 Hi everybody, my name is Mauro Scanduzzo, I'm a Field Application Engineer for ST Microelectronic and I'm co-owner of the MEMS sensor. What I'm gonna present to you is an easy way to test our sensor. Let's talk about the 6-axis IMU, the latest 6-axis IMU that is called LSM6DSO. How we can test that? First of all we need an hardware, a motherboard, in particular I choose the latest version of Emotion Board, then it's called Emotion Board V3 and this is the board. We need the adapter board with the 6-axis IMU, the LSM6DSO and we need also the cable to connect the motherboard to our PC. In particular we have a micro USB cable. In terms of software, hardware, software and firmware, what do we need? So we need first of all the possibility to communicate with computers so we need to install the driver for the STM32 microcontroller. We need probably update the firmware on the Emotion Board and we need also the graphical user interface to communicate easily with Emotion Board. This is the 3 software part that we need to download from st.com. So I connect my Emotion Board to my PC. The first things that I need and I can catch the driver from st.com. I need to type a ST link. This is the link that I need. I scroll down and the last part I have the list. If I look carefully what I need is the driver for Windows 7, 8 and 10. I'm downloading this, get software, accept the license agreement. Once I have downloaded that I will be able to see if in reality my board is connected to a virtual COM port. I can open my computer manager and I will see if there is an association with a common port. The other step will be to have an alignment, respect the Unico version, respect the firmware that I installed. So I need to have a tool that allows me to update the firmware. In particular I have two different FAU files. One is related to Emotion V2 and is in particular case that we are using the Emotion V3. I need this file, ProfiMEMS2. So let's go in the st.com. So we need to download the software to be able to update the firmware on our Emotion board. The name of the software is called the FAUs. I press the link, I scroll down and I just press get software. I need to accept the license agreement. Once you have this you need to unplug your board, press the bottom to enter in the FAUs mode, insert again the USB cable and open the FAUs. You will find that in ST Microratronics, the FAUs, the FAUs demonstrator. At this time you see then the device is connected as the FAUs mode. I will be sure then that happened because if I look here in my computer manager, I will see then the device is really connected in the FAUs mode. I need to choose the proper FAUs file, open it and start to update the file. Once it is finished the update, I need to remove my board from the FAUs mode. What I have to do, just press the leave the FAUs mode and I will see then basically I will go back in a COM port associated, so in a sort of user mode. At this point I can close the software that I use, the FAUs demonstration. Go back to my PC and I can run the executable file. I have several devices on the left side of the graphical user interface, like accelerometer with a relative power number, gyroscope, e-compass, then this means accelerometer plus magnetometer, magnetometer stand alone, environmental sensor such as pressure sensor and humidity. We have the last part for the in-emo, so 6-axis IMU. If I look the list here, I don't have my 6-axis IMU LSM6DSO because it is a new device. I need to create a shortcut from the shortcut. I need to say just change the name to be sure then I will remember later then this is associated to LSM6DSO, open the properties and at the end of the target line add backslash LSM6DSO. At this point I'm able to run this shortcut, go in the section related to IMU and I will see then there is an associated LSM6DSO. When I select that will be the automatic detection of the common port, then is a common port 17, I will start the communication with my motion board. I need very easily to make sure then the device is working properly, press the easy configuration, there is a sort of pre-default configuration for the Excel and gyroscope, press the vertical tab with the plot and I see then there is a 3-axis SL and 3-axis gyroscope. If I move the board I will be able to see then everything is working properly. Thanks everybody for watching the video and if you need more information please visit our website ST.COM Thank you for your attention.