Loading...

6534 | LaserTools Oil Extractor 10Ltrs

818 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Oct 3, 2016

Part of the Laser Tools workshop range:

•The capacity of the unit (10ltrs) and the specific diameters of the extraction tubes, make this unit ideal for modern engines of all capacities (up to 5.0ltr V8 )

•Portable Oil and Fluids Extractor and Dispenser – 10 litre capacity
Tubes are sized specifically for extracting oil via the dipstick aperture
•Complete with removable head for cleaning and maintenance. •Head unit fitted with Safety Relief Valve and Pressure Gauge
•Supplied with: Main hose (2mtrs) with control valve and quick-connector, Flexible clear silicone hose ( 1mtr ) 4mm ID / 8mm OD, •Semi rigid nylon tube ( 1mtr ) 7.8mm ID / 9.8mm OD, Semi rigid nylon tube ( 1mtr ) 5.3mm ID / 6.7mm OD plus Brake bleed nipple adaptor
•Replacement hoses available Part No 6535 plus main seal Part No 6536
•This versatile oil and fluid extractor from Laser Tools (part number 6534), has been designed to extract engine oil from engines via the dipstick tube (or oil service pipe if no dipstick fitted), using vacuum generated by workshop compressed air pressure. The 10 litre capacity allows the unit to be used on most modern engines and provides the capacity for at least one sump full of oil while still maintaining a good level of portability.
•Three extraction hoses are supplied, specifically sized for extracting oil via the dipstick tube — two semi-rigid nylon for use on dip stick tubes and one flexible silicone hose to fit and seal over the oil service pipe. A brake bleed nipple adaptor is also supplied which lets the unit (in conjunction with the flexible silicone hose) be used as a vacuum brake bleeder. The unit can also be used to extract gearbox oil, automatic transmission fluid and final drive oil. •For best results ensure that all oils are warm before extracting.

•All the supplied hoses include quick-fit connectors and the unit is easily evacuated by turning the extract/dispense control to dispense, which then pumps the waste fluid into a suitable container. The head unit is removable for easy cleaning and maintenance.

•Useful in any busy vehicle workshop and available now from your local Laser Tools supplier. www.lasertools.co.uk

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...