 To set up babyware with Sonnet, first ensure you have a locking DL coil cover. Plug in the 28 cm cable, making sure that the arrow and the metal logo are facing upwards. Then snap the coil cover into place. Thread the cable through the side loop of the attachment clip. To attach the cable to the audio processor, first check that the battery pack cover is in the horizontal unlocked position. If it is in the vertical locked position, unlock it with a plastic screwdriver. Then slide the battery pack cover off slightly. Plug the cable into the side of the control unit. Note the correct orientation of the coil cable socket and be careful not to use too much force. To secure the cable, slide the battery cover back into position and lock into place. Place the babyware ear hook cover over the lip on the lower part of the control unit and gently push upwards until it snaps into place. Then re-insert the ear hook pin to secure the cover. Slide the silicone ring of the attachment clip over the audio processor. Switch Sonnet to omnidirectional microphone mode. Then attach it to your baby's clothing, making sure the microphone is not covered and is facing forwards.