 Γεια σας! Είμαι Vicky εδώ και καλύτερα! Σήμερα θα δημιουργήσω two very fun cards using animation stumps. Αυτό είναι τα animation stumps by Uchi's Designs. Υπάρχουν πολλές διαφορετικές δημιουργίες. Η ιδια είναι πως να δημιουργήσεις ένας από τα φωτιά που δημιουργήσατε σε το stumpset και τότε θα παίρνεις ένα γραμμό στον κόμμα και όταν παίρνεις το στιγμό, η φωτιά δείχνει στις ανάγκες. Είχαμε πολλές δημιουργίες να παίρνουν στις ανάγκες και να δημιουργήσουμε δύο διαφορετικές δημιουργίες όπως θα δούμε τότε στον βίντεο. Από πρώτα θα σας δείξω κάποιες δημιουργίες. Αυτό είναι το εξαμβόλιο του stumpset που είναι called growing garden. Και θα δείξω το stumpset εδώ. Όλα τα φωτιά στις ανάγκες είναι πολύ καλύτερα, αλλά δεν πιστεύω για αυτό. Είναι πολύ καλύτερα, αλλά όταν παίρνεις το στιγμό στον κόμμα, όλοι θα είναι πολύ καλύτερα. Οπότε τη στιγμό Θα το βρήκαμε και όταν θα το βρήκαμε αυτό το στιγμό στον κόμμα, θα πρέπει να σας δείξω ότι αυτά δημιουργεί καλά με τότε τη στιγμό της stumpset. Ενείς, θα αφήρξω να δημιουργήσω το στιγμό με το στιγμό μου. Και θα αφήρξω και μπορείς να δείξεις όλες τις διαφορετικές δημιουργίες όπως εξαμβόλω. Μπορείς να δείξεις τα πόρια πλεύκαν αλλά τα φώτα πέρα και τα βαστά και όλα τα βαστά. και μπορώ να δούμε το σναίλ ή το λίγο νερό καν και νομίζω ότι είναι όλοι αδωρισμένοι. Και εδώ είναι ένα άλλο στάμψετο, αυτός είναι called Flying Owls και όπως βλέπω το γρίτο εκεί, μπορείτε να δείτε όλα τα όλες που βλέπουν και νομίζω ότι είναι πολύ κύριοι. Πιστεύω πιστεύω ότι αυτά είναι very fun things and they really give that wow factor to your cards. Τώρα το γρίτο είναι σε μπλάκ, but the ones that I have at least but they are available in different colors and there might be some grid dies coming up so you can cut out as many of those grids as you like. Now of course you don't have to stamp the images with black and you will see the example that I am going to do later on. Τώρα εδώ είναι ένα άλλο στάμψετο και αυτό είναι το αδωρισμένο γάτο και νομίζω ότι είναι αδωρισμένο. Ποια σκάλα εύκολα, εύκολα, εύκολα εύκολα στον κόσμο. Θα σας δείξω ένα πιο γιατί δεν μπορώ να βγω ποτέ τους. Αυτό είναι ένα άλλο στάμψετο που είναι called Happy Birthday και όμως είναι καλό για τα αδωρισμένα γάτος και μπορείτε να δείτε τα δάσεις που βλέπουν or the little cat that is opening its mouth όπως και ο λίγος λεπτυπος. Είναι ένα λεπτυπο που έρχεται έτσι από το κόσμο στο κόσμο. Και υπάρχουν πιο πολλά στάμψετο για να δείτε, όπως αυτές τις παραδοκές ή υπάρχει ένα άλλο με ένα μπαλάρινα που πένει πάνω και πάνω. Και μπορείτε να δείτε τα στάμψετος συγκεκριμένος ή αν θέλετε να μπορείτε να βρείτε αυτές. Είναι στάμψετο που βρίσκεται σε όλα τα πράγματα που πρέπει να κρατήσει ένα κάτο, όπως υπάρχουν στάμψετος, υπάρχει also one of those animated stamps. Μπορείτε να δείτε και θα δείτε some instructions on how you can create your card. So everything is in there. Και στο τέλος της παραδοκής μπορείτε να δείτε the type of the card that you are able to do. Now there are different types of these sets that include the tie, the grid and a little animated stamp. And you can see at the back the exact design. So in this case you have a slider that you slide left and right. You get that adorable little birdie and of course the grid mat. I'm going to show you a few of them and in a few minutes I'm going to put those into use. And I'm going to create one envelope card using this set that I'm showing you here. Where you are just sliding a panel outside and you can see the image moving through the window. And there is also a similar one but in smaller size that it pretty much works the same way as the larger envelope set. So I'm going to use this envelope set and create one of those little sliders. I'm going to take everything out so you can see what's included. So you get all these dies, you get one of the grids and of course you get a stamp set. One of the stamps that is actually an animated stamp. Now of course you don't need to get the sets that have the dies. You can just buy a stamp set and some package with grids and you are good to go. For my project today I'm going to use patent paper. And all the patent paper that I will be using comes from this pad. This is a 12x12 pad that is called Beach Day. And as always you will find links down below to the description area of everything that I am using. So now let's go ahead and create the first project. I will be using this patent paper from that paper pad collection. I am going to place that on my die cutting machine. And I'm going to place this big die on top. I'm going to run it through my scissors machine. And I will have the base for my slider card. So once you cut this out you will see that not only it cuts out but it adds some scoring lines. I'm going to use my bone folder and go over those scoring lines making sure that everything is nice and crisp. And when I fold that you will be able to tell where the slider is going to go. Now just because I need a window at the front. I'm going to use one of the circles included in the die set. But of course if you wish so you can use the square. Just like I'm doing here. Instead I'm going to use the smaller of the circles. Make sure that it's nicely centered. And when you place it on top of your die cutting machine. Make sure that everything is opened up and not folded. Otherwise you will cut a circle all the way through. So now I have my window at the front flap. And just to make it look more finished. I'm going to cut out a ring. You don't really need to do that. But it's totally optional. But it's going to make it look more beautiful. So again I'm going to use a patent paper from the same collection. I'm going to use both the circles. The smaller and the bigger one. Place it one inside the other. Run it again through my die cutting machine. And this way I will end up having a nice ring. Which is going to be a frame for the window that I have cut already. Now our little envelope with the window is ready to go. So all you need to do is to grab the grid. And cut it to size. So that it fits behind that window. You can use your scissors. You can use your paper trim. It's not going to show if it's a little bit crooked. So I'm going to place some tape adhesive at the back of the window. And I'm going to stick that grid at the back. And always make sure that it's nicely stuck there. Since you don't want that grid to interfere with the panel. That will slide inside and out. Now on the side I want to create a notch. Which is again totally optional. You don't really need to do that. I just want to show you the different parts of the die set. And how you can use it. Now I'm going to place it just outside of that line. So I'm going to run it through my die cutting machine. And this is going to create a tiny little notch. I didn't align it with the edge of my paper. Just because then the notch would be too big. And it would almost touch my window. So now I am going to add some tape adhesive. And then stick the flap on top. And you can see that our little window envelope is ready to go. Now all we need to do is to create the little insert. Now for the slider I'm going to use some white cardstock. And you need to cut it out to be three by four and three quarters. So this is going to nicely fit inside. And you get a little bit longer. So that you can use some of these dies that are included in the kit. To create the flap. So now I'm going to align it with the edge of my rectangle there. I'm going to hold it down with some sticky tape. And then I'm going to place the other one on the other side. Now this is not going to cut to anything really. It's just going to turn those edges into rounded edges. Just to give that a more finished look. And my insert is ready to go. And it should fit nicely inside my envelope. And since I had my CISIX machine ready there. I decided to cut out the cover for the tabs. So there is a die in the set that cuts out this little shape. That if you fold it in half. And place some glue in between. Then it's going to cover up the tab that is sticking out. So my insert is ready to go. I'm going to insert it and see if it's working nicely. And all that's left to do is to stamp the animated image. Now I'm going to show you that you can stamp either with black. Or with any other color or thing. As long as you keep the lines straight. And you align the grid. On top with the lines of the stamp. So I'm going to slide it. And I hope you can see how the sun is moving all around. So since this is going to be a fun card for summer. I wanted to have the sun going around and around at the center. And although you can see that with black ink it looks more crisp. And it's more vibrant through the grid. I wanted to have a fun colored sun. So instead I decided to go with yellow. And that's actually sunshine by Simon's stamp ink pad. Now instead of stamping it at the center. I decided to go a little bit off center. So that I have more space to see the sun moving. While I am pulling the little flap. And now I'm going to put in to use this tiny little stamp set. Which comes from my favorite things. It's called interactive labels. And it's full of little words for interactive cards. So I think it's the perfect match with those cards that I'm creating today. And there are words such as lift, spin, shake, flip, slide etc. So I decided to go with pull here. Now there is enough space on the inside to write your message. And even at the back. And just to embarrass it a little bit more. I decided to go with one of the stickers from the same collection. That says making a splash. And I stick it just below the window. You can fit a gift card inside that envelope. And just below the image you can write your message. And here is how it works. And just because that was so much fun. I decided to create a second project. And for that I'm going to use the set with the dies. The little image that gives you a birdie. As well as the slider. And this is from the set that is called animation slider circles. So for this we will end up having a little button that we slide left and right for the image to move. Now there are instructions and videos on their official website. On how you can do that. Just because I don't like following instructions. I decided to improvise. So I'm going to show you my way. So all I'm doing is cutting out a circle at the center of my pattern paper. By using the smallest of those two circles included in the set. And by the way my panel is 4.25x5.5. Now I am going to go ahead and cut out a ring. Just like I did with the first project. Again I used one of the pattern papers from the same paper pad. So everything is matching color wise. And when you cut out your window make sure that you cut it towards the top. So that you have enough space at the bottom for the slider. Now I'm grabbing the little die that cuts out the window for the slider. And I'm going to place it underneath my window. And I run it through my die cutting machine. So I have a slit there. Now I'm using my scissors and I'm going to cut out very thin strips of foam tape. And I'm going to stick them at the back of my panel. On the left and on the right side. So when I place the grid later on it's not going to slide out of the cart. So these are actually working as a stopper for the grid. And at the same time you don't want them to be very thick. Otherwise you will not have enough space for the grid to move. And you can see what I mean here. Now I'm going to align it with the grid on my mat. I'm going to place the panel on top. And I have a little piece of foam tape there. Which I'm going to stick through that slit. Which means that this way this is going to stick where the grid is. So now I can move that foam left and right. And at the same time I'm moving the grid at the back. I'm going to place it on top of those stamped images. So that you can see the effect. And I can definitely play with this all day. I'm going to stamp the little birdie. And I made sure that the lines were totally straight. I made that sure with the grid of my misti. And I'm going to stamp that directly on top of my cart base. So this is a standard cart that's 4.25 x 5.5. And just so that I have a nice and vibrant image. I'm going to stamp it twice. Now it would look awesome if you stamped the hearts with red. And the birdie with another color. But just because I made a colorful animation image previously. I decided to go with black. So that we can see the difference. Now my panel is stuck on top of my cart base. Now I need to cover up that foam tape somehow. So I created a little strip of paper there. And I have also cut out a heart. Using one of the ties included in the set. I'm going to stamp on top the word pull. And excuse my head there. And now the cover up is ready. I'm going to stick it on top of the foam. And my animation cart is ready. Now I keep calling it a birdie. And my daughter says it's a fish. But no matter what it is, I think it's super cute. And since this is a typical cart. You can open up the flap and write your message on the inside. And these were the two projects for today. I hope you had fun and got inspired. And if you did, don't forget to leave me a comment. As well as give me thumbs up on my youtube channel. Don't forget that you can find the full list of all the supplies that I'm using. Down below in the description area as well as on my blog. And if you need more inspiration. Here are two more videos that I created a while back. Thank you all for watching.