 Let's enroll the GOVDBC video doorbell. Go ahead and hit the hamburger icon and enter your code, then hit devices. Hit the plus sign in the top right hand corner, and then select doorbell. Head back over to your doorbell and press the button in the middle of the doorbell. It will ask to join, you want to press yes. The panel should find the doorbell at this moment. It does take a little while for the connection to establish, but once the connection has established, it will join your Wi-Fi network that you should already have present at the Geoalarm control panel. If you do not have Wi-Fi connected to the Geoalarm control panel, make sure you do so prior to doing this, okay, and there's our connection. Now it will join the Wi-Fi network, and you can see that I've blurred out my Wi-Fi network, but your Wi-Fi will be displayed under joining Wi-Fi there. Now it's adding the doorbell, it does sometimes take up to five minutes, mine took about two and a half. I've sped it up here for time purposes, but once it's added, you can select the name, I just selected living room, you can add multiple doorbells. So if you want to check settings on the doorbell, go ahead and select the doorbell option, and then select the doorbell that you want to change options on. As you can see there's all different kinds here, you can change the location, the motion detection, the sensitivity, the button LED being on or off, but that is how you enroll the GeoVDBC video doorbell. Take care. Please like and subscribe to our page for helpful programming and installation videos, product reviews, monitoring, products, and more. Visit www.geoarm.com or call 877-443-6276. Geoarm, the worldwide leader in DIY security.