 What's up, everybody? I've been asked a few times what's involved with registering or setting up your bamboo lab X1 or X1 Carbon after you get it unboxed. Well, today we're going to do a quick step-by-step video showing you how to do just that. My name's Jim and this is the Edge of Tech. So I'm actually in the middle of building an airplane completely from the X1 Carbon and I cannot wait to get this thing finished. But while I'm working on that, I've got a bunch of messages asking what it takes to actually set one of these up when you get it unboxed. Like I said, today I'm going to walk you through that. It's pretty simple. We're going to go step-by-step and when we're done, your printer will be registered to your account. All you need is your phone or a tablet and the bamboo handy app that bamboo lab put out. So get that ahead first, download that app on your phone or tablet, iPad, whatever it is. Now that you have that app downloaded, we'll get started now. You just need to plug this bad boy in like this and flip it on. When you flip it on, the screen will come on. You'll see the bamboo lab splash screen like this and it'll boot up. Once it's booted up, we need to walk through the screen setup. So we will hit your language, in my case, English. We will hit next. We're going to connect to our Wi-Fi connection. So I'm going to go to the Edge of Tech Studios and I'm going to type in my password. Once you have your password in, hit join. Once you hit this button, it'll go through the authentication and connect to your internet. We'll hit next. So now we need to grab our phone. If you have not already loaded the bamboo handy app onto your phone, you want to do that now. You can find it in the iOS store or the Android store or go to bamboolab.com and it's on there as well. Now we have the bamboo handy app open. We want to go up here and hit add on that plus sign. I'm going to scan a QR code. I'm going to back it up a little until it scans. There we go. So I scanned the QR code and it's asking me if I want to attach this machine to my account. Of course, I want to bind the printer to my account. So on the very bottom of the screen, you're going to hit bind and it'll go through the binding process. Now from here, you can see I have two printers attached. The first one is called Speedy and I'm going to give this one a new name as well. And this one right here is actually an old one. I need to remove that. I actually renamed that to Speedy after I reattached it. But now we can go back to the front page. We can go to the app or the bamboo studio and start printed to it. Once you have it attached to your account, you'll want to go to hit next here. And it's going to go through the terms and conditions. I'm going to hit agree. You can help them improve or not. I always do with bamboo lab because I want them to know everything that's going on, especially right now in the beginning. So I'm going to hit join. Now what we need to do is calibrate for the first time. So we're going to hit okay. Make sure that the hot end is ready to go. I'm going to hit next. And it's going to run through the very first calibration. And it's going to give you a countdown of how long that's going to take. In this case, it's 0%. It's going to go through the whole homing the tool head, the whole calibration. Once it's done with calibration, you'll see complete calibrating is done. You can hit next. And initiation is complete. Start to print. Just hit that button. Once your calibration is done and you hit okay, you may see this. This is a new firmware. And you want to make sure you run these. So would you like to go to the firmware page? Yes, we'll hit okay. It tells you we're going to go over the air version one, one dot a bunch of zeros on this case. This could be different by the time you're seeing this video because I know they're going to release a new firmware soon. We're just going to hit the update button. And this may take 10 to 15 minutes. I'm going to hit yes. It's going to run through the firmware update. Make sure everything's updated. It's going to get our AMS updated if you have one. And then after that, we're done with the initial setup and calibration of your X1 or your X1 Carbon. So that's it. Your bamboo lab X1 or X1 Carbon is now registered to your account. It is ready to go and you can start your first print. Now, I highly suggest you print the Benchy that's found on the machine right away because I'm telling you, it's incredible to see how fast it is and how good it turns out on the X1 Carbon or the X1 as well. Well, I hope this was a valuable video. If you want to see more bamboo lab videos, check out this playlist right here.