 Γεια σας και καθώς! Είμαι Vicky εδώ με την ευκολή μου, ΚREAT8! Σήμερα θα θα συμμετωρώω 8 καταλήχα με τα προστάσματα από τα τελευταία εργασία με τα μου πιο καταλήχα. Τα τέταυτα μου πιο καταλήχα είναι στον σχέδιο στις τώρα, δηλαδή να δείξω το βιβλό μου για να βρεις το κουπονκόδο και πού μπορείτε να πείτε. Λοιπόν, ας ξεκινήσουμε με την πρώτη καταλήχα που έχω κομπιέσει 2 δισετές από τα τελευταία εργασία. Είχω χρησιμοποιηθέσει την πρώτη καταλήχα για να κομπιέσει το κουπονκόδο που βοηξαίνετε εδώ, δφ. σåt τα πρώτη καταλήχα. Είχω χρησιμοποιηθεί η πρώτη καταλήχα για να κομπιέσει όλα τα看看 κδように να βρεις πρώτη. Πωρώτη να σκορταθώ το στις τώρα και αυτό θα σας πω στο σανή να πω. Έχει διακύθει από ένα του ένας ταυτότητας της σανη, από το στις τώρα, ότι το καταλήθηξα να εμπ sesame kia. Είναι αξιωτικό στουτική εμπραστάσσεις και είναι τραγισμένο με μικρή 100 ευρώπης που μπορείς να χρησιμοποιήσεις στους ασχεδές για πριν ποτέ κι άλλα καρδιά και εγγραφή. Είμαι εποχημένος θερμητικός και θερμητικός στουλ και εγγραφή και θα το χρειαζω. Και θα είμαι για μια εξαγερή καρδιά, θα πω το πλαστοπίδι που εινέχει να χρησιμοποιήσεις με αυτόν το κομμάτι στο τελείο και θα εξωτημένουν 4 δυρκές κομπαρτμές, οπότε όλοι και όλοι μπορούν να είναι πλήρες με δυρκές κομπαρτμές. Τώρα, αυτό βρει ως ένα βιντεί, όπως μπορείς να δείτε, αλλά είναι αξιόλυση να είναι ένα σύντρο. Λοιπόν, έχεις 2 για το πίσω του 1. Τώρα θα σκοτήσω το πίευμα στο πίευμα και έχω κομπαρτμότητα τύπο το πίευμα, όπως τα πίευμα από το κόμπι, και θα πιέξω να κομπαρτήσω όλα τα πιεύματα πολύ μονοκροματικά, έχω μυαλό και γνωλό στον κανό μου. Now I'm going to put together the bow and I'm using my bone folder to add some curve on the bow. I used a piece of double-sided tape at the back and now I'm going to fold both ends and I love that this tie actually gives you two different sizes of bows. I am actually using the smaller one. Now I'm adding another tiny little piece of double-sided tape at that tiny little part that you wrap around your bow and then I'm going to finish it off by applying again some double-sided tape at the back so that I can stick down the tails. It is really easy to put together those bows and I think they add so much beauty on the card. I am not going to put this card inside an envelope otherwise this bow is going to get squished. Instead I am going to hand out this card along with a gift to a friend that has a birthday. Now I am adding on all of those four compartments some sequins and they all come from the Nuvo Collection. They have gorgeous sequins and I'm actually using my Tonica Studio handy tool. I find it really easy to work with that. I'm going to peel off my double-sided tape and then I'm going to stick on top a tiny little piece of paper to make sure that everything is going to stay put. And here is my cut of ginger who got interested to the shaker card. I am going to stick the bow on top and this is going to turn it looking into an actual gift instead of a window. Now I am going to finish it off by sticking this panel on top of a standard card that's four and a quarter by five and a half that I have made out of gold cardstock. Now I am going to create a birthday card perfect for a princess in your life. I am using this piece of white cardstock and I'm going to back it up with double-sided tape so I'm just measuring there and I'm going to cover it up and the plan here is to cut out the crown out of this paper and then I'm going to add glitter on top on the sticky part so that I can create my very own glitter paper. If you hate using glitter then you can use glitter cardstock instead of doing what I am right now. So now that my crown is cut out I'm going to peel off the backing and now the top is super sticky so I can apply my new glitter. The color I'm using is called hot pink and I think it's perfect for the garly princess look that I am going for. Now I'm going to use the backing paper from that adhesive. I am going to use my bone folder and try to burnish the glitter as much as I can making sure that all that glitter is nicely stuck on top of my crown. I'm also going to use my fingers to make sure that I lift any excess and I have a beautifully shiny crown. Now I'm using an older array stencil from my favorite things again and I'm applying some pink distress oxide ink and this is going to provide the perfect background for my crown. Now for the sentiment I'm using one from the queen for a day stamp set that says may you be treated like a royalty today and always and I'm going to stamp that with the same distress oxide ink that I used for the background and then finally I'm going to put everything together so I'm adding some new deluxe glue at the back of my focal point and then I'm going to stick that on my panel. Now I have actually cut out this crown a couple of times more and I have stuck one on top of the other so this is quite thick and it really is going to stand out with all that thickness and the glitter on top. Now you can use gems and barely see your crown even more I decided to go with these iridescent bubbles and then all I have to do is to stick this panel on top of a standard card that's four and a quarter by five and a half. Moving on to the next card I have cut out a white circle and I'm going to apply some distress oxide ink over this stencil this is a new stencil which is called grassy edges super easy to use and you can build up layers of grass if you want to and it is perfect for creating those cards with little scenes. Now I'm going on top with some blue distress oxide ink and as you can see I'm using the brush which is going to make sure that I don't apply too much color and I didn't even touch the grass with my blue ink so I end up having this ombre effect on my sky now I am going to create my focal point and I will use this adorable turtle it comes from the stencil that's called love box and I'm also going to stamp a cloud now I am stamping everything with black archival ink on bristol paper and I will be using my prismacolors to color everything I find that using prismacolors over bristol paper makes my job really easy and I really enjoy the process now of course when I'm sharing more than one cards in one video I don't have enough time to show you the whole coloring process but it really is super easy to blend those pencils on top of bristol paper I'm also going to use the matching die to cut out the little cloud and my turtle and I'm going for a very clean and simple design for this card so I'm going to put everything together on top of the circle and as you can see I have offset the circle on my panel just a little bit and finally the sentiment I have stamped and embossed it with white embossing powder on top of black cardstock it says sending smile your way a really simple clean and simple design but sure to bring a smile on the recipient now for the next card I'm using one of my favorite stamp sets from this release it's called painted prints and it actually gives you layering flowers and leaves I will be using two shades of green darker and lighter one two shades of pink and two shades of orange for all of the flowers and the leaves now I am going to stamp a bunch since I don't know how many I'm going to need so with the magic of video editing everything now is stamped and cut out with the matching dies and I'm ready to assemble Now I have already prepared my sentiment which I have white embossed on a piece of pink cardstock that I tried to find in my stash that matched the color of the wink that I used for the flowers and the sentiment actually comes from the heart celebrating stamp set that has been released this month but the design is so versatile that it actually works with pretty much any sentiment that you decide to use I'm using tiny little foam squares at the back of all those cutouts and I'm going to put everything together at the top and at the bottom of my banner I'm also going to stick this panel on top of this black and white striped paper this is also from a pad by my favorite things and I absolutely love it I find that I go back to those stripes again and again now I'm going to finish it off with some clear gems I am going to stick a few of them at the top and at the bottom and my card is ready now on to my next card this is going to be a happy birthday card and I'm using the happy birthday candles stamps and dies so first I'm going to cut out this die and I'm using a white cardstock I'm going to run it through my big shoot and I'm actually going for a shaker card now there are so many different options on how you can use this die I decided to go quite monochromatic so I will be using one of those pattern papers that have blue and white stripes and I'm going to place them behind those candles in an angle so they will look like real candles with stripes so here I have already done the preparation that I needed to create my shaker card and now I'm adding my aquaflakes and you can go crazy and separate all those candles if you want to I decided to just add everything together but I did separate the flames so where the flames are I'm going to add some glitter and now I can peel off the backing and start covering up all those different areas with paper now my card is pretty much finished all that's left to do is to stamp the sentiment and I would advise you to stamp the sentiment before you put everything together I totally forgot about it but thanks to my stamping platform everything went fine I'm going to stamp the word happy from another stamp set that stamp set is called happy birthday to you and I will try in these type of videos to use as many products from the latest release as possible so you can see them in action and decide if you like them or not now the next card is super fun I am using the safari friends stamp set and I'm stamping the giraffe I'm also going to stamp a few of those leaves and I'm also going to stamp the little bird again I'm stamping everything with black archival ink on bristol paper but this time instead of using my prismacolor markers I'm going to use my zig clean markers which are fine to work beautifully on top of bristol paper as well now lately I have been using bristol paper a lot for my ink blending with the stress oxide things for using my prismacolors and my zig clean markers and I absolutely adore it and I run through lots and lots of these bristol papers every day so just like always after coloring all my images I'm going to use the matching dies to cut them out now I'm going to create my own pattern paper and this is just a piece of green cardstock that I hide in my stash I am using two designs from the same stamp set a bigger and a smaller one and I'm just going to stamp randomly all over this piece of paper and I'm going for a tone on tone look so I'm just using a ink pad that is slightly darker than my cardstock and once that was done I added some tape adhesive at the back and now I'm going to stick it on top of a panel a white panel so then this panel is going to go on top of a white standard card that's four and a quarter by five and a half and now it's finally time to put everything together I have already prepared my sentiment and I have some foam tape at the back it is white embossed on black cardstock I always find that the white on top of black helps the sentiment stand out and it says remember I have always got your back I'm adding again tiny little foam scores at the back of my giraffe I'm going to stick here on top of my panel and I'm also going to stick that tiny little bird on her back and I think that this match is perfectly with the sentiment a lovely card to give to a friend now some finishing touches and some more embellishment for my card I am adding all those leaf cutouts on one corner of my card just to add some more interest there for three of the leaves I went with glue so that everything is flat and now for the next layer I'm going to add tiny little squares at the back of the leaves and just stack them on top so I have a little bit of dimension there now to finish off the card I am going to add a little bit of shine of course you can leave it as it is it looks pretty already I decided to add some green crystals at the centers of all those stamped patterns and here is my finished card looking really cute now for the next card I'm going to use these dies that are shopping bags I'm going to cut them all from pattern paper and you can see them all ready to go and now I'm going to work on my background again I'm using one older stencil by my favorite things with lots of rays and then I'm going to go over it with the stress oxide ink and add a little bit of pattern at the background now before I assemble my card I need to put those shopping bags together since you cut out the main part of the bag and the handles separately this gives you the opportunity to play with different color combos for the handle and the actual bag I decided to go with the same color for both of these parts and now that all my shopping bags are ready I'm going to stick them on my card now I want to have some as if they are at the background and for those I'm using tape adhesive and for the bags that I want them to look as if they are at the foreground I used foam squares at the back now I find that this design is perfect for those gift cards that you hand out since they are all about shopping and I think it is also great for handing it out along with a gift now for this card I went with Happy Birthday again from the same stamp set that I used for the first card and to finish it off I'm going to add some clear crystals on some of the rays just to add some sparkle and to tell you the truth I find that I am quite obsessed lately with using crystals on top of my cards but I really love the sparkly and finally I used a yellow card base to match the rays of the design and finally let's move on to the last card for that I'm using the beautiful peacock stamp set I'm going to stamp one of the peacocks with black archival ink on bristol paper and then again I used my pencils my Prismacolor pencils to color everything and I have just cut out a little square window in this white panel which I'm going to stick on top of my card base I added foam tape at the back of my peacock and I'm going to place him on top of this little window now for the sentiment I'm going to combine two sentiments to complete my phrase so I went with a cut out that says hello and this is a tie from a previous release by my favorite things I have actually cut it out from the same colored cardstock as my card base I'm adding new little looks at the back and I'm going to stick it on top of my panel and the rest of my sentiment reach to my beautiful friend which comes from the same stamp set as the peacock and I have already stamped and embossed it with white embossing powder I'm going to stick it just next to the word hello and my card is ready now if you want to take it a step further of course you can add some gems some crystals I'm using those clear ones but since they are clear they are going to actually take the color from behind so they will look as purple in the photo and that completes the cards for today here is a closer photo on the last card just like always you will find the full list of all the supplies that I used down below in the description area as well as on my blog and don't forget that on my blog you will find the coupon code to shop my favorite things with 15% discount so make sure to take it out thank you all so much for watching I hope you had fun and you got inspired and have a lovely weekend