How to Install the Drive 4G-X Fleet Cell Phone Signal Booster | weBoost





The interactive transcript could not be loaded.


Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jul 10, 2018

The Drive 4G-X Fleet is a powerful professional cellular signal booster specifically designed for installation in fleet vehicles like law enforcement, government, commercial vehicles, delivery trucks and maintenance or repair vehicles.

Please note the high-performance NMO antenna included with this kit is a permanent fixture to the vehicle requiring professional installation. The booster 12-volt power supply must be hardwired to the vehicle electrical system.

This is NOT a do-it-yourself project. This video is intended as a guide for professional installers.

In this video Dan shows how to install the weBoost Drive 4G-X Fleet in a law enforcement fleet vehicle. The installation process is very similar in other types of fleet vehicles.

All parts need for installation of the Drive 4G-X Fleet are included in the box, including cables and connectors. Tools are not included.

A 3/4-inch hole saw is needed to drill a hole for the antenna in the roof of the vehicle. Cables are routed through the headliner and firewall.

If you have an questions about installing or testing the weBoost Drive Fleet 4G-X, please give our Customer Support department a call at 1-866-294-1660 or visit us online at https://goo.gl/9xRCNU.

To learn more about the Drive 4G-X Fleet cell signal booster click here https://bit.ly/2L2NpbI.

And for more about weBoost cell signal boosters visit our Web page here http://bit.ly/2LTSDdq.

Thanks for watching, and remember to subscribe to our channel for more helpful videos.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...