We got step number nine done, baby. Yes. There is an ethernet port on the printer right there. It's not focusing, but I promise it's right there. Here. Focus. There we go. Yeah. Ethernet. I definitely got the pad on that one. What's next? Not letting that fall over. Foam pads upside down carefully. And they're going to go on the outsides, huh? So right there and right there. Yes. Thank you. Let me bring this up into the camera view. Maybe. Wow. This is tricky. I'm all sorts of backwards. How's that? Look good? It looks decent. I could do this. Yes. Simple page shows you what the printer is doing. Yes. So this, these are go here. It looks like. I like it. On there. This is sweet. It probably keeps it actually quiet. Moses is really trying to sabotage this build. What is he saying? He said the black cable that's attached to the build plate needs snapped off. Oh, just cut it? That's okay. I heard that if I follow directions, he orders another one. I have to follow directions. Perfect though. It's from what I heard. All right. Check, boss. What's next? Besides getting a mess going on. All right. The four foam pads, but they had sticky on them, didn't they? Yeah, they got sticky. So they probably mean glue, you know, opening the box with the electronics in it. Okay. So we're going to do that next. Make sure it's in the upper position. Let's see. I might move this. I don't want this to fall over. I'm not, I'm not like in the wobbly factor ever since I put that pad on there, right? It's like, whoa. Okay. Don't touch. Dan said that. I think Dan is saying that Moses did the same thing to him. Oh, did he? Yeah. That's awesome. Let's do this. Maybe this will be a little better for right now. There we go. So I'm going to take a screw out right here. Moses, did you get, did not get edge of tech at Moses Ed? I don't know what you're saying. I'm sorry. Fix him, dude. What's up? Fix him, dude. The printer's doubles the size of his hand. Yeah. It is very cute, by the way. I mean, like super cute. I'm actually really pumped for this. This is going to go on my desk at work. And I was recently given permission to bring it, to bring one back to work and print stuff we need at work. So. Oh, that's awesome. So yeah, I'm really pumped about that. So I'm going to take that piece out. Hopefully, that was supposed to come off. I'm going to take that out. Yeah. I'm mostly kidding. You never know what Moses told me to cut stuff. I just cut it. Don't forget, everybody, I really appreciate the donations so far on super chats and PayPal. PayPal is awesome because it doesn't take the 30% like super chat does, but I appreciate all of them, the stickers, the chats, all of them. And if you do it, the penguin pops up right in front of my face and reveals my true self right before I have a Snickers. Okay. What's the next step? I'm assuming you did this part because you already have it off. What? Yeah, I lifted it off. Okay. Connecting an LCD cable. I watched Joseph Proust do this earlier today. I am an expert. I'm an expert cable connector. Are you sure that Joseph Proust, a guy, knows how to build these things though? Nah. He probably had a boss doing it. So this is the packaging, the LCD and the cable came in. I really like their packaging. It's really nice. Little bubble action and it's red orange on the inside are supposed to be red. I hear orange, I think, but we got a sweet orange control box screen LCD. Whatever you want to call it today. Little silica. So we're going to take the cable and I'm going to cut it in half, I think. Is that right, Moses? So just take this ribbon cable here. I think we cut it in half because you only need half the length if I'm right. Let me know in the chat. Don't do that. If you're watching it, don't cut this in half, all right. Don't do that. All right, let me see what it says. Put it in the side. So there's a hole right here. I believe that's where the, this goes in and then it plugs in straight down below that. So it goes in like this. I should show this, you know. We are doing this. What are you drinking tonight, dude? What's up? He's still trying to sabotage it. He says, snap the tab off the build plate, cut the connectors off. Just walk away. Oh, we're going to wire these one by one. I love it, idea. I love it. Moses, you're cracking me up over here. Jesus. I mean, that's such a genius idea. So what I'm doing is just feeding this up in, I believe, maybe. And if you watch Prusa's video, he said it would work better if he didn't have sausage for fingers. I think he was trying to get at, he has sausage fingers. And then this is actually going to sit. I don't even know if I can show it very easily. It's going to sit down in there. Yeah, there we go. Yeah. Yeah, debit card, not your credit card. And then I'm going to push this in. And we have, we have, we have interface. We have it, we're right there. It's good. Okay. I don't know how much we need sticking out. So I'm going to leave like that much. Sure. Why not? All right, next. I wouldn't steer you wrong. None of my, I mean, he's worked, but I understand. But it's unrelated to my tips. Nothing I have works, but it's not my fault. All right. What's next? Can you make that a little bigger maestro? There we go. Hey, it's a root beer time. If you're just joining, what are you drinking? I've got some root beer currently. If you don't succeed, buy 15 more. I'm, I'm drinking Loyal Moses Lies tonight, apparently. Yeah. Loyal, Loyal Moses Ale. Loyal Moses Ale. The LMAL. I like that. It has a ring to it. Read the following lines carefully. You need to align all three t-nuts in the y-axis with the correct counterpart holes. There are a total of three. The first is the longest. The first cut is the deepest, Caleb. Just remember that. Okay? Yes, I will remember that. So let me pull this one back. I'm going to, I'm going to change up. So the first is the longest, which would be this one, and it used, and it's be used to connect both parts together using the M3 by 40 screw. The second is the second longest, will also be used to join the parts. The third is going into the top of the extrusion, and I see that one too. So I see it. I see what we got here. Now we just got to turn it around and get it there. How does that sound? It says don't insert any of the screws at this time. Wait for the following instructions. Don't, don't what? Okay. What am I waiting for? Well, it says, so I look at the extrusions, but it says don't enter, don't insert the screws at this time. Got it. Yeah, here's one. I think I got that one goes all the way through there. Here's two and three on the top nailed it. Now what? Yeah, as opposed to Moses stout. Yeah, LMAO, Moses stout, you know. It says, uh, second photo shows the inner side of the XZ assembly. Got it. Okay. Take a look at the small hole on the bottom edge. We'll use that hole in the following steps. Okay. You good? There's a small hole on the bottom edge. I think I can use this thing. That thing. Yeah, sure. Oh yeah, I see it now. Yeah, yeah. Nailed it. Oh, wow. I just realized it's color coded. I'm a dummy. Okay. Okay. Yeah. So now take the Y axis, pull it out carefully. There's a Y axis motor cable in here somewhere. Hang on. I see it. It has been pulled out carefully. Check. It looks like you need to pull it out towards the outside of that assembly. Oh, underneath it. Oh, yeah. It's probably going in that control box. So that makes 100% sense. Okay. Check. It says place the right Tina approximately in the middle of the extrusion's length. Right Tina in the right at the middle layer. Boom. Nailed it. Okay. Let me switch this over. Let me see what I got here. So let's see if this is any better. So there's T nuts that are built in right here and right here. Okay. Let me see if I can show you that. Okay. So there's T nuts built into the extrusion's here and there's one up on the top that's floating up here. So what I saw in the video earlier is that this is going to butt up against here like that if I remember right. Hopefully. And then it'll all screw in like that and be happy ever after. How do you like that? Is that how that works? David Randolph's in the house. What's up? So are we going backwards? Does this say slide the bed all the way backwards or forwards? I think it's backwards. Away from looks like away from the stepper motor. Away from the stepper motor. Nailed it. Okay. We're away from the stepper motor now. And it says line up the T nut with the longest hole. Right? Preparation. We're still on preparation? No, no, no. We've done some stuff. It's just preparation for the next step. So this wants you to go underneath. Oh, I see. Just wrap it underneath so it's out of the way. Nailed it. Nailed it. Okay. What? Oh, I see. I want you to go up and in there. Okay. I'm a little nervous about that part, but I'll just do it because why not? Okay. We're up and in kind of next. It says it's only a temporary solution. Yeah. Yeah. Joining the, all right. So this says move the, what does that say? Joining the parts together. What's the piece in his hand? I'm pretty sure that that looks like a stepper motor. Got it. I got to put that up through there. Got it, got it, got it. Okay. So the Y stepper, right? We're pulling it up in. Okay. Does it go through the little hole? It does go through the little hole. That's fancy. I think it goes through the little hole. It does. Yeah, it's that hole that we noted earlier. I apologize. This is hard to see. I'm going to change the camera angle in a second here. I should just put it on the front. All right. So I'm up through the little hole. Okay. Now what? Here. Let me do this. Yeah, I mean, so I came under here up through the little hole here and it's sticking out right there. I would say, yeah, next. Push the two parts together. Well, I got to think, I think I have to line up my, yep. Don't I have to line up the T nuts, right? First? No? Yeah, no. Yeah, it says, make sure that the clamp is fitted directly on the T nut that you moved to the center of the extrusion. Make sure that who what? What did you say? I said, make sure that the it's the XZ assembly is directly on the T nut in which you moved to the center of the extrusion. Got it. I can't believe it. I'm just going to set this here just for a second. I want to grab the right, Alan. French. This is riveting, right? Little hole, big hole. A hole is a hole. Oh boy. This is riveting. Yeah, see that? We're going in. We're going for the big hole. I'm talking about this one right over here. So there's a hole that goes right here, that goes right here, and it goes all the way through to the other end there. So what I'm going to do, if I can get this camera to not be crazy, it's kind of hard to see there because it's all all dark. I'm going to move these over a little bit. I'm actually going to push this through with my Alan wrench because I want to see where it's coming out. Those belts go into the thing of a jigger. Nice. That will definitely improve your gantry screws to the base. That'll definitely improve my prints. Yes, it will. Oh, this is the man. He's got some funny stuff tonight. I know it's those 37 cheeseburgers he ordered. You are? It's those 37 cheeseburgers he ordered. Right. So I'm just trying to get the just trying to get. There we go. We got it in through the hole. So let me just show you. We officially have a screw through the hole right there. Yes. So now I shall find said screw and match it up with said stepper motor or stepper motor. Did I say stepper motor? Said nut. Wow. What's up? I'm using your your catchphrase. Wow. Oh, yeah, that's a good one. I have no idea if I'm screwing anything here. Use that as a catchphrase. I'm not. So here's a question. I think this is actually going to slide back and lock into place, but but I need to get that into that. Right. I mean, that's that's the object is always to get the thing in the hole there. I might have to swap Allen wrenches. This one's driving me nuts. I'll swap real quick. Well, what's going on here? You guys are looking at nothing. Yeah. Is this any better? It's the way that I'm ever watched. Huh? I said it's the weirdest episode of cool time I've ever watched. Right. That's a little better. Yes. Text wrench to line up the holes. T nuts before putting the screws in. Yes, I pushed the I pushed the screw all the way through and I think I have officially I got engagement. So that's awesome. So I don't want to tighten it too much because we want to make sure this next one works. So let's see if I turn this towards you guys. Greg, Greg is telling me to tell him tell you that this is the tricky part apparently. This is the tricky part. This is my recital. Very vital. I can hear myself. It's weird. You can't. Yeah. I wonder if I have some echo going on. Yeah, I think you want. No, not me. No, I missed. No comment. It's like a scene from Daddy Daycare. Yeah. Let's see if I can get it out. This is a really good scene of my hand. Right. Everything always goes south when I'm taking around. There we go. I'm going back to here. Okay. We're going back to there for a minute so you don't have to stare at my hands. So basically what I'm doing is trying to get this lined up and I missed the second Allen wrench a little bit. Allen wrench. I missed the second Tina a little bit. I don't know what I'm talking about. Hey, Dan is making a pretty good suggestion. What's that? Using a zip tie to help keep the Tina in place and hold it up so that you can line it up with the screw. I like that idea, but it might be that gravity is making that Tina in the t-slot like sit at just the right angle that the screw is not going to engage with it. Nailed it. Oh, you got it. Look at you. I, um, thought I did. Are you meditating now? What was that? Yes. Yeah, yeah. That's meditation. I believe we have engagement people. We have engagement. Nice. Engaged. We have two engagements. Number one. Hey, is this thing still printing? It is. It didn't go spaghetti yet. It was freaking miracle. Dan says he thought he had it too for about 15 minutes. He's a funny guy. So now I think I do the top one, right? Do that one. Yeah. And then you do the top one. I remember this from Prusa's video. He lined up the hole from straight down. Now, on all three of these, it's saying not to tighten the screw. Holy, I didn't, I didn't tighten them all the way because I think we're going to slide it back. Okay. I'm not, I'm not trying to be naggy. I'm just trying to help. No, I appreciate it. You know, I appreciate the background feedback, right? Because sometimes, you know, you're in a live stream and you for one are just talking to yourself. And number two, you just miss stuff because you're trying to pay attention to chat instead. Oh, did you just say you miss me when you're streaming without me? Yeah. That's what I meant. Yeah. Okay. Yeah. So I'm going to tip this up a little bit. Practical printing is also saying when you do tighten them, don't over tighten them because it could crack easily. Nailed it. It's drink time, baby. I wish I had something better in this than just root beer. I need some of that El Capitino. Oh, what did they say? Cut the extra PTFE tube. It's only there for shipping. Too good. All right, now I think we slide it all the way back, right? We are on. I think it's supposed to. Yeah, the step. I believe I can fly. Wait, wait. Don't we? Oh, we don't do final tightening yet, huh? No, no, no. We're on step 18. What's 18 say? You'll move the entire XY, avoid pushing, avoid push grinding. Okay. Against the aluminum extrusion, you might scratch it. Okay, don't do that. Leave a small gap while moving the parts, rotate it the back of the printer towards you, push the heat bed all the way to the front. Nailed it. Hold the y-axis assembly, move the XY assembly to the back. There's a notch that indicates the correct position. Show me the notch. That appears to be a notch. I've got the picture up. I think this is not a notch. Oh, yeah. Yeah, yeah. The notch. Here, let me flip it. I'm going to show you my notch here, okay? That's a better notch. I'm going to show you. Oh, you can't see the notch. It's right here. Let me see. Loyal, I just wanted to point out my notch is, my notch is good. I mean, it's almost notch now that I just moved it. It's definitely not almost not. But it will be in a second. It's right there. Yeah. I've now just showed the world my notch. That looks like a notch for me. Yep. Mac is here. It's not an easy build. What's not an easy build? What was he talking about? Do I tighten now? Yeah, I'm tightening now. Screw it. Yeah, it says step 19 is yeah. Once I get it in the notch, I tighten. First the M3 by 12, then the 40, then the 20. I started with the right one even. Yeah. So yeah, do the what was, it says do the top one, then the outside one, then the inside one. Oh, oops. Yeah, you totally started with the right one. Yeah. So this one, this one, and then now. Yeah, it's this one, this one, and then this one. Shit. It doesn't matter really. Am I gonna have to pull up the beep button, Jim? It's okay. I'm gonna, I do the top one. Mac said something about it's not an easy build. Tell me. Yeah, I was trying to figure out. Yeah, I was trying to figure out what's not an easy build. PS, NAC, Carl, my main man. I'm trying another print on the 30 behind me here. My first one went all sorts of spaghetti. Okay, so it looks like he was responding to Greg who said he wanted to build a white knight. Oh, everybody wants to build a white knight. What's the white knight, Jim? That belt printer. Do you remember the belt printer at Murph? Yeah. That's Carl. Yeah, okay. That's cool. Heck yeah. Is that the, I think it's really cool. All right, what's next? Okay, here. Step 20. Sneak peek. Sneak peek. You know, I'm just gonna leave that there for a while until the camera falls off, right? That's how you know your print is done. Yeah, this is going to be an interesting alligator because I'm using a mystery roll from Coex and the mystery roll from Coex is changing colors. The voice is Caleb. He used to work for CME CNC. If you remember the dude that got the CME CNC tattoo and then he got like the barnacles tattoo. Yeah, I've got CME CNC on one arm, barnacles on my shoulder, and I've got atomic on the other arm. That's right. Okay, what's next? Harbors. Harbortime. How many do I eat? How many do I eat? Does it say? What? If we're following the picture, it's one, two, three, four, five, six, it's 10, 10 bears. Yeah, but does it say eat all 10? It says you, the exact dosage is absolutely critical. And then it said what? Said eat the upper row, leave the others for the next stages. Okay, so eat three. So I have to eat the three yellows? Three yellows, yes. I don't know that the colors are going to match. These are not sugar free, but this is my sacrifice. Come on now. Okay. Sacrificial Harbors is going to be my new band name. There you go. This is my sacrifice. Don't do it. Don't do it. Okay, next. I like this having an instruction, dude. Yeah, this is actually, I thought I wasn't going to be much help, but this is actually, I think this is a good setup. Well, I like it because I can talk to somebody and hear, but I can talk and not only hear myself, and then I can be like, what was that? What was that? I don't, they were not sugar free. If they were, I gotta go. Jack. Moses says he wishes he had a Caleb. He wishes he had a what? A me. Everybody needs a Caleb. I do. I am totally, I'm totally with, I'm down with everybody getting a Caleb. Moses, Moses, the comment I'm putting on screen right now, I'm replying to that. I don't know if, I don't know if you're serious or if you're trying to joke, but I'm, I'm down. Three minutes. Can we face time or zoom? They are wrong. I ate the whole bag at once. Well, there's your problem, Adam. Adam, there's your problem. All right. What do we got here? Next. We're on the next. Step 21. The struggle is real with keeping the shop clean here. Okay, I got those three. I got the screen, I got the screw, and the outreach. Okay, sorry, sorry. Yeah. Mounting, what? Why are we turning this up? It's a turn down for what? Can I do it this way without doing that? Like this or something? What, where is that? Oh, I see. I got it. Oh, yeah. It's cooking. So. Oh, that's why, because you've got to put the screw in from the, from the inside. I got to put the screw in from the back, like that, right? From the inside of the. Like that. It's like a piercing, right? You get a Caleb, you get a Caleb. Yeah, yeah, yeah. And then, and then, you know, it screws into here. Okay. So it screws into right here. There's a little hole. So I don't, I just throw it on the power supply like I did and do it that way. I like that way better. I don't like to lean it on the gantry. Dude, I am literally just pumped that this didn't blow up yet. I think, I think wherever they were putting these instructions together, they didn't have all the parts necessary. They, they only, they were limited. Maybe I'll get Caleb's sweet. Yeah. But enter at your own risk. Trust me. Oh, wow. Now everybody's going to have explosions and fart noises in my video. Right. That is true. Look at this. I don't know, man. Come on. I think fart noises never get tiring. This is an upgrade to using the little one. If I could keep it on the ding screw. There we go. Yeah. This is an upgrade here. This is much better and easier. It looks, it feels like I'm cutting the threads in a, in the printed part here. That's what it feels like I'm doing. Okay. What was that? I dropped them. I dropped the screwdriver. Dev, thanks for sharing. Thank you so much. Lord Moses, sign up, sign up for him in the description to win a Caleb. Thank you so much. $10 each. Oh man. I don't know. You have to buy a Caleb and donate it. Yeah. Thank you so much guys. 10 bucks a piece. Wait. Oh, geez. Oh, I've, I heard it ding. You would penguin ghosted. Thanks, Dev. That was nice. Thank you so much. You guys are awesome. Thank you. We, uh, we're going to move on to step 23. Uh, what's going on? We've got a frozen camera. Again. It's not that cold in there, is it? No. Weird. Don't try turning it on, on and off again. I'm not trying turning it off and on again. An OIT? I just did. I think it's probably, uh, it's probably something I can control currently because I don't have time. So that is on and it looks like you can adjust it. I like that it's adjustable. It's got little notches. Sick. Okay. I think we should move on. Left handed Allen keys. Connecting the LCD on. Now this is where I had to have it upside down. Damn it. I saw this earlier and it made me cringe. All right. Let me, uh, let me see. Still nothing. Well, son of a gun. What camera is that? Is it a web camera? Is that your 80? I think what's happening. I think OBS is being stupid. Oh, it is my, it's my side cam. Just make sure your side cam and your main cam never meet each other. Yeah. You don't want to do that. Well, I'm going to have to say screw it in a second here. Uh-oh. Uh-oh. Man down. Can you still hear me? Yeah. We can still hear you. We have a gray screen. The gray screen of death. I may or may have not accidentally closed OBS. See what happened was. That makes things a little difficult. Hey, we got a plus 10 for the IT crowd reference. Hey. Thank you. Let me see. Let me hit done. Let me go back to side cam. Yeah. Hang in there, folks. We got a weird camera issue. Yeah. Hang in there, folks. We need a picture of a kitten hanging off of like a tree limb or something like that with a hang in there, but with your, with your glasses on or something. Yeah. I actually put contacts on the other day and people are like, what is happening right now? Yeah. It was pretty fun. I'm not going to lie. I'm kind of enjoying this. Typically, I like kind of just kind of hanging back behind the scenes, but I'm liking interacting a little bit. So. Well, that just blows. That's the desk cam. Oh, I see. I see what's happening here. Get out of my life. Oh, okay. Ah, not you. No, I am. I'm just going to say screw in the second here because it's not worth it, but what's, uh, yeah, I don't know. I did something. I did something. It hates me. Tim Jackson is asking if the camera went out of the virtual cam in OBS. I don't know if that's helpful or not. That's how I shut everything down a second ago. Yeah, like this. Okay. Like I just did now, right? Hey, Nick. Have a good night. You want to stop by, see if we got the CR 30 running. Have a good night, Nick. Thanks for stopping by. Good night. Good night, Nick. It's time. Good white night. Oh, all right. Come on. Hurry up. Yes. I think I got it now. That is silly. It shouldn't have happened. Look at that. So, we have this one, this one, and of course the crocodile cam. My bad guys. Sorry about that. Crocky. Here we go. We're back. It was little Moses. What happened was he told me to cut the wire. I cut it. I don't know. All right. What's next? We're running the LCD cable. Yeah. I think we're on step 23. Okay. Let me carefully pull this closer. Shoot this over here like that. So, what they want us to do here is crank up that ISO so you can see it. Too much. There we go. So, what they want us to do is run the cable through here. I'm going to pull this up so it's not in there so much too. Because I don't want that hanging out. I don't know that guy, the cable between the Y-axis motor cable and the extrusion. Oh. I don't know that it's telling you to like tuck it into the... Oh, right here? Yeah. It tells you to fold it. Like... Does it really? Yeah. It's crazy. Like, right here, Billy Rubin was like, what am I doing? I'm not folding this. Which is very legit because... Oh, yes. Sorry. Yeah. There was a next step. Gently insert the cable into the extrusion. Yeah. So, it wants you to like put it and plug it in. I mean, the issue with folding a ribbon cable is the width ways. So, if you fold it in half long ways, you might be better off. So, I folded it. Okay. You're supposed to cut the red wire. Ah! Yeah. Just... Keep talking. Nobody explodes. Everybody's saying just fold it. What if I don't want to? What if I just want to pull the... Print the like clips and make it like clippy? Jim, an important part of doing this kind of work is you've got to know when to fold them. Yeah. No one to hold them. So, all right. Let's see what happens. I have to follow it's Prusa. He knows what he's doing, right? I'll take nervous ribbon cable folding for 300, please. Never thought you'd say that tonight. Yeah. So, I'm going to plug this in. I'm going to tuck it. I'm going to do a little tuck job, out of camera angle, I guess. Nothing I can do on my end with that. Caleb does not handle tuck jobs, everybody. Moment of need is Tucker. I wonder if I'm supposed to put that cable underneath that one. Yeah. That's what it said earlier, Jim. Picture. Yeah. All right. So, we're in ish. That makes me super nervous, but I'm going to go with it. You sure you don't want to put that underneath the motor cable? Gary's not even here with us. So, I'm going to go with that right there, and then I'm going to print clips and do it the different way later. What's next? I don't like that. Y-axis motor? Yep. What time is it? We've been going for an hour. That's a question you don't want the answer to. You what? Don't ask questions. You don't want the answer to. All right. All right. Where is this bad boy going? I wish, you know what, if I can get an ender six, I will. Right now, I haven't had luck with that yet. Not luck. I mean, I started a domino effect. Okay. Which connecting the Y-axis motor, so it wants me to go round and round, gently pull it into the electronics. Don't stretch it. Connect it into the slot on the top row on the buddy board. So, you show me, okay, up in that area. Yeah. Up in that area. All right. I'm guessing the cable routing probably doesn't matter as much as it was not being pinched and it's plugged into the right spot. Yeah, yeah. I'm hoping right. So, I nailed that one. So, I put it right there in the top of the buddy board as seen on TV. You like that? Look at that. Look at that nice little tuck job. See? Caleb doesn't do tuck jobs, but I do. How's it going, everybody? It's time for a little root beer. It's a super easy printer to assemble. I'm just taking my sweet time talking about it. Just me. The one that took me a minute was this one and I filmed it. So, it took like three times longer than it normally would because I filmed it. Anything for a few extra bucks? Yeah. Hey, Shane, I appreciate the donation to the channel. I cannot say anything. I can't say anything about that. Shane recently made a very, very awesome donation to the channel. So, thank you so much. I want some root beer. Grab some. What's next? The hot bed cable. What did you say? Got it. Step 26. Step 26. Now, what? Hot bed cable. That would be this one. Also known as... There we go. Get rid of this keyboard mouse. Also known as this one. Okay. So, what are we doing with that one? We're going in there. Where do we route it? Where do we go into? Guide it into the box from the top. There's no dedicated hole. Okay. I like when that happens. Connect the individual cables to the board. So, we're going to go into this one. All right. Shoot me on the big screen there. I just saw a glitch in the matrix. So, there's a pin right here. You saw a glitch in the matrix. Weird. Well, that camera is being crazy. So, there it... I'm going to grab this camera. It goes right there to the right. Right here. So, that's where we're going to plug the big one in. Right? Okay. Nailed it. We are in. In all reality, this probably would take you 10 or 15 minutes. Yeah. We're just having fun. Where does the next one go? Right to the bottom of it? Okay. Yep. I see it. So, it goes... Let's see if I can get up in there. Right here. Right next to that cable. Yep. All right. And it goes which way? Which way? It goes in. I got to look. I'm sorry, guys. I cannot see through the camera. I'm working on that part, seeing through cameras, but if I can do that. There we go. That's a little better. This is live action here. Then it says gently push the cables inside the box and position the wrap near the top left corner where the other cables into the box. Yeah. That one glitched again. I had to figure out why it's doing that. All right. Whole stream just jumped forward a couple seconds. Whoa. We're time traveling again. Well, they don't even know that this isn't really live. We're just pretending to be live again. We just staged it with Loyal Moses. One more time. All right. So, I'm going to position these up here, right? Yeah. Basically, just kind of tuck the wires in and then get the loom up where the other loom is for when you put the camera back on. Next. We'll make sure that. Do you have the optional filament sensor or no? I do. Oh, there you go. I do have a filament sensor. I should turn this now so you guys can kind of see what's happening. There we go. Filament sensor. Okay. So, I believe we we push the open side here. This is what their filament sensor looks like. I believe we push the open side, this side into the voting tube that's there. Yes. It goes all the way up into the end there. That's what I'm going to attempt now. But Loyal Moses told me this is just for shipping. I'm supposed to cut this off. So, I'll do that. Yeah, that's what it's saying. It's saying, make sure it passes. You ain't cool. I love it. So, I'm going to loosen that up apparently because it's tight. My filament sensors are tingling. Ah, me too. We have an alligator tail on the other printer here. That's pretty awesome. What is going on? Oh, all right. I think we're all the way in, I think. Yep. And then it says, I've heard that before. Tighten the screw gently to ensure the sensor won't slide from the tube. Use a piece of filament and slide it through the filament sensor to ensure there's no deformation in the tube. In case of any resistance, release the screw slightly. So, in this slot, it's really hard to see, but you can see the tube, well, I can. And it goes all the way in and meets the other tube. So, it wants me to take a piece of filament and just make sure it's good. Yeah, you got to tighten that bolt that's on there. Okay. But make sure you don't tighten it to where, that's why you're passing the filament through, making sure that you're not squishing the the Bowden or the PTFE and causing too much resistance. We're in. Now, I'll tighten. Yeah. Lightly. Moses says, make sure it smashes the PTFE flat. Hey, cyber cafe in the house. What's up? Next weekend. Yeah, before that. Still on for tomorrow, too, for the record. We're good. What's up for tomorrow? Nice. We doing something cool tomorrow? We'll talk offline. Sorry, I shouldn't have said that out loud. What? That's fine. Sorry. This is why I'm normally in the background. I kick you my mouth. See what happens when everybody gets a Caleb? Yeah. No, that's cool. I love it. I love it. I love it. You're collabing. Okay. What's next? Do this. Step 29. Connecting the filament sensor. All right. Where does it go? Show me the money. Guide the filament sensor cable behind the extruder cable bundle and the heated bed cable bundle. Behind. Yeah, there's a there's a picture here. I don't know if slide it. Way over that way. Way over that way, huh? So on my screen, if I do this, I do this, it goes in, I believe way over on this side there. Yeah, pass it behind those other wire looms, though, is what it's saying. Okay. Between the extrusion before you plug it in. Behind. Yeah, you see the look at the picture that's up on the screen. See that nailed it. All right. I'm on it. It's behind. It's behind one of them because the other one I didn't move all the way over there yet. How about that? About them apples. And now my fat fingers. Come on. You know, it was kind of nice the other night building the the CR 30. I was filming it, which took a minute or a lot of minutes. Did you live stream that or did you film it for a video? I filmed it for a video. Okay. So that's going to be coming my way here soon. Yeah. I still have a couple of videos in the in the queue, too, that I need to edit for you this weekend. Yeah. All right, we're plugged in. All right. All right. Jim, test calls. Nice. Let's see. Blasto's with us. What's up, Blasto? I didn't even see you here. Sorry about that. All right, next, covering electronics. What is that? Just putting the cover panel back on so it says make sure the square nut is correctly positioned in the printed part. The nut cannot fall out. Okay. So I think I see it. It's in there. Yeah. Okay. It's talking about down in here, there's a square nut pushed in that printed part. Yep. That's where it's one. Okay. Cool. Then you put the put the cover back in, make sure it's properly seated in the slot. This needs to go over this way still because I was naughty and didn't move it yet. And then this goes into the slots over here. Yeah. Like that. And then it drops in. Yep. And then the second cover goes over that. And there's a picture here that shows kind of where the cables are supposed to go on the second cover. Man down. Man down. Pay attention. I almost pulled a Moses here. Come on. That was funny. Here. Let me get back here so you can see. My job is to show you good shots and not my fingers all day. Right. I've been playing with white balances during shots now. Yeah. Trying to get better at or at least ISO. Trying to get better at not blowing up my shots and blowing them out. Yeah. It's not working, but no. All right. It's been a little bit better. Oh, thank you. I think I'm in. Now I have to put that other piece in, right? Yes. Okay. It looks like the, it actually, it looks like the bigger wire loom goes in the hole on the left. Oh, I see. Yeah. The bigger wire loom goes in the one on the left. Yeah. This one right here. Yeah. I see. So swap these two. Yeah. Okay. Nailed it. Oh, now I just pulled it all out. And I don't know. It looks like it's specifying one of these is the heated bed bundle and one of them is a fillet bundle. Yes. I see. Here's heated bed. Yeah. This is filament here. Yep. All right. And this is the one that came on it. So the filament's going to go in the back like that, I think. Yep. Okay. It's like, it's like a puzzle up in this, up in this something. Which part, let me see. Okay. So flat part down. Yeah. Okay. And then that'll go around that one. Very interesting to look up at the screen and see instructions. But I like it because I don't have to look at a book and stop what I'm doing. It's different. I think we're in. My hair is telling me we're in. All right. There we go. Now, this goes here. This goes here. Practical printing is asking if you checked the power supply voltage. I don't think we've put the power supply on yet. I don't think we have to on this. It's a, I think I thought it was a box, like a separate one. Yeah, we haven't, they're having What's kind of cool and interesting at the same time is this is all printed. I mean, everything we're doing here is on like printed parts, right? And that's pretty cool. Yeah. The, I'm pretty sure the power, the power supply is a box. Yeah. Looks like I got a chat. Moses says to set it to the highest setting because we're in America. And then he says, or America. Got it. We'll do. I just want to get this in the dang thing so I can stop. Whoa. All right. Where's the other So in this case, the owner and she came with a kit much better for this. As you can see, it's working great. Actually, it is. It really is. And that went in really nicely. Everything is routed like it is in the pick. I mean, like this could be a model. Yeah. Did I put oil in it? No, not yet. I need to see that. You just said oil. I did. Yeah. Have you been practicing? Oil. Here we go with that again. All right. What's next? Three more bears. Yes. What colors? It looks like orange, but I only have two colors. So I'm going with three. I didn't. I said it. Yes. I've been practicing. I was going to try to impress you on Monday. You impressed me today. Trent, thank you, man. If you're watching, I didn't see a chat yet, but I appreciate it. Trent, a friend of ours just chatted and said, welcome to the Prusa family. Nice. Next. Spool holder parts. Lower oil. So you got your bearings, your M3s, your nuts, and your rail pieces. They're doing great, Blasto. Thank you. The little man is crawling like a crazy person. He pulls himself up all over the place. He got him a cage. I like to call it a cage. Really, it's a baby jail. It's like a big gated-in playpen. And he can pull himself up and like walk along, like scoot along it now, which is crazy to think about. Let me just turn that towards you. Let's model it while we're working on this. All right. Assembling the spool holders. I just get the pads there. I have pieces scattered upon everywhere right there. Looks like you just take two of the base parts, press the M3 nuts in. Which what are the base parts and what are the? The long black banana-shaped pieces. Unboxing be like. Thanks, Deb. Spool holders take the longest. They seem like it. I'm already exhausted. No. So take these and do the nuts go in just one of them. I mean, it's going to be two of them, right? Theoretically. Yeah. I'm assuming these are all the same. Yeah. I'm just going to go with the flow here. Yeah, it looks like it's mirrored just for... Yeah. That first one I just dropped in was super loose, but that'll be fun to hold it in. Imagine I could reprint these in any color I wanted, right? Yeah, probably. The files are out there. And the only thing, the only note here, I mean, it's pretty self-explanatory for these parts. Just screw it in and make sure the bearings still rotate freely. Don't tighten them all the way down. Yeah. It's pretty self-explanatory, except for I can't get them in. There we go. That one is super loose. This one right here, definitely super loose. All right. So I got that into that. Oh, it just popped out. Got that into that. And then I'm going to take another one. That's not... I'm pretty sure that's loose because you... That's the bolt side. I don't know if there's a difference. I think there is. Yeah. See the picture? So one side, one side takes the nut. The other side takes the screw. I see what you're saying. Yeah. So... When you flip the one side, they're mirrored of each other. So can you show me that original one again? Yeah. There you go. There you go. So it looks like this, right? Yeah. We're putting my nuts in right there. Yep. Try not to... That one will be fixed in a minute because it's not in right. Okay. Then what? Next. Put the bearings in one side. On one of them. Just on one of them. Yep. Okay. And then you then sandwich the other one on top of that. And one bolt goes in one side to the nut on the other side and then see what's going on here. Yeah. About that. So was I supposed to put the bolt in the top of the other one? Yeah. That's what it looks like. I see what's happening. I see what's happening here. So I'll put a nut in the top of this one. And I think it's... No. No dice. No dice. Like that. I see what's happening. I'm upside down like I'm drinking root beer. All right. Nailed it. Yeah. That was... That took a minute. All right. I catch you. I see what you're doing there Prusa. Trying to trick me. Not really. I don't know. I just... I'm really... This is gonna be the longest Prusa mini build ever. It's gonna be worse than Billy Rubins. First took a minute. She did a great job though. What were you saying? I'm just honestly really kind of confused as to what's going on in the chat right now. Uh-oh. What happened? Moses said that I'm off and then I'm paying off I guess and then there's like commands going on. I might be losing some nerd cred here. I don't know what these are. What time's the drawing for Caleb? I saw that. Yeah. Caleb contacted us only. I'm gonna pull these in. Yes, RC Maniac. I've gotten confused. I'm gonna seat these better by putting a... Joe brings up a good point. Billy didn't have a Caleb. She didn't have a Caleb as I throw stuff across the room. All right. So what I did was I used this bolt right here, if it would do, to pull that nut down in there and seat it better. And now I think we're gonna be better. I'm gonna do that on both here because I was having a hard time getting this in. Yes, that's what I said. Moses said the winner gets an updated Caleb so the bugs will be fixed. Thanks Moses. I appreciate it. Crazy. It's like he knows you. You got more bugs in me than a floor swamp. It's upgraded fart sounds. They're juicier. All right. Now we're getting somewhere. That took entirely too long but I'm okay with it because we're going, we're going in. So really, it's actually, this build is super easy. If I wasn't filming and talking and all that happy stuff, we would have been done a long time ago. I mean, that's the fun of it though. It's like... It is. It is. The family at this point. I agree 100%. I agree that it's fun to, it's fun to do this because I get to hang out with you guys and the chat and everybody that wants to come watch and you guys get to watch me drop stuff. You don't see that in the videos because I edit all that out normally. You edit it all out. Yeah. Well, you know, I don't but I edit it all out. Yeah. Until Caleb makes one of those videos that he puts a compilation together. No, actually, I have a different idea in my head. There's a new skill that I would like to learn this year and I think I'm going to make it a goal of learning that skill for next year's Christmas video. New skill. That's scary. That's super scary. J drops a lot. I do. I drop a lot of stuff. My wife says it's not a project until I drop some stuff. Dropping all that stuff but... So I'm just doing this. I'm going in the back to seat the, you can see that nut there. I'm doing this to seat it down in there because it was not playing nice before. So when I do that, it pulls it down into the plastic and it's hard to see but... Hey, watch it. It's a good tip. It's a good tip. I think that tip's probably in the book there because I read it or I saw it on Billy's stream. Yeah. Okay. Almost done. The last two bearings. You know, this kind of, I'm kind of having flashbacks of the rep box when I did the rep box. The rollers are kind of similar to this and it is, it takes a minute. It takes a minute to do those rollers. If you have a rep box, let me hear you, let me hear you say it. Those rollers take a minute. A hammer. That's funny. Okay, man. We have technology. What? Yeah, it was, it's a reference to SpongeBob. I'm being stupid. See, with upgraded Caleb, you get SpongeBob references. All right. I believe those are built. What's next? Oh, there's more. Yeah. Wait. All you gotta do is put the rails in. You're good. Wait, there's more. So how do these go on? Oh, I see. So it goes in like that. Yep. You got a couple of bolts that hold it in on one side. And there's some bolts that come down from the bottom. No, they go in from the top. They go in from the top. They go down to the bottom. Yeah. Yeah. That. Yeah. Doesn't look like there's holes. So they must just screw into the channels here. It's really hard to see that. That is hard to see. There we go. You can see the channels kind of. I'm going to pretend that's true and it looks like it'll slide to open and close. So I'm going to get a spool of filament here. Let's drop a spool on there and make sure it works, right? What spools do I have? Real quick. You shall not pass. All right. That one's super little. That looks about the right size. Yeah. I just want to point out that the alligator is still printing. Is that code for something? What is it? It's what I'm printing on the CR 30 of the Naomi Wills print mill. Apparently it's an alligator. I know. I was just like you're trying to like you're trying to like. The alligator flies. The alligator is still printing. All right. I am now opening the Prusa Galaxy Black Glitter because that's what we're going to print on. Thank you so much again to Loyal Moses if he's still watching. He is still watching. Thank you. Thank you so much. I really appreciate this. Not only is it going to give me some amazing prints, I hope, but hanging out with you guys tonight has been a lot of fun. Looks like we dropped like 20 viewers since like 10 minutes ago or something. It's probably because I'm talking more. I'll shut up. I'll get over it. No, it's not your fault. So I'm going to put two in to one of these. I'm guessing it's these little ones. I'm going with that. Yeah, it shows bolts on both sides. Yeah. Practical printing made a good point, though, not to tighten the one side down so you can adjust it. Will do. Caleb, did I win a Caleb 2.0? Yeah, there's something. Something's going on in the back. I think Moses is having a like a giveaway for me, I guess. Take a sniff of that for me. Prusament smells great. All right, give me a second. I'll bite. I'll do the Prusament sniff test. Cyberdeck says it smells like Joseph Prusa. Oh, boy. I met him at Murph 2018, right? 2019, 2019. My first Murph where I met you. Yeah, that was where we met. Yeah. Are you sure it was 2019? It wasn't early? We didn't have one in 2020. Yeah, it was forever ago, man. I was ready to go, too. Damn it. Hey, my neighbors are out. I hear them. They might be going somewhere. All right, hang on. Ooh, it smells like Galaxy Black Glitter. It does smell really good. I hope not to get too much into the doom and gloom of the current whatever. I just, I hope we can have some printing convention stuff here coming up. I do too. I hope that you're hanging out with everybody. I hope that end of June thing works out for Murph. I don't know if anybody saw that, but they had rescheduled Murph now till the end of June. I think it's something like the 25th or 7th or something like that. I don't know. But it's at the end of June. Been missing that midnight giant moonshine. Yeah. PLA smells like, look at this. Look at that roll. Nice. You know what? I'm going to put the screws in, but I'm not going to tighten them all the way down. So somebody recommended that I leave them loose so I can manipulate them. And I like that idea. I'm going to tighten them just enough so they're out of the way. 2021 happened. I mean, too. I hope so because I really want to get out. I want to meet more people, say hi to everybody on that. Yeah, we got to have a EdzoTech like channel fam meetup or something. Yeah, I'm big enough for that. Don't do that. Come on. We can do it. It'll be fun. Right. I'm in. Let's do it. Meet and greet with nerdy Jesus, with nerdy Jay, and Repcord. We'll get his butt out there and you. Yeah. Now we just have to figure out a way to get Geary in person. That's going to be crazy. All right. So what's next? What's next? The feet on the bottom? Yeah, just putting the pads on the bottom. Where are we padding them at? Right here. Okay. Nailed it. I'm going to actually start kicking this up a notch because I am kind of pokey here. I'm just kind of like la la la la. Blasto says you got to park pool. Yeah. Yeah. We might be able to. It depends how much crap I bring and if I bring a spool racer and stuff like that. But we're definitely spool racing. I'm going to, I got to, I got to get my hands or get my feet wet in this spool racing and Chuck has to go back after pooch, after the infamous push. This tape sucks to get on. All right. Yeah. BCK000. I don't know how to pronounce that, but said Caleb dresses Geary. I should do a Geary cosplay of some sort or just at least have Geary on a shirt or something. Dude, I should make, I should make a giant foam Geary costume. Oh, like a big mascot costume where I got about the door sideways. I have a friend. She works here in Milwaukee area for a big costume shop, a mascot place. I mean, they do all sorts of mascots and they do like Ronald McDonald and all that stuff. Spool racing. Yes. Cyberdeck Cafe. Check it out. Search spool racing in the YouTube. It's, it is, there's not really many rules except for your wheels have to be made from printer spools. The spools are the rules. Yeah. The spools is pretty much the only rules. So I'm going to come with some, I'm going to come with some heat if this happens. Chuck and I will dominate pooch this year. Oh, are you, are you doing something with Chuck practical printing? Because man, you can't team up. There's no team up. There's no teaming in spool racing that I know of. But all right. What's next? Whoa. Three more. Uh, you're supposed to eat Edutair. Remaining bears. All right. I'm sorry. Do what? The bears. That's it. What? Where? Did you pass it? The bears. Did eat the remaining? Yes. As remaining bears. I only have three left. Leave no bear behind. Okay. Done. Okay. Finalizing the assembly. Prepare the PEI and the power supply. Make sure to check the voltage on that. Remember. Yeah. And I need to put the oil in it. Yeah. Make sure it's got a good cellular connection. This is a nice spool. Power supply. Yeah. Oops. That's where you put a breaking glass sound in. Yeah. It looks like it's just plugging things in and power supply. Yeah. Power supply. Plugging it in, putting the bed on. It doesn't have an iPhone. You're right. I don't. Dang it. I might buy one just so I can play with your app though. That makes makes so much sense, but I want to do it. We know Jim isn't an Apple guy. We've seen his cable management. And I'm not dissing Jim by saying that, even though it sounded like I was. I'm a PC guy too and I'm terrible at cable management. Loving the latest update, by the way. I don't know what that means, but cool. Can there be weapons on the spool, Racer? There's no rules, man. I like it. Cannons, whatever we want. All right. What are we doing? We're plugging this. We're going to connect it. Oh, I bet James was talking about the update to the scanner app. Oh, got it. Plug it in. Plug it in. Plug it in. All right. What was the next? Just throw in the plastic off the screen if you wanted to. We've got... What do you mean if we wanted to? That is a rite of passage here. We've got to do the close up. I'm going to go from this angle. The tab is like way up in there. I'm going to even have to get that out. Oh, okay. I thought the camera froze. No, my hands might have. Hey, Phil and Lindsay in the house. How's it going? Now, here's the situation. I cannot pull that out of there. Oh, geez. You're making me nervous. This is going to go well. Do you have a pair of tweezers or something, or pliers? Tweezers. Tweezers. Yeah. Please don't close at the end enough. Look at this. I hate it when that happens. I can't. What kind of crap is this? The ironic part about this is you're going to scratch the screen, trying to get the screen protector off. Right? Well, Moses, if you're watching, does this work? Is this where I write my name here? Can't get the plastic off, zero out of 10, completely unprintable. Yeah, this is, you see the tab, right? I'm cringing so bad right now. Screwdriver. I might have to get a better needle nose. I might have to come back to the bow check of Bow Wow, because literally it's like under here and less. Hang on. Suckers. You get it? Got it. Got it. Nice. All right. Someone's like, just leave it. Get a bigger knife. It's not a knife. Here we go. Do you have any steamy music? Not on hand, no. Oh, Caleb 2.0 would. Oh, jeez. Here we go. It is off and I didn't scratch it. This isn't off. That was good. And it's not scratched. Nailed it. Get someone with nail. I need to. Sorry. What's next? Connecting the power supply. Okay. We did that. Oh, putting the PEI. Yeah. Because Moses is here, I'm going to use the textured one. Textured for his player. Yeah. I'm going to use textured for Moses. I think he was a big textured fan. I appreciate everybody who donated tonight. Thank you so much. The Superchats, the PayPal, I really do appreciate that. Every bit goes back to the channel. Where it feeds a baby, one or the other. But yeah. No, it goes back to the channel and we get to do stuff cool like Geary and Geary 2.0. I get to keep Caleb around a little longer. You know, that kind of stuff. I might get some water with my bread. So which side is up? Let's see. Print area. I think you can use both sides. I think Rocky Horror there with the satisfaction. Yeah. Well, that one's still frozen. You can use both sides, I think, man. That's awesome. So there's that side and there's that side and they're the same. Like it. Love it. Like it. So I'm going to drop that on. No, that's not how it goes on. Now I'm confused here. Let me see. There's a little screw in the back there and the notch lines up with that. The notch lines up with the screws. Okay. That's what I was looking at. I thought the screws went in the hole, but they don't. Wow. That has some serious kick to it. Yeah. Take your hands off. Good chunk. Both sides are textured. I love it. Cyberdeck, I think TH3D has that. Like Vlaso said. Texture doesn't play. What? This texture doesn't play good with PLA? Oh, I love texture. We're going to try it anyway, Greg. Don't pinch yourself. I'm going to try it. I trust Greg because he prints with these a lot, but I really would like to try it. I think what I'm trying to say is I'm doing it anyway. But Greg knows better. What was this to say in texture is fine. We're going with it. We'll just be like a hundred on the bed. I hear if you spread a very thin layer of superglue on the bed surface before you. Yes. Purple glue. Yeah. Yeah. Good squish down some purple glue. Too good. Too good. There is a note here. Make sure to check for the latest firmware. I think it's on the SD card, I thought. No? Insert the bundled USB drive and the printer. Calibrate the printer. Gorilla Glue works with PLA. I like it. It's great for your hair, too. Yeah. That's what I use. You can tell my hair hasn't moved all day. Except for this piece that's just crazy right now, apparently. All right. We have wiped down with PLA of PLA. A thin layer of mayonnaise helps blast us. Yeah. That sounds disgusting. Hot mayonnaise. Gross. Get out of here with your hot mayonnaise idea. Here. Look at that. We got a tail, baby. All right. We're back. Hot mayonnaise. Yeah. We'll just throw it on there. It gets that squish. The crunch. It's all about the crunch. All right. What's next? That was it. It just said check firmware. So put this in? Yeah. I plug it in. I put the USB drive in, I think. Yeah. Check for the latest firmware. You can do so at the website or insert the bundled USB drive into the printer. Detailed instructions are in the handbook. So what? So insert the USB drive and it says if the USB drive includes a newer firmware than what's already installed, you'll be prompted to install the new firmware when the printer boots up. Nice. All right. Here we go. This thing going to work because I can't see the screen, right? We'll figure it out. I got to get a print going at least before we go. I don't know what time it is. 11 o'clock. Moses. He said it makes him so happy. He's glad it arrived. He's excited to see what you create. Oh, and thank you. Thank you, Moses. Thank you. Thank you so much. We really appreciate that and by we, I mean me. Well, I really appreciate it too. You guys are like being a part of this channel and this community has been so much freaking fun. I just absolutely love it. It is. It is a blast. The whole community is, you know, it's almost all amazing and I feel like I'm making friends, man. I am making friends. Look, I met you at Murph. Yeah. Moses, come to the next live event, Murph or whatever it's going to be an IOU, a drink, a cold one or like 17 or maybe 50. I'm not sure yet. I'm looking forward to hopefully meeting a bunch of people. I see commenting on your videos and in the live streams and stuff like that in person someday. All right. I'm turning this bad boy on and praying. Did you put the USB drive on? USB is on. I should have put the thing over here so you guys can see it. I don't think we need the instructions anymore. Do we? I hope not. Whoa. Whoa. What just happened? What do you mean what just happened? Oh, I see. I hit a button and a tab popped up on my thing took it took over like the screen. Oh, and I was like, what did I touch? I'm just I'm excited. I'm so pumped to hit this to get this thing printing. So it's asking me currently. What do I want? I'm going to do English. Yeah. Welcome to the Prusa Mini. Would you like to continue? Yes. Set up wizard. The setup wizard. Okay. And the status. Let's see. I'm going to have to I'm going to come around the other side. I can't read it from behind. Why didn't you? So there's noises coming from the bathroom. What? I hope they have one walkie maker for you. Give me two. All right. I'm here. All right. Here we go. Did you guys hear me? Yes. So that as far as at the bottom of the screen, it contains information. Press next to run the self test. It is running the self test. I like that it has a built-in self test. Yeah, that's awesome. We need to get one of those for Geary. I wish you know what I should be doing. I should probably be showing the whole thing happen, but it's it's basically homing. We have movement and all that stuff here. It's doing things. The stuff and the things. Oh, now it's coming down. Yes. Cyberdeck. Yeah, it's a long way. It's a long way to Murph. I went to I went to IRF and that's on the east coast and that was a lot of fun too. Flashing red light on the the bed heater. He says send it back to Prusa. Yep. Oh, maybe I forgot to cut this one, right? I didn't cut that off yet. Yeah. Yeah. Don't do that if you're watching and don't know the context. This thing is super quiet. Damn. Checking the hot end heater. Nice. This is awesome. So it's still checking things. See? Oh, it's flashing. Oh my gosh. It's flashing. Yeah. I forgot to cut that off. That's why. Hang on. Got it. I have finished my root beer folks. What do you guys drink? Are you still drinking anything out there? If you are, let me know because my root beer is empty. Just throw that anywhere. I did. Well, you don't even want it. I got so many boxes over here from the last few printers because I haven't got I haven't got to the dump and I can't break them down small enough to put them in our recycling. I think Joe asked me if I got anything to print off of one of the printers I did recently. I think he's talking about the foreign one. The Toy DIY 2, I believe. And yes, I did. It is printing now. It is printing now. I thought, you know what? I think I forgot to post it. Dang it. What I did. I really pumped that we have at least a tail, the beginning of a tail of this alligator over here. Switch to rum and coke, gin and tonic. Oh, what are we doing? It says done. All tests successful. Now, let me go back. Bam. Now it says first layer calibration currently with currently loaded filament pressed next to load filament and then pressed load to change filament and unload. So we need to load filament on next, right? We're going to do PLA. Did you see that? It gave us a list of the materials to heat up at, which is awesome. Now it's calibrate at the distance. I think it's got to heat up here and I got to put some filament in this bad boy. Hey, first layer Caleb. It was short for calibration. It said Caleb, but I was like, hey, first layer Caleb. Nice. So let me get my, you know what's interesting? I'm looking at this brand new spool and it has the end of it is actually cut in a. Uncle Jesse, how you doing? The end of it's actually cut in in a angle already to push up into the thing. I almost got it there. We've been, the chat will tell you that I've been milking it. It's 10. We're messing around. Happy birthday, by the way. Yeah. Under not over. Whose birthday is it? Oh, gotcha. I think he was actually being serious on that one, right? Under not over. Yeah. I think it's Uncle Jesse's birthday. Well, sweet. Happy birthday, man. Yeah. I will, I will take this loyal advice because I think he's being serious under not over. That makes more sense. I like that better. So, so the question is I just push it up in there, right? 42. What? Yeah. Yeah. Yeah. Let me hit next. Well, how do I, it's not, it's not doing anything. It's not pulling it in or anything. It is heated up 215 and 60. Oh, I see. Once the printer starts extruding plastic, adjust the nozzle height by tuning or turning the knob. All right, good. But how about we suck the filament in? Isn't it supposed to like pull it through and all that? I know you guys have these under not over. So, so Uncle Jesse, our friend, Lil Moses has been telling me some really great tips tonight. He made sure I cut the extra Bowdoin tube off up here. The wires that came here, don't need them. Cut those off, you know. The ribbon cable. In 100% seriousness, am I supposed to push this filament in through the orange extruder in the back here or will it pull it out? Greg Gustam says you're going to have to restart because you didn't select load. Oh, so how do I turn it off or something? Or what? I don't, I can't, I don't know if that's legit or not. It's everybody's been messing with me. I think he's right because I didn't. I'm going to shut it off. David Stock, David Stockdale says hit the button again. It will load and then Moses says start loading over again if it didn't push it until it catches on the load. Oops. Push it. I don't think I loaded it. So, so let's go through. Yes. Going through the wizard. Ah, I went back. So it was my fault. I, I said next not load. That was my bad. I see it now. I saw the string. Right, right, XBA select start. Yeah, you got it. Serious, no joke. Press the X button. This is like, uh, this is like, uh, that Twitch streamer that had a, had their Twitch stream chat, like play Pokemon for them or whatever it is, like by entering commands. Let's see. Press, press continue. Loading filament. Ah, it is officially loading now. Whoo-hoo-hoo. Look at that spool. Yeah. Uh, you know, how do you feel about the Neptune? Uh, yeah, how do you feel about the Neptune? We'll say that. Looks like a pretty nice little machine. Do you feel that way? I mean, I have one right there. It's, it's still in a box. It's still in a box. Um, because I had this one and I had that one. We're printing an alligator here. Love, they love, love, love the Neptune. Now I'm going to have to get it out and build it. All right. Is the color correct? No. RC Maniac says the bottom left of the screen is an X button to kill any action. I saw a little cut out on the bottom left. Is that what that is? It's a kill button. Oh, sweet. Yeah, that's awesome. Yeah. Here. Yeah. That's cool. I didn't know that. We're in on. Whoa. Getting as good if not better than my mini off of it. Holy, someone asked you if he's on laughing gas, but hey, you never know, man. I'm going to have to start it up now. So I'm going to say yes. First layer calibration. Sure. All right. We're doing a thing. We're doing a thing now. Z is reboot. X button is reboot. Okay. Yeah, the X button is like rebooting. So don't click it right now. We were just... We have literally learned something tonight. Uncle Jesse said he had no idea that's what that button did. We had it neither. You know, it would probably be good if I went through this, but I had a Caleb with me tonight and we just pulled up the instructions on the screen quick so everybody could see them and he didn't pay attention to what the X button is. All right. What do we got here? Just making sure. Ethan's dad, thank you so much for retweeting. David Stockdale says, get ready to scroll the wheel to lower the Z during print. It's probably like baby stepping probably. Ready to study the Prusa Bible. Yes. Disable Caleb. What? No. He's doing the chat commands. Tim was playing with his little cube. T-H-T-D was playing with his little cube doing chat commands the other day. All right. So am I going to go turning the knob until the filament sticks to the sheet? Which way am I going to turn it counterclockwise or clockwise? How about that? There's a question. Here. It's probing currently. Cool. I'm going to walk around the other side so I can see this. Crap. I think you guys disabled Caleb. What? No, I'm here. It was all this disabled Caleb talk. I thought they gave you away. Yeah. All right. And 100% seriousness is left down and right is up like anything else left down right up. Yeah. Moses said you'll be scrolling down or you'll be scrolling it a lot but nobody really said whether you need to scroll it right or left. Okay. Or clockwise or counterclockwise. I mean, we'll find out in a second, huh? Yeah. Looks like you're going to need to go down quite a bit. It is. Yeah. I'm going to have to go way down. It's not that way. Come on. Practical printing says counterclockwise is down. Yeah. What do I got to do? Scroll for 40 hours here? Yeah. Moses said you'll be scrolling to like negative 1800. Really? More, more, more. Everybody's saying faster, more. I mean, I'm at negative 18 now. Uncle Jesse said he's also at around negative 1200 to negative 1400. I'm at 1830 negative and still not sticking. I'm at max negative 2000. And now we have a great custom wins. Let's see. Let's see how this layer looks. Moses says only noobs don't get it on the first try. That's it. I'm sending it back. Purple glue. Purple glue. That sheet hates PLA, someone else said. All right. I will bite and put the other sheet on. But I'm at negative 2000. Yeah. I don't think it's a sticking problem. I think it's just not, it's not close enough to the bed. Well, I mean. Oh, maybe it is. I don't know. Look at that. I can't really get a great. It's blurry. Everybody's saying no bueno, huh? Oh yeah, look at that. Yeah, it's not good for PLA. Do you want to repeat the last step and readjust the distance? Well, I can't go down any further. So there's that. Sure. Where do you see repeat the last step and readjust the distance? Oh, sorry. It was right there. Oh, gotcha. Now it's asking me to clean the sheet. I am going to bite and I'm going to put the other sheet on. Officially going to put the the other one. Yeah. Someone's saying really run it through the dishwasher. What? May have to adjust the Super Pinda. Yeah. Seen multiple. I think that's the second time I've seen that comment. Yeah. I don't know what the Super Pinda is though. That's the filament or the I'm sorry the level sensor. Oh, gotcha. Gotcha. I'm currently not showing you what I'm doing because I forgot to switch to camera angle. I'm just cleaning this one quick. Loyal says go with smooth if you like so you have his blessing. I was just about to get out the purple glue. So I might have to adjust the the sensor it looks like, huh? And I probably will have to learn how to do that, right? Okay, next. I'll see if I can figure that out on the side here. Let's see what happens. I'm at negative 2,000. Look. I don't know if you can see it. It's over 9,000. Yeah, negative 2,000. We'll try it this way. Someone's trying to get me to say oil again. Yeah, I saw that man. I use glue sticks on my bed for my many people in the video comment hated that but whatever works. Yeah, man. I mean, if you print some prints, maybe raise it up with different with a with a different sheet first. Oh, good point. I don't think I can until it goes. So once it starts doing its thing, I'll I'll raise it somehow. Yeah, nylon nozzle on the bed and a zip tie under the superpinda probe. New sheet equals your first labor calibration. Got it. Zip tie under the probe. Why would you? I think it's it goes down and it what it does it gives you the space between the probe and the bed. Oh, we should still give Mayo a try. Yeah, Mayo Mayo sounds not good. Still just want to throw it out there. Warm Mayo printing in warm Mayo call up Andrew sink. He might try that's what I was going to say. We need to get his his plunger tool head on there. But I see what you're saying. I see what they're saying. Maybe the maybe the peanut needs to come down a little bit so it so it probes a little closer. Yeah, I'm looking at the I'm looking at the Prusa mini handbook and I'm not really seeing anything mentioning there's definitely new firmware. Yeah, there's a new firmware. Should I stop this or what? Well, so the assembly guide said that if you put the USB drive in before you turn the printer on if it has new firmware on it, it'll it'll prompt you. Well, and maybe they didn't ship it with. Wow, damn. Is there a way to look at what firmware is currently on there? Maybe give me a second. Okay, I do this from behind. According to this, according to the Prusa website, firmware 3.9.3 was released on January 7, 2021. So Son of a gun. I'm at 1885 and practical printing says there's new firmware as of last week. What are you a practical printing? Where do you have where have you seen that at? Because I'm seeing January 7 is the most recent filament or most recent firmware. I can look if I open if I open my Prusa slicer it might yell at me or 431 I'll go check it. I'll go check it. Yeah, go to the new 3.9.3 is that nope. Okay. Nope. I'm an idiot. I needed to scroll down. Sorry. Yeah, 431. I'm getting good layers on this sheet. Why didn't you tell me Lowe Moses to go with this sheet first? I'm going to get roasted in the comments. All I had to do is scroll to see the see the new firmware right underneath the break in the page. No, I had to give him a hard time. All right, 431 February 15th. I'll have to go download it and get it on there. No big deal. I got it here. Do you want me to send it to you in the chat or are you just going to do it later? I'm going to do it later. Okay. It's I mean, I should I imagine it's just throwing it on the SD card and yeah. Dan sent the link in the chat in the public chat too. So did you break Caleb? Yeah, he did. Look at this. Not close enough yet, but it's definitely better. So there's a new firmware. We'll check that out. That's awesome. I definitely probably I need to probably adjust the the pinda link to the firmware. We got that coming. So let me go see what this is on it. Let's see. Go back and go to info. So this is on 421. So you're probably right. Oh, David also says, hold the knob down when you turn it on to load the new firmware. Okay. I'm I really am broken. I can't talk either apparently. Adjust the pinda quick. It's easy. Okay. Famous last word. So I take a zip tie. Then what? Does it say in the book or something? I didn't see it in the book. I was looking at the book and I didn't see it. Greg, how do you do it? I imagine you just turn it. I'm going to take a wild guess and assume you loosen the screw and then use the zip tie as a space around the bed to between the right and the bed and then tighten the screw back down. Put paper under the nozzle. Drop it down one thread. Drop it down one thread. It'll be fine. Okay. Put paper under the nozzle. Try and tell you do a math. Make a Viking in the house. So that's serious. Marcus says I have it right. Somebody likes me. Do what he said. Caleb is right. All right. Caleb. Oh, God. Now we're in trouble. They said you were right. Oh, I see that. I see the screw. So you loosen the screw. Use this as a spacer. Basically lower the sensor down to the zip tie against the bed and then tighten it back up. Should I, I'm assuming this all can slide. Should I move it with the control panel or should I? I would cut power. Hey, look at that. Yeah. Just move the right thing and you're good. This is all, this Prusa thing. It's fancy. All right. I like it. And then I take this here zip tie. I think they were saying, yeah, okay, you got the paper underneath there. Paper underneath. Zip ties down. Bringing it down. So I bring it down till it rests on the zip tie, right? I guess so, yeah. Tip of the zip tie, not the center is what Dan is saying. Tip of the zip tie, not the center. So then, so I loosen the screw. Let's see. Loosen the push. Okay. Go back up. I need this. What am I telling you to do that? Yeah, I can't scroll on your screen, dude. Yeah. I'm like, scroll up. Yeah, yeah. Move the nozzle to the bed. Loosen the screw. Move the pin to till it hits the zip tie. Nailed it. All right. Nozzle on the bed. Check. I mean, the pin is touching the zip tie. I mean, I might be able to come down here, but it's not going to be much. It might already be fine, then. Could just be the firmware update that you need. It's not going to be much if it does. Power's definitely off, yes. I mean, I can barely, let's see if I can show this. It's going to be hard to see it, but the zip tie tip here. Yeah. I mean, it's tight under there already. What do you suggest, y'all? Smaller zip tie? Just a little baby one, because, yeah, I have the nozzle pretty much on the bed right there, and then zip tie. I don't know what happened in the chat, but zip tie is, you know. Yeah. Gamer260 says the new firmware update has improvements to the first layer calibration wizard, so. Oh, let's see. Is there a gap between the nozzle and the heater block? What do you mean? Let's see. I think he's suggesting or implying that maybe the hot end is loose. I doubt that's the case, though, from the factory. Yeah, I don't know. I wonder, here, I got an idea. Let's pop this bad boy in the computer. Let's go see what's on said device. Too many cooks in the kitchen. I'm staying quiet. Nice. I like it. I like to help, especially on a printer that I don't know anything about that you guys do. Yeah, 421 is the firmware that's on here on the card, so I'm going to delete. Actually, I'm not going to delete it. I'm going to, I'm just going to copy it off because I like to save the contents, usually. I'm sending you the 4.3.1 download link in the background chat. Cool. On it. Just finished playing Warzone with WarCocky, Grubby, and Richard. Nice. That sounds like a blast, and I feel like I'm as toys. Extracting now, extractillation, copying, pasting, check, check, and check, ejecting. I like the step-by-step commentary. Do you like that? Yeah. Yeah, I used to make videos. I used to. Now I just go live and people shout at me to do things right because I suck. All right. Maybe try again from the zero on first layer with a new firmware. Something seems buggy. Okay. So when I turn this on, I hold the button in, right? That's what it sounds like. Yeah. Hold that down and turn it on. It sounds like. Oh, yeah. Look at that. Look at that. Flash the new firmware. Yeah, I would. Flashing. And I will redo the first stuff. So should I fire up a stream after this? That's funny. I am going to go to bed soon. 11.30. Yeah. Time flies when you're having fun, my friend. It does. I got to be up early with the little man. Redo the whole wizard. Yep, that sounds good. How do I do that? Info? Hey, we got version info. 431. We're good. Sweet. Let's see if I can redo the wizard. Config menu. David says it's in the config menu. Factory reset? Probably not. No. Calibration menu. Oh, let me go back. Calibration menu. I guess that makes sense, doesn't it? Oh, wizard. Would you like to set up? Yes. Okay. We're going through the checks. I want to pull that paper out. What? I might want to pull the paper out, yeah. Yeah, I should do that. Factory reset is fine too. We'll pull the paper out. We're doing it. And I have the smooth sheet on this time. No. Factory reset will clear the e-prom. Gotcha. Well, I'm redoing the wizard apparently. Someone mentioned that. So we're doing it. I need some water. Whoa. Listen, folks. I said folks, we're going in. Now this, this is, you know, that is up close and personal. Hey, 3D Wildcat, we did check the zip tie thing at the end of the zip tie. And the zip tie was, I mean, it was already the right, the pendant was already the right height. So. Yeah. I tried that. We'll see what happens on this one. It's doing its checks, checks and balances right now. And as soon as it's done, we'll see what happens. It's a pretty cool little printer. Yeah, I like it so far. Look at that one. It's printing diagonally. Pretty epic. Yeah. Hello, Batman. I'm Batman. You know, people were, people were commenting like, Oh, when are you going to use a mini for it? So small. It's not, I mean, it is small, but it doesn't look that small. Yeah. It doesn't look small enough that I would be questioning what I would do with it. You know, like I, I could find some uses for that. It's not like peony weeding, you know? I agree. It's a nice surprise. We're almost down to Z. Okay. It's stopped right there. Make your Viking. Have a good night. Hey, have a great one. I'm heading to bed. Thomas, have a great night. It is late or early in your neck of the woods. So that's probably a great idea. He said he was going around for a while, but he's just going to bed. Are you just going to lay in bed with us? Yeah. He's taking us to bed with him. Oh, come on, man. You got to buy me dinner first. So it's still doing self testing. It's just heating everything up right now. Yeah, it looks like Dan is on his way out too. Dan's out. Have a good night, Dan. Thank you so much for swinging by. I appreciate it. This has been a fun long one. Yeah. Yeah. Don't be hard to get Caleb. Look, just a bag of Haribo gummy bears and a USB drive that has my new firmware update, and I'll be good. So it's heating currently. It's going through the heat checks. Oh, heatwave. Blasto's heading out too. Blasto, have a great night. Later. It's good to see you around, and we will see you next weekend, I think. Next weekend. Don't do that. I know. I'm digging this tail I got over here. That's only taken three hours and 23 minutes, you know. The tail cam. All right. We're good. Next. Calibrate. Great. Okay. Next, next, next. You want to use the current value? No. We'll start over, right? Okay. We're starting over. I'm going to bring this back over here for you guys. We're going to watch it happen in live time, maybe. Boom, Chakalaka. Sweet bee. Die hard. We're still here. Yippee-ki-yay. I work at seven, yeah. I probably got to be up about 530 with a little man. And then tomorrow, I actually have to do a photo booth event for a baby shower. So there's that. Nice. So it's, yeah, we're a friend. I'm going to go run some photo booth pictures for like 20 people. All right. We're rocking. Can you see it? Yeah. We are rocking. I'm ready to dial her in. Someone said be ready to spin this baby, huh? We got about 50. A lot. Less than 15. We're almost, we're almost to 10. We're almost there. All right, here we go. RC Maniac 25 asks, what is the op that is? And mobility today, no. He didn't build the entire mini. It was a partially assembled one. Don't let that two and a half hour time on the video fool you. It was partially assembled before we started. He said the bed is way too high. Yes, that's what we're working on. It's looking, it's actually, it's not looking too bad now. That's looking good. That's a pretty nice noodle. And I'm only at 1713. Try to get a little more squish in there. So it definitely changed how it broke. Do you see that it starts from the front this time? Yeah. So that first squiggly string looks like an old phone cord. Yeah. It's not coming off. Said take a look at the box at the end to see. Box is almost done. That's not bad. I'm checking right now. Mobility said there's a photo in the manual to match it to. I think I found it. Hang on. I'm pretty psyched as well. It's down there. All right. You might have to blow that bad boy up because I can't see. Yeah. I'm getting there. Oh, hang on. I need to make, I'm going to go full screen here. Yeah. I think I need to zoom in too. Sorry. I'm trying to get it lined up. Well, whatever. That's good. I don't think that's too bad. I think I think that's, it's much better than it was. And when I pull it off, I probably need a hair more squished because it's not exactly all melted together, but it's not fanning out. It's not doing the crazy thing the other one did. Practical printing is gotta run as battery's dying. Oh, no. Not the battery. All right. Have a great one. Thank you so much for coming. Thanks everybody for sticking around too and hanging out. It's been fun. Right. Right. Thank you. Let's see. You want to, you want to repeat? Sure. We'll repeat. Pete and repeat. We were one more time. Said it was too high. $5 because you got me to 3D printing and I got my new MK3S Plus. Thank you. I hope you love the MK3S Plus. Let's go. We're going to do this one more time. He also said best channel to learn. Thank you. Kind words. Thank you. Thank you. Thank you. Yeah. Very much. I'm boxing the laser printer right now. Laser printer. I don't know what the two checks look like or what they're trying to show me, but I'll believe it. I think what it's saying is making sure that the lines are straight. If the lines are wobbly, then it's definitely too high. Show. It's a sweet book. BCK-TRIPLE-O makes a good comment. It's Billy. Billy has a pretty good filament, first layer squish. Yeah. Her stuff is awesome. She makes some really cool guides. Your first one got me hooked on the Ender 3 V2. Two weeks later, I bought a 1K Pruse. I figured out the Z-Hite using a flashlight. It's hard to explain. All right. I feel like most times when somebody says something and follows it up with, it's hard to explain. It needs more explanation. I'm pumped about that. Hopefully I got enough. Yeah, I should have enough filament, I hope. We are back here. Three hours and 31 minutes in and not touching this. I mean, it's barely past where, yeah. I like it. It's looking good. It is looking good here. Let's see. Look at that. Jim, do you have any experience with the palette or the palette too? Don't. No, no. I think they'd be awesome. I think they take a little while to learn from what I've heard. I think that I have a lot of fun with them once they're set up, once it's all set up, because I see the stuff that filament frenzy is doing on his MMU and stuff. Beautiful stuff. Amazing stuff. Yeah. Absolutely gorgeous stuff. I think there's quite a bit of a learning curve. Getting it working quite right, though. I messed with the palette a little bit for a little while, but I didn't spend enough time with it, I don't think. Got it. I didn't ever play with one yet. Maybe I should get one on the channel. I should. Yeah. That's looking much better. I brought it down a little bit, looking much, much better. So what I might do is take off pretty soon, but I'll start a print. I might set up a camera here and do a time lapse. Why not? Come on, Mosaic. Let's get Jim a review unit. I like it. I would take a little bit to dial in, but I would do it. It would be fun. Oh, yeah. That's better. I mean, I still got a little bit of gapage in there, but it's getting better. I say we start a print and we see what happens. You're going to want to silicone suck that hot end. Facebook group has a dude. You can print the mold and make one of yourself. Leave the stream running all night. Just let it fly. Let it fly. All right. I'm going to tell it. I don't want to do it again. Congratulations. Return. Let's start something. What do you got? A screw, a whistle. Let's chat, man. Chat. What do you want the first print to be? What should I print? Let me go over here. I'll show you what's on the screen. So we have a screw. Let's see. A nut, a screw, a whistle, a benchy sheep, a buddy, a prusa, a tree frog, and that's it. What do you guys want to see? Calibration cube, prusa logo. What is buddy? I don't know. I don't know either. The nuts, a whistle. I think everybody's just saying everything. Yeah. I haven't seen like a overall winning. I've seen a couple sheep and a couple whistle. The whistle is fast, huh? The logo's a good start. Someone said that they said the whistle's fast. Yeah. Oh, buddy is just a prusa's dog. Oh, huh. And prusa, is this the, this must be the, uh... That's got to be the logo, probably. Prusa logo's fast, benchy whistle. Moses is spamming nut. Someone's spamming... Moses is, yeah. He's hitting the nut. He wants to see the nuts. Well, I tell you what, I'm probably not going to hang out for the whole thing, but because Moses bought this thing, we're going to do a nut. All right. It did have a time. I should have paid attention to what it said. It's not prusa, anyway. So, I'll get it flying here. Let me grab my, uh, I'm going to plug a wise cam in. Got him. Maybe. These nuts. I like my nuts. Hey, somebody, hang on. I'll, I'll, I'll approve that. I got it. There we go. Oh, you got it? Okay. Yeah. That's funny. Tim Jackson, these nuts. Ha! Got him. Got him. Got my wise cam three. I'll probably just use this. I don't know, uh... Oh, yeah. I'm pretty sure that's the same camera that I've had sitting in my Amazon cart for, like, four months. Yeah. Yeah. I think it's the same one. They're awesome. I love wise cams. Sweet. Well, I don't know if they're great. I'll pull the trigger on that, then. I don't know if they're great for, uh, time-lapsing, um, not, not made to the best, but, um, it works. Well, they do, uh, they do 1080p, don't they? Yeah. Yeah. So, I mean, they're okay. They're okay. What I need is something to raise it up. So, I'm going to cheat and use a prusa box. As soon as it's, uh, uh, turned on here. I'll load. Sorry about that. I can't believe you. Oh, I love it. So, let me go to wise, test bench. So, it's doing a line currently. Time-lapse. Time-lapse. Sure. I don't know how long this is going to take. So, we're going for it. All right. Time-lapse is set. I'm going to adjust. Probably is not going to go well if I move that during a time-lapse, huh? The nut is printing. It's looking great. It's printing and took entirely too long, but we had fun. We milked it a little bit. Right? Yeah. I think it was fun. It was fun. Yeah. It was fun. What is, uh, what is Kobe lax? Uh, here's a DJ on Twitch that's doing a stream right now. Oh, yeah. All right. Well, we have a printing printer. Thanks to, uh, man, that looks nice. Whoo. That looks nice. We have a printing printer. We took us a minute to get here, but we had fun with it. Literally, if you were doing this at home yourself without a camera audience, you're probably only going to do like 20 minutes, maybe 30 very tops of putting it together before you got to this point. We have a little fun. We chat. We talk. We have fun with it. So, it took a lot longer. Yeah. Loyal got us all hooked on them on Twitch. Nice. I'm so excited. Me too. I am. I'm so excited. Thank you so much, Loyal Moses. We, I really, really do appreciate this. I am super stoked because this is the machine I'm going to take with me. It's going to sit on my desk, uh, at work and I'm going to make a lot of cool stuff there and, and until the, uh, bosses come and say I have to take it away. But, um, I got the okay to put it back for now. So I'm doing it or put one back because I had one there before. So I'm going to do it. We're going to have a lot of fun with that. Print to handle for it. I should definitely do that. Also, cyberdeck cafe shameless plug. We will see you at VertCon next week. I will be there. I don't remember if I have a time yet. Let me know. I can't remember. Joe, if I have a time, let me know and I'll start talking to people about that. I can't remember. Maybe I missed the, uh, missed the memo on that one. I'm not sure. But, uh, I know it's going to be a lot of fun. We're going to hang out all day next week and, uh, it is next Saturday. Jim, are you all right with me, uh, dropping a link to that, the VertCon in the chat here? Yeah, do it. Okay. Um, let me, uh, minimize that. Yeah, we're going to drop a VertCon link in the chat. It's like, uh, there we go. Perfect. So, go check that out. Um, come hang out with us next week. We'll be back here Monday, uh, for HotMakes. Don't forget Monday for HotMakes. We're going to do that. And this thing is cooking, by the way. It's fast. That's a big nut. That is a big nut. Interesting. A couple of funky, funky lines in there, but we're going to let it fly and see what happens. You'll have to, uh, you'll have to post a picture of the final product on Twitter later. I will. Uh, what I'll do is I'll post the final product along with, um, if I can, I'll post the time lapse too. We'll have some fun with that and make sure everybody can see that. When is the Caleb giving a giveaway? I can't afford to give him away right now. Um, so, uh, it's never, but if you need a Caleb, we can hook you up with a Caleb. Uh, spin the wheel for Caleb. When Jim, you know, I mean, you're gonna get Caleb 2.0. What was that? I was saying, when you get Caleb 2.0, we'll, we'll give away the old one. Yeah. Well, this is like, uh, like speed dating here. Blind date, blind date, yeah. Um, but yeah, this thing is rocking and rolling. It's, it's printing the nut currently. Um, I'll have to check it out. There's a couple of little funky lines in here, but I don't know if that was the first, like the first layer or what I can't see. Um, it's never. Yeah. So, so yeah, uh, we will see you Monday for hot makes right here on the edge of tech. 6 p.m. central. Uh, yeah, at 4 p.m. west, 7 p.m. east and all that stuff. Um, thank you. Thank you guys for hanging out. We're about to leave. That's funny. We are. We are, but, but thank you guys for hanging out. It's been about three hours. Uh, hell of a stream. Some great donations in there. Thank you guys so much for all the donations. I appreciate them on, uh, super chats. I appreciate them on, um, PayPal. Thank you guys so much. Sweet B. Have a great night. Thank you. Loyal Moses. Have a great weekend. You too. And thank you so much for this. I am so excited to play with this. I use Prusa Slicer and I have for quite a long time and I cannot wait to use this with Prusa Slicer because that's what it's all about, like incorporating it all together. So I'm so excited. Um, but I'm going to get flying. I'm going to get to bed before the baby wakes up and I have to take care of him and, uh, because I told Lindsay I would, but everybody have a great night. Have a great weekend. If it's day, have a great day of night. Have a great night. Uh, either way, have a great weekend. We shall see you guys coming up soon on Monday for Hot Makes. Again, loyal. Thank you. Thank you. Thank you. Go check out the, uh, DJ guy on, um, Twitch or whatever. Uh, I can't remember who they, I think it was on Twitch. Yeah, it was on Twitch. We learned all the things. Uncle Jesse stopped by. We learned what that reset button was. Uh, well, we, we all learned that and, and he didn't even know that, which is awesome. He said that he's really loving his Elegoo Neptune 2. So I'm going to have to build that now. It's sitting right over here. I had an Ender 3 Max that's sitting right here that I need to build and, uh, a lot of videos to do. So these, this one right here, I was one of my, like, I was pumped to do this one. This one had to come first, no matter what. The one behind me, I'm super excited for two with that CR 30, but this one means a lot to me and I can't wait to print every day with this. So you guys have a great night. Caleb, thank you for hanging out all night. Yeah. Thanks for, uh, thanks for letting me join. I had fun. Yeah. I had a lot of fun as well and it's always good when you're around and, and everybody else in the chat, I'm glad you guys had fun with Caleb too, because Caleb's a blast. So reach out to Caleb, find on the Twitter's CD Ferris, right? Yeah, Ferris, like the wheel. I was way off. You can find him on the Twitter's and, uh, yeah, we'll show you what loyal Moses is not looks like in the morning. So stay tuned for loyal Moses is not in the morning. Good. Good night, guys. Thank you so much again. You guys rock. Uh, and as always, like I say, keep printing. Later, everybody. Later. Bye. Yeah, I'll end it. Okay. I wanted to make, I wanted to actually see if that posted. It did. Yes. I love automation. Automation. Bye, guys. Have a good night.