Upload

Loading...

Vermeer TG7000 Tub Grinder -- for sale VMAused.com

5,209

Loading...

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Jul 2, 2011

Check us out on the web -- www.VMAused.com

Price Reduced for Quick Sale

Date of Manufacture: Jul. 2005
Width: 11.9'
Length Transport: 42.5'
Controls: Remote & Operators Panel
Height Transport: 13.5'
Fuel Tank Capacity: 500 gal
Weight: 73,500 lbs
Height Operation: 18.75'
Length Operation: 62.6'
Conveyor Height: up to 18'

This TG7000 is a heavy duty, high production grinder with one of the lowest operating cost in it's class. Dependant on grinding variables, the owner has reported grinding materials at a rate greater than 500 yards an hour! Engine oil, filters (oil, fuel, coolant, air) have been
replaced. Clutch serviced with oil and filter changed. All wear components at tub floor opening replaced including wear plates at leading edge and deflector shield. The following hammer mill components replaced: hammers, cutters, safety pin, wedges and block supports with all associated hardware, and side wipers. New shear bar/anvil. This machine has been well taken care of and has never missed a service interval. It's ready to grind today!

The TG7000 has a 1000hp CAT 3412 Engine with twin turbos coupled to a PT Tech wet clutch with a gear reduction of almost 2:1 that is guaranteed to tear through any stump or it's like that will fit in the 13' wide tub opening. That's right...the tub is 13' at its top opening and 10'
at its base with a depth of almost 5'! Once the material is in the T-1 steel constructed tub, it is forced to the mill by four agitators that are welded to the tub side walls. Once the material contacts the hammer mill it is "game on."

Not just another hammer mill. The patented Vermeer Duplex II drum is installed in this unit. It is the latest technology in hammer design and wear item replacement procedures. It has reversible hammers, cutters, drum skin, side cutters, etc hence given the name Duplex Drum.
That's double life out of all of your wear components! Unlike other hammer mills on the market that have straight rows of cutters lined up in a north, south, east, west fashion; the hammers/cutters on the 7000 are strategically placed so that only two of its 22 cutters are
engaging the material at any given time, yet the hammers/cutters are angled to give full face coverage in a complete revolution. This provides more horse power to each cutter fully utilizing the power of the 1000 hp engine and the brute torque of the PT Tech wet clutch. Result: Production! There is no hammer mill on the market easier to maintain. No more pin and plate rotors, no more balancing out hammers, and there are many more benefits to offer!

This is a few of the great features that this machine has to offer. This unit has been prepped and it's ready for work. This is not a unit that will need a little TLC. It has been given it all its life and has just been revitalized to ensure a continued productive life and a profitable one for its new owner.

If interested, follow the link below to our online listing...
http://vmaused.com/used-equipment/tub...

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up Next


Sign in to add this to Watch Later

Add to