Loading...

ASUS Mining-P106-6G x 6 mining rig 153Mh/s

8,412 views

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 31, 2017

Hardware:
ASUS PRIME Z270-P bios v.0812
6 x ASUS Mining-P106-6G NVDriver 382.53
6 x Riser Ver.007 molex
Palit 120GB SSD 2.5" UVS
INTEL Pentium G4400 Dual Core 3,3GHz 3MB LGA1151 BOX
CRUCIAL 4GB 2400Mhz (CT4G4DFS824A) ram
PSU Chieftec A-135 Series 1000W ATX
4 x HDD SATA M-MOLEX F kabel
ALU frame

Click on Like, Favorite, Share this video or Subscribe

manuals:
Install W10 64bit & UPDATE!
Add first VGA P106
Install Asus NVDriver 382.53
restart and go to bios
Bios /system configuration:
Set PCI-E to GEN1
M.2 should be changed from SATA to PCI-E if u use 7 or 8 cards
Switch from Disable to Enable for 4G Decoding only after first GPU has been installed.
disable sound card
Add each GPU one by one
3, 4, 5 and 6 card install driver over Device Manager
Happy mining

Software:
W10 64bit
ASUS mobo Bios V.0812
ASUSP106 driver NVDriver 382.53
MSI Afterburner 430 OC 70/72/101/850/70
Consumption: 590W - 600W

ETH: 09/01/17-11:48:57 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 154.253 Mh/s, Total Shares: 2084, Rejected: 0, Time: 18:51
ETH: GPU0 25.756 Mh/s, GPU1 25.627 Mh/s, GPU2 25.734 Mh/s, GPU3 25.727 Mh/s, GPU4 25.665 Mh/s, GPU5 25.743 Mh/s
ETH: 09/01/17-11:49:25 - SHARE FOUND - (GPU 4)
ETH: Share accepted (62 ms)!
GPU0 t=52C fan=70%, GPU1 t=51C fan=0%, GPU2 t=43C fan=70%, GPU3 t=50C fan=0%, GPU4 t=50C fan=0%, GPU5 t=57C fan=70%

I hope you liked this video, if you would like to leave me a tip please send any amount of coins to any of the following addresses:
ETH 0xca9b440bc1f6d5bed9087eadca74249c348e24c9
BTC 1C52215hTjAZeQA4R1dY3FZwx1y9UvGjJN
THX

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...