 Γεια σας, είμαι η Vicky εδώ και καθώς ήρθατε στο τρίτο μέρος μου, εξαφαλήσαμε Πένι Πλάκ. Σήμερα είμαι χρησιμοποιώντας το Ωτομ's Blender Clear Stump Set, που έχει καλύτερα εξαφαλήματα για να φύγουν. Θα εγγραφήσω με αυτά τα τρία Παμπκίνδια και θα εγγραφήσω αυτά τα βασικαλότητα. Θα εγγραφήσω το σπίτι της βασικαλότητας, αλλά ακόμα πρέπει να εξαφαλήσετε ένας ή τίποτα, επειδή έχει κάποια τεξότητα. Και αυτό είναι λοιπόν why I decided to stamp the image with my misty tool so that I can repeat the stamping twice or even three times until I get a nice impression. Είμαι χρησιμοποιώντας αρχαϊκότητας because I will be using my tombo markers to color everything. Και όπως μπορείς να δεις, δεν είμαι χρησιμοποιώντας, the first time, so I'm going to stamp again and using the misty makes things really quick and easy. You can do this with Stampa Magic, but I think by using a misty makes the job really quick and perfect. So I'm going to stamp it three times and I'm going to bring my tombos to color everything. So now I am going to do some coloring directly with the tombo markers on my watercolor paper and I'm going to blend with a lighter color. So for the pumpkin I'm going to use only two colors and you can see how beautiful the blend. Είμαι χρησιμοποιώντας αρχαϊκότητας so you can see exactly what I'm doing and you can blend tombo markers with the blender pen or you can even use a brush with a little bit of water. But for this technique today I'm going to work only with my tombos. When I finish with the pumpkins I'm going to do the exact same technique on the leaves. You can see on screen right now all the colors that I have used for coloring the pumpkins and the leaves. And as always you can find a full list of all the supplies that I used today down below the description area along with links to online shops where you can get all those products. To make the leaves look more imperfect I added some touches with my brown tombo marker which I am then going to blend in again with my lighter green color. And with the same brown marker I'm going to touch the bottom of the pumpkins to kind of ground them somehow so they are not just floating on my card. And I'm going to use my tombo blender pen to blend everything out and smooth the shadows. And now I'm going to bring in one of my dies place it exactly where I want it to be and secure it with a temporary scotch tape. So I am now going to use my T ruler and I'm going to make two marks with my pencil just outside of the hole. So I know up to where I need to cut out I'm going to explain exactly what I'm going to do now. So I'm going to bring in my cutting plates and I'm going to place that up to those markings that I have created with my pencils. Now just because my cutting plates have a slope at the end it's always nice to place those markings just inside that slope. So I'm going to cut it through and you will see that this way I'm going to cut out only the upper portion of this panel. So now I'm going to pick up my pencil and I'm going to draw a line just over that design. Now you don't really need to do that if you are confident that you can do it by just using your scissors. I did a lot of work on coloring the pumpkins so I didn't want to make any mistake and having to color them again. So I'm just sketching where I am going to cut leaving a nice border around that design and now with my scissors I'm going to cut it out. And just because I needed to see what I am doing I didn't pay attention to the camera so I'm not working directly below the camera and you can't really see what I'm doing but in any case I'm just following the line that I have drawn with my pencil. So here it is all cut out and with my eraser I'm going to make sure that I don't see any pencil markings anymore on the sides and at the top of that pumpkin's design. So now that my panel is nice and clear I am going to put it on top of my card base and that's a very dark green card base and I am going to decide where the sentiment is going to go. Now for the sentiment I'm going to use the one that's included in the same stamp set and I'm going to use pumpkins that says Autumn Wases. I'm going to stamp it with VersaMarking through that window so that I know that it's nice and centered and I'm going to apply gold embossing powder. I have created my card base to be a standard card that's a top folding card that's 4.25x5.5 So I have stamped the sentiment and now I'm going to apply my embossing powder and then heat set it with my heat gun. Also don't forget that there is a giveaway on my blog for a $25 shopping spree on the Penny Black website so make sure to visit my blog and learn all about the details. And now I'm going to create the window. I'm using my tape adhesive at the back of the window so that I can stick on top a piece of acetate and again this is just recited acetate from packaging and now I'm going to use my foam tape and go all around that window. For my sequence today I'm going to use a beautiful mix that has great designs inside like little stars and leaves and beautiful colors and that's by Looses Little Things. I'm going to link it to you down below. I'm going to place it directly on top of my sentiment so that I know that they are centered. Now I'm going to peel off the tape and I'm going to stick it and I'm going to stick it directly on top of my card base. And that was the card for today. I hope you had fun and got inspired and if you did don't forget to leave my comment as well as give me thumbs up on my YouTube channel. Don't forget to visit me tomorrow for another card featuring Penny Blackstamps. And if you haven't seen them already here are day 1 and day 2 of this week's fun event. Thank you all for watching.