 Hello, and welcome to this explainer video on how to get started with the STM32 Nucleo Motion and Environmental Sensors expansion board using ARM Embed Environment. We are going to explain how to get your application running in the ARM Embed Environment. The first half of the video will focus on the software setup, and the second half will detail the hardware functionality available. Select the STM32 Nucleo board to a PC using a mini USB cable. The board is automatically detected and seen as a disk drive. Now connect to the ARM developer.embed.org website and log in with your credentials. Click on Hardware, then Components, and select Environmental under the Sensors category. Click on XNUCLEO-IKS-01A1 Motion MIMS and Environmental, and find the Hello World-IKS-01A1, and then import it into the online compiler. Open the main program and choose the desired target platform. Add a new one if needed. At this point, build the application and download it on the STM32 Nucleo board. Once downloaded, the application will reset and start. You can also reset the board by pressing the black button as shown. This simple application shows how to get environmental data, like humidity, temperature, and pressure. It also displays the inertial data from the accelerometer, magnetometer, and gyroscope. Information on how to obtain the board can be found on www.st.com-x-nucleo, under the reference XNUCLEO-IKS-01A1. This board includes a variety of MEMS-based components, an inertial module, composed of a 3D MEMS accelerometer and a 3D MEMS gyroscope, a 3D MEMS magnetometer, and a MEMS pressure sensor and a relative humidity and temperature sensor. Thanks for taking the time to watch our video. We hope it helps you get well on the way to your dream application.