Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jan 14, 2011
DriTac Adhesive Group has developed a repair system to correct the hollow spots and popping conditions for engineered wood flooring installations. These instalation problems cost the flooring industry millions of dollars per year. Studies and experience show that the major cause of problems for engineered wood floor installations are voids between the flooring and the subfloor.
PROBLEMS OCCUR ON JOBS WHERE: • The flooring adhesive fails to have full contact with the flooring, which results in gaps between the flooring and the subfloor. • Subfloors are not leveled properly before installation. • Old adhesives crystalize and release from subfloor due to natural wood movement. • Wrong spread rate of adhesive, resulting in release of wood from subfloor. • Warping of wood flooring due to water damage or (out of box) warped product.
BENEFITS OF DRITAC PROFESSIONAL WOOD FLOOR REPAIR SYSTEM • Functional and easy to use for both the professional flooring installer and the "do it yourselfer". • Hollow spot or void beneath the flooring is completely filled with the repair adhesive, truly repairing the problem! (Epoxy repair kits only tack down a small section of the problem area). • Drill bit and applicator tips are much smaller in diameter than conventional repair kits, creating a smaller hole which is easily hidden with wood putty. • No need to weigh down the repaired area. • Cost per repair is a fraction of the cost of epoxy. • Floor can be walked on immediately after the repair. No set up time is required!