Mikado Full Size VBar MIK4991 www.ReadyHeli.com





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Oct 21, 2010

V-Bar Overview:
Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System ("V-Bar"). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!)

- Auto-Learn Function
- Preset parameters for many common helicopters
- Programming via PC, control panel (item MIK4152), blue-tooth (item MIK4256) or mobile phone

Digital operation means maximal control and ultimate precision! This is also true for scale models with multi-blade rotor heads. A scale pilot can set the parameters so that the heli performs very stable reacts more sluggishly. This is advantage for inexperienced novices. You can reach a new dimension of performance even in fast forward or backward flight.

A further highlight of the VBar is its integrated Heading Hold tail rotor gyro. It has excellent stopping behavior and very constant cyclic and tail rate in any wind condition.


Digital flight performance - like a simulator

Very resistant to wind

Continuously adjustable head set-up, from mild to wild

Weight-reduced, no-play rotor head with less parts

Straight forward set-up, easily reproduced

Reduced air drag, releasing more power and giving longer flight times (e-powered helis!)

- Full Size V-Bar
- Version 5.0 Express PC Software
- USB cable
- Patch Cables: 3.1" For use with a primary receiver (if you opt NOT to use Satellites)
- 2-Sided Gyro Tape

Mikado VBar MIK4357 Is available at www.ReadyHeli.com.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...