 What's up everybody? Welcome to the Edge of Tech. It is a noon live stream on a Saturday and noon on Saturdays where I live the tornado sirens go off. So now they're going off in the background. I'm not sure if you can hear that or not, but hopefully you guys can hear me. I'm going to give everybody a little bit of time to get into stream. But I see Shane's with us. How are you? There we go. People are starting to pop in, which is awesome. Welcome. Early stream today. I have a hard stop at 2 p.m. So we're going to rock and roll and get this thing built and hopefully get a print going right away on it. Stephen, how are you? It looks like you're a 3 a.m. stream for you. Well, holy moly, it's late or early, I guess, depending on how you look at it. But welcome. Welcome. Let's see. Got my fuel limit credit the other day. Awesome. Awesome. Joseph, great to hear. Andrew Rogers, how are you? Shane and Andrew Rogers, I see your members. Welcome. We were just talking. We had a member's only stream with patrons as well from 10 to 11 and Andrew and Shane were both with us for that, which was awesome. We had a lot of fun. We talked for about an hour about pretty much everything and nothing, anything we wanted to talk about. Kenneth, how are you? How are you? You have everybody starting to pop in. So we're going to do this kind of early. We're going to rock and roll. I see somebody's watching on Facebook. Thanks for the thumbs up. I appreciate that as well. But I'm going to put the keyboard and mouse over here and we're going to start pretty quick. So normally I would do a full unboxing, but like only fans, that's funny, Joseph. Yeah, real quick, Joseph, if you become a member on the channel or a patron on Patreon, we are going to get today was my first one. We're going to start doing pretty much just like chats. Like how you doing? You want to join the video in the audio? You can. If not, you can chat like you are now. Just hang out pretty much. But right before that stream, about 15 minutes before that stream was supposed to happen, I bent over to grab something and my back decided to be crazy and lock up and spasm like right in the bottom lower side. So hey, Matt, Rogue, how are you, Jeff? Anyways, so I sat for the last stream and it didn't get much better. And I'm not doing much better now, but we're going to rock this stream anyway. And instead of trying to unbox this all in front of you guys because it was not fun, I got it all unboxed already. We're just going to start building it pretty quick. So in the box, it was pretty awesome. Spring, how are you on Facebook? It was packed very nice. It was in that pink foam stuff. I know Angus was mentioning, hopefully they can get rid of that stuff and go to something more economical, but it was packed really tight, really nice. Everything's out and we're going to start building it. And then, oh, Aaron Rodgers, Andrew Rodgers, I said Aaron Rodgers. Andrew Rodgers, thank you so much. Thank you for the member chat this morning. It was fun. Hey, it was a lot of fun. Thank you for coming as well. I really appreciate that donation. Well, yeah, hopefully the back gets better. Maybe it'll loosen up as we do this, but we're going to get moving because I have a hard stop at two, so about two hours today. And all the buttons. So we have a couple of camera angles. We have this one and we have this one. And if you want to be fancy about it, we could be like, whoa, whoa, or anyways. But yeah, we're going to rock and roll, get it built, hopefully get a first print. And today, we are being brought to you by Thangs. Thangs is awesome. If you haven't been to their site, check it out. Thangs.com. Also, Caleb's with us in the background. He's working on actually editing one of the next videos coming up, but say hi, Caleb. Hi, Caleb. You know what we should do? I should get the Thangs bumper. I was just about to upload it. Maybe not the full video, but the animation that I do at the beginning of that? Or are you thinking one of the full videos? Maybe what we'll do in the future? We'll do like in the middle. There's that, again, the newest video we just put out. There's that Thangs thing. We'll just do that little short thing. It's like 30 seconds or whatever it is a minute. And then also, I like it. So Thangs, thank you so much for sponsoring the stream today. Also, Coex. So Coex 3D, if you haven't checked out Coex 3D, they're a sponsor of the stream today as well. We're going to be using Coex Filament to give this a try. And on the members chat that we just had, we were actually voting on which color to use. So I got some three new ones. And we'll surprise you with which one I'm going to choose, because the votes were split down the middle between two colors. Let's see. Got a question. Uper or Troll? That's funny. Local maker Michigan. That's funny. I think he is a maker. And a Uper maybe. I like it. Troll's good. So yeah, we're going to rock and roll. We're going to get this thing built. We're going to get a fresh test print going. And we'll talk more about Coex when we get going with that. But thank you so much to Thangs. And thank you so much to Coex for sponsoring the stream today. I really, really appreciate it. You guys are awesome. Also, if you haven't heard, I'll be at Murph. We'll be there all weekend. Caleb's going to join me as well. And we're going to have a lot of fun there. And we're going to hang out. Yeah. We're going to be base camped at the Greengate 3D booth. And I'm going to give away, you can't see it. It's hiding right over here. But I'm going to give away my Ender 3 V2 during Murph this year. But you got to be present to win and you got to enter while we're there. So there's only like this many people that are going to be able to win it because you got to be present because you want to take it home with you when you need it. Blasto, how are you? All right. So what are you guys drinking? I grabbed a vitamin water. And I have a regular water, but I grabbed a vitamin water today. I had my coffee already. Now we're rocking. Let me know in the chat what you're drinking. And let's get this going. All right. Step number one, prepare the Gantry X access beam and frame to the base. So what this is, is a longer LK5 Pro. There's been a couple other videos out there, a bunch of videos probably. Longer sent this out to me at the end of the stream today. We're giving away three rolls of PLA from longer as well. So don't forget to hang out for that. We're going to give away three rolls of PLA. Longer is graciously offered to give those away for the stream. But this is the LK5 Pro and let's rock and roll. Lots of vodka. I like it. Celsar with black cherry, coffee, pineapple, bubbly. I haven't had the pineapple yet. A lot of people said that's really good. I haven't tried pineapple yet. Diet Coke already had the monster longer than what? Longer than shorter. So what we're going to do is get the X access beam and frame on. So it looks like we're going to, let's see, we're going to grab this monster here. There we go. We're going to slide this over like this. Ikela comes out his sundown. I like it. I like it. What's funny is they show on this picture to make sure to put them in in a certain way. It goes like this. And to make sure that the X gantry is put on this in a certain way. So there's that. We're going to flip it upside down. I'm going to put the X gantry on here and not spin it too much. Somebody doesn't like pineapple, I suppose. It looked like there. Some brief comment that I saw. Huh? Where is my, this is going to end up being, I just want to make sure I get this right. The first time, right? It looks like it's going to go on like this. What's up? How difficult would it be to pause real quick and turn your auto focus off on your camera? Oh, is it going crazy? Yeah, it's going crazy. You're currently blurry. Yeah. Well, that's not fun. Was it not see my face? Yeah. It's not going back into focus. Thank you. Focus it. Focus it to the table and then switch to manual. Hey, Blasto. What up, man? Bill Collins, it looks clear to me. Yeah. I think he was drinking. Let's see if this is any better. So I changed focus types because if I put it on a certain one, it shows me a level. So I made the camera level. I forgot to change it back. So it was like focused like right here somewhere or over that way. Is this better? Way better. All right. Thank you. All right. I appreciate that. That's why we have Caleb. Caleb's a man. It's going to go like this. It's going to go like this. This is going to set down in here because it has to. Maybe not upside down though, but not upside down. I looked at it. I was like, no, that's not like that. Okay. There we go. I believe so there's these mounting holes in the back of this side and it shows on the picture that it needs to go on the same side as the stepper motor here. So we just did that now. Doesn't want us to mount it to the interesting. It doesn't say anything about putting this on the frame yet, but it but it didn't says get the coupler ready. I think we would mount it down. Oh, I see that's the next interesting. All right. We're going to go with their instructions. So once we get it mounted, we're on and it was pretty good ish. I'm going to set it like that carefully. So how we been? Let me know in the chat. I know I'm not paying a lot of attention because I'm trying to rock and roll and give this quick build here. Give Caleb a raise. He deserves a peanut butter with his bread and water. Yes, Brookfield, Wisconsin. I saw something the other day that was it was like, we have jelly beans. Why don't we have peanut butter beans? And it was like, yeah, those are peanuts. Ha, that's funny. Peanut butter beans. I'm just going to go with OK on that one. So the next thing we need is our lead screw. I see the focus is much better. If I was focused on the screen, I would have seen that it wasn't focused. Everybody's out doing stuff. It's a beautiful Saturday outside. It's nice and hot here currently. It's like 94 here today. And it's been storming all week. So it's. Oh, really? We're in a drought. We're officially in a drought now. Everything's drying out. So the air is real thick outside. Thick with three C's. Yeah, three C's. That's our legumes. That makes them a bean. All right. That's very technical. Blasto. There's our lead screw. Let's just see. Hey, look at that. That is a straight lead screw. Yeah, we in that one. I like it. We should see where it leads. Huh? That was a good one. No, it wasn't. Don't give me that. So now what it wants us to do is put our our lead screw down through and mount our coupler to the back right here. And then when we do that, the next step is to mount it all to the frame. So we're going to do that great day in England. I'm too pale for sunlight. That is funny. That is funny. Dean, how are you doing? He popped in there towards the end of the stream. At the end, I think. Welcome back. I got my trusty T-handles. UK Warm isn't it. I'm loving it. You know, I think anytime you can get warm in UK, people really dig that. I was out there in June of, oh no, it just dropped that. I'm going to have to try to pick that up. I was out there in June of 2017 and it was gorgeous. As expected, it rained. But you know, resin printer tool and cleanup. We can do that. Loving. This is a broken gym trying to pick stuff up off the floor. Hopefully the, hopefully that air conditioner is not blowing. Is that bad, Caleb? Air conditioner just kicked on, so. I'm not really hearing it. Good. Watching the doggos in the park across the way. Nice. The doggos are probably loving the park right now. Oh yeah. Just make sure there's no washers. There's no washers. So basically what it wants me to do quickly is to secure the the stepper to to the extrusion here. And then we'll put down the lead screw and connect that. So a lot of the newer printers, they're coming with this stuff already built now. Maybe a little different to pack. But it's really nice because you're not having to, you're not having to do these steps. Really, this is already done. And you just put it on, which is super cool. But I also like building printers too. You see William's comment there, Caleb? Caleb is actually working on editing a Monday's, a video for Monday currently. And so he's not a hundred percent. Sorry. He's not a hundred percent paid attention. Actually, I just uploaded the. I'm uploading the things bumpers at the moment. Thanks. I have to do one for. I'm going to have to do one for coex too. I don't know if I should take that as a compliment or not. I sound like Jesse Eisenberg. Hey, H Colorado and Carl Fenton. How are y'all? Thanks for sharing. Welcome. All right. So I got it in there. I'm going to raise it just like a maybe a thread or half a thread up. Okay. I don't want it to be bottomed out. What's up? Sorry. Yes, sir. I was just going to say I've got the I've got two versions of the things bumper uploaded. Thanks. You want to run them at some point? All right. I'm tightening in. Matt, shut your face hole. Oh boy. Nothing. What happened? Come on. What are you tightening? Moving on. I don't know what I don't know what's happening, but I'm going to pretend I didn't see that comment. Um, so I'll tighten that in. Just make sure one is tight too. Okay. So I am not going to actually tighten this stepper motor in until I get it in position and I go maybe up and down a little. I just want to make sure it's not a skew. Maybe we don't have to space it out or something. It does say in the instructions to tighten it down now. It probably it can't go anywhere. So I guess it probably wouldn't matter unless it was at a skew. So we'll just do it. I was going to leave it a little loose just to make sure everything's rolled smooth, but the instructions say tighten it down. I probably should follow instructions. Does anybody else do that? So like you built a couple printers, maybe you've been printing for a while and then you're like, I think I'm going to do this out of order because it makes more sense to me. But really for me, I probably should follow instructions for the stream. And then you've got it assembled and realizing you need to run like a wire loom through a whole assembly. Yeah. Yeah. Yeah. Right. So we got that down. We installed. It says tighten the four screws of the coupler. There's four screws. Oh, crap. There's four screws. All right. Let me just make sure I get an all four tightened here. Hello, 3D printing friends. Brian Vines is with us. Hey, good thing I read the instructions. There's four screws. There we go. Next. RTFM. Number three, we're going to attach the gantry to the base with four, five by 20s. Brian, how are you doing on this fine day? Reading instructions are that's funny. Quit. It definitely makes the company look better when I read instructions and don't screw up their friends. Read the fine manual. I like that, Brian. Yeah, I don't I'm going to go out on a limb here and I don't think F stands for fine, but okay. Steven, that's that's pretty funny there. Brian, little known fact. Brian has been known to proofread manuals for companies. I'm just going to throw that out there. Not saying they I'm not saying they take all of his corrections, but they but he does proofread them sometimes for some for some companies and whether they listen to his changes or not. That's another story, right, Brian? All right. So while we're while we're playing, I said, again, this is sponsored by things and also co-ex3d. That's funny. Thanks, Quentin. We have a quick bumper for things. I think Caleb just uploaded. Let's see if it plays. Yeah. Do you want the one that's just the little animation or do you want the one that's like the whole bumper? Let's do the animation. Just the animation. Three, two, one, go. I like it. I like it. Thanks to things. That's right. But we have a really cool project with things coming up. We are, we as in me, I'm a guest judge for a contest that starts Monday. So the contest will be a print contest and it's actually not with things. It's with full of mint. Sorry. And we use things to get the models for your. That's right. Use things to get your models for your print contest on full of mint. So we have a full mint contest coming up and it's really cool. You print something submitted on the social medias and hopefully you can win one of five prizes equaling $500, $500. And I'm going to first guest judge. So I'm a guest judge. It would be a lot of fun. So this goes in like this. Look how tall. Geez. I have to adjust my camera. But this thing sits up on stilts, essentially. And yeah, so it's all around the world. And I, I, I, um, anyways, that was a bad joke. All right. It's all around the world. Anyone can enter and the contest is going to be a lot of fun. I can't give away what the theme is. If you were on the member only stream before this, I did on accident, on accident, gave away the theme a little bit. I didn't, I didn't for sure say it kind of, but I definitely was talking about it. And then I was looking at the video that I was shopping up earlier. You definitely, there's a lot. There are a lot more details that you did not go over in that last stream. So, oh yeah, yeah, the only, I'd say you only really hinted at it. I did. So I thought I could potentially screw these in by hand to get them started. I was, it was incorrect on that statement. Screwed up. I'm going to bring this, bring it a little closer over to the edge of the table so I can actually see. And you guys can see. So I believe this is 300 by 300 by 400. Um, it's my first longer, uh, printer. All of the other ones have been shorter. So that, huh? Come on, Brian. That was for you. Get it? Shorter. Uh, moving on. So I got those two hands started finally. I'm going to spin this thing around. And if you're wondering why I didn't unbox it fully on the stream, it's because, um, yes, Brian, that's what I'm saying. It's because right before my last stream, I bent over and something tweaked in my back. So my back is a little tweaky right now. It's not happy. So I unboxed this really quick. It wasn't really quick, but I unboxed this before the stream started. That way I could actually, uh, move it and not say bad words during the stream. So I'm going to lift this up. I got everything hand tightened. I'm just going to tighten these up. Hey, Victor. Welcome to old age. Amen. Right. It, uh, it was, yeah. So I have a hard stop at two o'clock my time. That's, uh, about an hour and a half here. And, uh, I, I promised Lindsey that I would take the little man the rest of the day. So she could have some time for the rest of the day. And it's going to be a lot of fun to chase him around. Uh, yeah, it'll be a lot of fun trying to chase him around. Um, Caleb, can we have a quick, quick on the bleep button? There's no being quick on the bleep button. Even if I click it, when it's supposed to make the sound effect, there's still a delay. So you've used, so you've used the sound panel before? Yeah, I have a, I have my own sound panel. What would you use that for? She's, she's, she's, I have a very limited, it's a very limited, uh, watered down version of the, uh, the software that I can run while one of these streams going. All right. Children in a twitchy back, man, you're going to need a heat pass. Probably. So I had my wife spray me with some bile freeze quick, which is like any other muscle thing, like like Ben gay or any of those, um, you know, so this is on there. It's solid. Yeah. No funny business there. Caleb. Becchiotomy. Becchiotomy. No, I'm laughing at what is back. Doctor said you need a back, yeah. Becchiotomy. Becchiotomy. Becchiotomy. Um, Caleb would have to, uh, children in a twitchy back, man, you're going to need a heat pass. That's true. All right. That was step three on the step. What's this camera showing right now? That. All right. Step number four, we're going to, uh, install the supporting rods and screws. So it wants us to, uh, install those. Now. So let's, that's these two. I'm going to slide this over. This is like so close to hitting my microphone right there. Hopefully that air conditioner is not too bad for you guys. I finally got it installed in the garage, uh, last night because it was 90 degrees in here. And, um, Lama's here. Uh-oh. Everybody don't tell him, but, uh, Lama, I'm sorry. I'll get you those graphics. I had to do it here and, uh, instead of where it normally is, because my lasers are venting out that area and I didn't want the lasers to vent out and then be sucked right back in. Lama, you owe Lama some graphics. Yeah. Look at this very nice plastic grab window breaking sound. All right, uh, 3d printing. Hey, uh, Lama, how is the CNC going, man? I think you got a pretty awesome one in your garage now. Um, quit and bought a laser based on your reviews. Awesome. I hope you love it. There's going to be a new one coming. It got working last night finally because of firmware issue. It was a early model and the firmware wasn't taken. I got it working last night with the help of Gil from Oortour. He's the master. He's awesome. Um, and it says it's spoiler alert. It's the laser master to pro and it is the beast. We'll say that just the pooch manual did the hot makes today. He's talking about the grad. He was, he's got a project he's working on. He was looking for the hot makes. Got it, got it, got it, got it, got it. Okay. So we're going to put these on now. And what that consists of is light speed. All right. Oh, Steven's with us. Yep. You should have been in the member chat. It was a lot of fun. Yeah, we were just talking about you. Yeah. Uh, don't tell him what we said though. There was someone else on from Arizona and, uh, I mentioned that I'm, I knew you were from Arizona. I met Steven. We had an awesome lunch. It was actually really good. Uh, I hope that place still exists after COVID because when I come back, we need to go there. Uh, laser master two is great. You hope Arizona exists after COVID. What do you say you hope Arizona exists after COVID? No, the, uh, the, the hamburger place we went to. Um, yes, I hope Arizona exists. You know, uh, lights being said that they're still there. So nice. All right. So I'm reading on how to attach this. It looks like the insides of everything. So what that's going to look like is right here down to right here. I don't know if this can give me a better shot because I'm so zoomed in. But yeah, that's Shane. That's funny, Shane. True about funny. No. I am rebranding. I see that lightspeed 3d like it funny on, uh, on, on it's called Facebook. We got a couple of mad faces and miscomments or something. I think it's only one mad face. Oh, maybe it's one mad face. Why don't we got a mad face? They're wrong. That's what it is. It's just they're wrong. Let's go see. I don't see any comments I missed. I said hi to spring earlier, but I don't think I missed anything. If you're watching on Facebook and you gave me a mad face, let me know why. Why? Comments better. Reading a why. German 3d printing nerd is here. Hi, German 3d printing nerd. I heard that one cable. Back to editing, huh? No. Yeah. I'm sorry. I'm here. No. Yeah. I'm sorry. I'm here. I was looking at the map. No. All of a sudden I heard, uh, I heard a video. I thought I heard a video. Oh, yeah. Sorry. I need a mute. You're fine. I was just like, I'm pretty sure I just heard my own voice and I wasn't talking. Sorry. Mad faces gone mad face. Oh, is that like friend face? Friend face. What do you know? Can anybody give me a reference to where I just came up with friend face? Hang on. I know that. I know that from somewhere. Friend face. Yep. Don't type it in Google, you cheaters. No. And I'm not going to look at the chat either because this is going to drive me crazy and I want to figure it out. Friend face. Friend face. Reference. It's not black mirror. I feel like it's a comedy show. Oh, someone got it. You rock. Isn't it? Oh my god. I want to look at the chat so bad, but I think I said, what is this for? This is a longer LK5 Pro. Friend face. Oh, it's IT crowd, isn't it? Yep. Hail yes. It is. The IT crowd. You have not seen the IT crowd. It is hilarious, by the way. It is so good. Lightspeed on a Mac mini at the moment. Plus I even tried copy cat. Copy, postying the light bulbs and it still couldn't tag you. Crazy. And I can't see the screw. I'm supposed to be screwing that in here. So I know I watched Angus's review of this recently and he said to grab a square and make sure you're square because this will pull it out of square if you're not careful. But I got to be able to do that. Friend face. Oh, Angus. I'm just thinking. Yeah. I guess it's good stuff. Maybe you heard a hit. He has a little channel. Reviews. It's called Makers Muse. Just a little channel out there somewhere. There we go. I got it finally screwed in there. It took me a minute. How's that Brian? Uh oh, are you changing something? Brian. The printer is longer than the shorter printers I own. That was a good one. Oh, sorry about that. Quentin, did you ask what these are for? Yes. Someone just responded. So they stabilize your whole gantry so this doesn't move so much. Like my table will move a lot, but not the gantry. Now, what's interesting on this one is that they did this, which is cool, but they didn't do dual Z. So this is a pretty good size printer. It's 300 by 300 by 400, I believe. And in my opinion, if you're going to take time to put these on here and stabilize everything, why not just put the actual dual Z on here too to make it even better? But we're going to find out. I mean, maybe it doesn't need it. Anyone tested the Viper yet? I have not. I don't think Brian has one. I know a couple of people that have them, but they're not on the chat, so I won't mention their names. But I did not test the Viper. Actually, recently, anycubic, I bought a anycubic Washington Cure Plus station off of Amazon. I actually bought it and I didn't open it yet. But I need a good anycubic contact. That's what I need. Don't have much of their stuff. I have some stuff, but the person I was working with left the company. Hey, how are you doing? Another giveaway. How do we enter? Just hang out. All you got to do is be here for this giveaway. We're giving away three rolls of PLA filament courtesy of Longer. That was the deal with the printer. They're giving away, let's raise that up. Nothing's plugged in yet. So, yeah, Joe Telling did a full build and stuff with it. You know what's silly? The Viper kind of reminds me of a CR6. Just saying. Just saying. Not bad there. Not bad there. Here, I'll turn this so you can see. Boom. Might as well check out. Not bad, huh? That's pretty straight. By pretty, I mean, it is. Same here. So, now that I know that is straight, I'm going to... There's these little nuts that I'm going to switch this around so you can see them. Now, you can't see them up there because this is too tall, but there's these little nuts on the inside right here, and I'm just going to tighten them in so they don't move. By the way, you're using a combo square, which isn't square. Well, that explains why I'm not square. I need a good machine to square, and I think Chris Cursey just posted one recently on his Twitter. I need to snag that bad boy, and apparently my square needs to be more square. Square is the square I'm using. Yes. These nuts. These nuts. Yes, these nuts right here. I've just tightened them. Ender 3. Almond folks. I got it. What was that? Almond folks. Yeah, Almond folks. Oh, let's see. Ender 3 Pro. Nice. Good printer. Yes, precision machine is square. That's what I need. I'll get one. All right, next. It looks like we're going to put on a limit switch and a filament holder. So I need a limit switch. I see. It's not a limit switch. You know what this is? Unless there's a switch. They call this a limit switch, but what this is is the lead screw the bearing for the tops of the lead screw doesn't spin. And if I actually hold still, the bearing does float in here. So that's good. If that was solid, I wouldn't like it. Even though we already proved that the lead screw is really straight on this. What do you say about me, Quinton? Look at that. So what what I'm saying is so I can show it better. So this they want me to put it on. So the lead screw sits in there like that and it doesn't shift around. That's what's going on. I feel uplifted. That's good. Yeah, right. I think it's going to screw into it is going to screw into those two holes back there. And there's two M16s. So I'm going to spin this so I can actually see it. And then I'll show you what I mean in a second. We're rocking. I got mail delivery. Be right back. All right. So this is going to sit like this and screw into the gantry here. Not really any of it. I love it. I love how much the community comes together on these things and and talk smack to each other. You know, it's just a lot of fun. Anyone out there going to Murph? You know, in the comments, if you're going to Murph this year, Goshen, Indiana, I would normally skip the upper bearing as well. But because it's in the instructions, I'm going to do it for now and then I'll watch. Now I did test the lead screw on my table and it did not wobble at all. It was nice. It was actually one of the nicer ones I've seen. Yeah, there's only one lead screw on this. So there's that single Z. Correct. Should probably drive there. Definitely should probably drive there. Murph is the Midwest rep rap festival. It is in Goshen, Indiana. It's coming up the 20 the weekend of the 25th, sixth and seventh. It is. It's awesome. You don't want to drive alone. You should bring your imaginary friend or a stuffed animal. Well, you know what I said, Stephen, if you come, I got you. Let's see. Oh, and the filament holder needs to go on as well, which is this bad boy. So we're going to put that on. Looks like on this side like you would expect. And there is two holes. There's two holes right here. Let's see. There's two holes right here that the filament holder screws into. Nice. That's awesome that you're making some magnets. Find me. So here's the deal. If you're going to come to Murph, I highly suggest it. It's a lot of fun. And if you do come to Murph, make sure to come say hi to me if you see me. But let me know who you are because a lot of people will come up and say hi. But I've never probably, in most cases, I've never seen you or met you. I don't know who you are. So introduce yourself. Say hi. Tell me who you are. What your YouTube name was would be good because that's how I know most people. Like Matt Farmer is here. Spring is still with us as well. But Matt Farmer is in the house. He's going to, also going to Murph, which is awesome. Try to use my Ender 3 Pro upside down. All right. That sounds like fun. I want to, if you use your Ender 3 Pro upside down, let us know. Maybe shoot a video over or something. Because I would love to see that. 10 or 3D, how's it going? Long time no see. Long time no see. Hope everything's going good. I wanted to set up a table, but I'm riding a gold wing. Well, maybe if you take your silver wing, you could bring more stuff. Let's see. True story. Shane, that is a true story. It was cold. And then my transmission almost died on the way home on a brand new freaking car. Anyways, that's a different story. All right. Filament holder is on. Bam. You can see it. Crappy satellite internet. Oh, well, hopefully you can get the good stuff when they actually release it to everybody. Starlink. So they, I signed up for the beta for Starlink. And I have good internet. I mean, it's not a great company, but it's great, you know, good internet for sure. But I thought, let's check out and see what it was. And I would like to do it. The problem is, speeds would go backwards for me, and I can't have that with the streams. But, you know, it wasn't, it wasn't a bad deal, though. 100 bucks a month, I think. How are you? Looks like John, let's see, the giveaway. The giveaway is a, is three rolls of, I think it's three. I got to check. Three or four rolls of PLA filaments. Oh, nice. Uh, that would be awesome. I think Steven just sent me a text message. Let's see. I think that's Photoshop, Steven. Got to bring her, or it doesn't, it didn't happen. I'm just joking. Anyways, um, yeah, the filaments longer than usual. Right. Good one, Brian. We always can leave it to Brian to throw those in there for us. All right. What do we got next here? The touch screen, the touch screen back cover and screws. So we're going to put the screen on this monster now. And I believe the screen will go over here, maybe. Oh, it goes right here. Right there. Dad jokes puns. Yes, all the good stuff. So here is the touch screen, or the screen, I don't know. I'm guessing it's touch. Look's touch. Warning. Set the right printer input voltage for your country's voltage. See the side of the PSU. Says that right on the screen. I like that. Good. Good, uh, warning there. I appreciate that. You know, I think. Warning. Warning is longer. Yeah. Warning is longer. What software does this use? Are you asking for a slicer software or firmware? I'm not sure what you're asking. That's right. That's right, Tanner. I said Tanner 3D. It's Ricky Tanner, I believe. Longer. That's rather personal. Jeez. So good. Hey, speaking of that, I heard Brian was going to put out a video on the artist D. I'm just joking. Uh, HotMakes was awesome Monday night. Thank you, Mike. I appreciate that. So it was. We had a heavy hitting HotMakes on Monday. Yeah. You definitely say that. What? It was a good show, Jim. It was a great show. It should have showed up. Yeah. One of these days I'll join him as a, like a not very important guest. Oh, I love it. Stay till the end. That's right. Stay till the end. Uh, if you want to be in the giveaway, I'm going to give away everything. Maybe while this is doing the test print, we'll give away stuff. And by stuff, I mean filament. So this gets screwed on to here. That's that screen seems longer than other ones I've used. I wonder why. Get it? Mom, Brian, that was for you. Brian is. I invented the thing longer. Yes, I invented the internet. Uh, yeah, fix some dudes here. Fix some. Yeah, thank you for being there on HotMakes. Remember HotMakes is on the new channel. I had a bunch of people like, what happened? You didn't have a show. Now we had a show. It was on the HotMakes channel now. And if you missed it, we had a Daryl. The broken nerd on and he is phenomenal, by the way. Also, we had a whole bunch of people show up. So, uh, I mean, right away we had Uncle Jesse and then all of a sudden Amy Double D and then Joel Telling and then the icing on the cake, uh, the piece of resistance. You could say Norm from Tested jumped on as well. And it was a lot of fun. Everybody was great, but Daryl's work is just awesome. Altered proxy, where were you before? Is there another stream going on? All right, on to number seven. What was that? How dare they? Oh, you know what? I gotta, I gotta install this, this, uh, this right here is an adjustable ZN stop. And I gotta install that quick. It's on a, uh, here we go. It's on a little T-nut there. And I just realized this, but on this side of the printer, there's a sticker that you can't read right here. It says installation location right here for the ZN stop. So, you know, in case you want to know where it goes, it goes right here. This, this would be one we have to adjust right away, but at least it's adjustable. I appreciate the adjustable ZN stops, uh, because you can adjust them. So, is CBCNC, they're not doing tours this year, huh? Uh, from what I understand, no, they're going to be doing like a, like maybe something virtual. At it. And I know they're going to be running as well. Sweet. Uh, hey, Brian, have a great, have a great rest of the weekend. Uh, great. I really appreciate you swinging by. Dan's in the house as well. But thank you so much, Brian. I really appreciate that. Dan, how are you? Another one of my fine members. Let me flip back over here. Another one of the fine members of the channel. If you want to join membership, uh, you can do that. Um, hitting that little member button as you see on your screen there. We are, what, 14? I'm going to try, I'm trying to hit a goal of 25 by the end of June. And we do cool things, uh, actually earlier today, we had a member only stream where we got together with some, uh, members each Colorado year one as well. Um, and we just chatted for a little while. It was a lot of fun. About an hour and we just kind of talked. It was a good time. Right Caleb. Good time. Good times. Good times. It was, it was a lot of fun. All right. Next thing is just to, to wire everything. So I'm going to spin this bad boy around so we can kind of see what's happening. Uh, so I didn't have a ton of time to play with all the cameras before the stream because I broke myself and I couldn't move very well. That's what really happened. Um, so this is kind of cool. Everything is, everything is pretty well, uh, labeled. It's Z, which is good if I can reach it. Even better. Well worth a 2.99. Thank you so much, Dan. I appreciate that. Um, yeah, join up. Uh, if, if anyone joins membership while we're on here, you'll see some fun, fun graphic and, uh, some crazy music probably. Oh, you got something set up. Got something set up. We'll see if it works. See if anybody joins our crazy cult. I mean, fan club. I mean, uh, I'll cancel my membership and then rejoin. There you go. This is for the LCD. So I'm going to go under everything. Uh, I don't suggest canceling and rejoining. No, I don't think it would work. It would probably, because I think it's monthly, right? Uh, probably. Yeah. So I would cancel. Um, so we got Z in here. We got the LCD. Uh, there's got to be an end stop somewhere. There it is. Hiding under there like that. Lots of chores. I totally understand the chores. I got a hard stop in about an hour here. Uh, so I could take the little man and hopefully I can walk by then. Extruder. Michael Grugell. Fix him, dude. Just being able to support Super Chat on HotMakes channel though. Yes. Hopefully, uh, hopefully we'll get back to that sometime soon. It's a pretty big barrier to entry to do that on a channel. Yeah. We have to have, I think, a thousand subs and then so many thousands of watch hours, basically. So it's going to be a little while before we can get there, back to be able to Super Chat on the HotMakes channel. Yeah, it'll get there though. That being said, um, you know, people who are watching or if you have friends that you think will be interested like just getting people involved and having people go over and subscribe to that channel. It's going to make it go a little bit faster. That would be awesome, isn't it? Yeah, shoot it out. And when we're live, let everybody know because it doesn't go live anymore here. Well, look at this. Dan is showing off his sweet, sweet emojis that you get when you become a member. Nice. Um, I'm going to make more. I need to make more of those. Yeah, it'll be fun. I'll come up with some new ones. If you have any ideas for new ones, let me know and I can make them. Because I can put my own emojis together. That's where I got those. So we've got coffee, some 3D printing, a rocket ship. So I believe I got everything plugged in here. I should check the power supply. Let's make sure we're on the right. Um, that's it. Nice. We got to make sure we're on the right. Voltage here. We are not just right on the side, which is great. But it's also one of these giant power supplies like the old Ender-3s came with. So I don't know what model doesn't really have a make on there. So it's definitely not mean well. Let me shoot back over here. So next we have the glass longer plate here. Um, got to show Sherry some love or Geary some love. Yeah. Oh, that's right. I should make a Geary emoji. That'd be cool. Yeah, uh, that would be cool except for Geary is no longer on my channel. So no one could use it during the stream. No one could use it during the streams. But it would be fun. Jerry. Oh, not Jerry. It's happy birthday, Jerry. I think that's Jerry with us. Happy birthday. I think you thought he was talking about 3D printing and painting. But it must be a different, maybe a different Jerry. So this is a glass plate. It didn't have, it just had like Saran wrap on it. It didn't have like a nice peel off plastic. Oh, yes, it does. Ooh, I wonder if you have your special music, you know. Oh, I have the special music. Oh, wait, wait, wait for it then. Okay, I'll wait for it. What happens if you fire up a PSU set to 220 in the USA? Not, not a ton. If you do it the other way, it doesn't go very well. But over here stuff just doesn't, it doesn't do. It's not exciting like it would be for you. It might power up, but it doesn't work very well. Like Shane just said, if it does power up. Okay, this is the longer plate. It's glass pretty much like everybody else is putting out. It looks like Tony is probably absolutely correct. You ready? Ready. All right, so I'm just going to do it from here. So this is, this is for you guys. Here you go. All right, let's do it. Oh yeah. Oh, careful. Slow down there, Ty. Excuse me, I was dipping to something more comfortable. The video you did that on, Caleb has so many comments about that in our areas. That's awesome. Someone recently commented. I think it was yesterday or something that they subscribed just because of that. Perfect. That's perfect. I love it. So Caleb's with us. If you didn't guess that, he's hanging out with us because I'm not paying 100% close attention to the chat. Oh, which is funny because neither am I because I'm editing. I'm paying more attention than I thought I would. Yeah. So we have some that Ty is not going to play with. So there's zip ties, Allen wrenches, a wrench like normal, some extra stuff. That's pretty cool. A little extra stuff there. Classic spatula. It did come with a SD card here or a reader and a little micro SD of a very, very, how do I want to say this without getting myself in trouble? It came with a very generous, very generous helping of filament here to test with. Okay. It's a sample. I like it. I'll just throw that anywhere. Yeah. Definitely. Micro Gruga. I've said I've seen some slow peels, but that one was definitely longer. That's a good one. So I'm going to put this bad boy in. It looks like we need to do some leveling, but I'm not going to do that yet because I want to set my limit switch here first. So I'm going to tighten this down. I'm going to do my normal leveling technique you see in every leveling video I've done. It does have yellow springs, by the way. Okay. LOL. He Chris Riley's the sample. I don't know what that means. Oh yeah, I threw the sample. I Chris Riley did. Is that what you're saying? Longer, less it's filament. Yeah, the filament was a shorter, that was definitely a shorter sample than we've seen in most of them here. Shane, that's a why even bother him out. Any hidden projects behind Jim? Yeah, there is. Yeah. Actually, this right here, that's a seed maker resin printer. Nice. That's really tight. What? Get it right. Get it tight. So that's a seed maker video coming soon. Don't forget, Monday we start a contest with filament. I can't tell you what the print theme is, but I can tell you it starts Monday. All you have to do is print something, tag specific in it, specific people in it, and you could win one prize. There's $500 in prizes. I'm the first guest judge, so thank you so much for having me. And I can tell you, if you use filament or resin to print whatever it's going to be, Monday it'll be released, then you can actually win more. So that's pretty cool. If you haven't tried filament yet. $149.99, Matt B, I might have to check that out. At first glance, it's with the LK4. I thought that comment said he just found this printer at IKEA. And okay, I don't know. I don't know where I'm going with that. What we got? What was that? Is that you? What was what? I don't know. You didn't hear that? No. Okay, good. It was part of the utter. Some crazy, some crazy notification in my ear, and I don't know what it was. So real quick, I'm going to pull the pretty excited about your filament order. Yes, Steven is going to be checking out the filament contest going up. $149 worth just the parts. Yeah, I need to check that out. So is that on Amazon? Anyone could tell me. So let me know if that's on Amazon. I'll jump on and I'll create an affiliate link quickly. And you guys can check it out. That would be awesome. Then I could post that real quick. I know he said he was going to give me a discount code. If you were wanting me to do that somehow, because I don't know how to do that. Whoever got a notification of the longer LK4, the LK4 is on sale. This is the LK5 Pro, so a different machine. Someone said, wait, just realized this was a live video. What? Just testing my Z switch here. See how that goes. It can be close. What I probably need to do is back these off a little bit and then check it again. Tempted to get a CR30. They're awesome. I unfortunately, I haven't had a ton of time to play with mine, which I need to do. And I have two of them. So maybe this week I'll get my second one bumped open. So I have a fun project coming up with the CR30 that one of our new sponsors, Coax, is going to, I'm going to work with them, I think on some filament for it. Because it could be a lot of fun. I just don't want to crash this bad boy. Waiting till BF. I don't know what that means. Uh, that's where I want it. Uh, I think giving away a CR30 would not be good because the shipping would be ridiculous. We could. All right, here we go. We get a power cord. I got one hour left so we can get this bad boy fired up. Hopefully leveled. Oh, Black Friday, got it, got it. That makes sense. That was awesome. It took me a little longer than normal. All right, before I power this thing on, I'm going to grab some of my vitamin water here. If you're just joining us, welcome. Let me know what you're drinking into the comments below. I got my vitamin water. Steven, you're right on that one. All right, here we go. I have powered it on. I'm going to try to not let it fall off the front of that table. I'm going to try to get a better view of this screen for you guys. Not doing a great job over here. That is no fun, is it? The time where I have lights. I feel like I should be playing the elevator music. Or clown music. So it is a touchscreen it looks like. I know Angus commented that it's very close to another brand. Tough getting hold, yes. All right, here we go. Let's go over to this bad boy. And it says, guessing we have to home it. Very, very good screen. That worked out well, huh? You do not care over there? Oh, did I lose you? Yeah, it's black. Screen, go black. Black, black. There was a reference to the right of the Skywalker. Anybody was wondering? Weird. So. We lose both screens. What was that? Yeah, both cameras. Just take the lens cap off. Funny, funny guys. No, we did not have to censor a crotch cam. No, the printer went to home. And then the screen went dark and my cameras dropped. Wait, something the printer did turn your camera off? I don't know. All right, I'll bring up the elevator music. The edge of tech will return shortly. We're having technical difficulties. Does your camera overheat? Are you, were you trying to live stream using, were you doing 4k through the camera? It should be. Can you hear me still? Yeah, we can hear you. The printer went to home. Yeah. And it blew the, it didn't just blow my power strip I had it in. It blew the breaker. Oh, oh, so the camera is on. It's just dark in your garage. Oh, no, the camera is off because I have it powered through the same power strip. Oh, gotcha. Welcome to the edge of tech after. That's not awesome. Did I say it was awesome? I'm sorry. Sorry. It's not awesome. You heard it here first, folks. It is not awesome. The edgiest of techs. Play some music. Let's just play some music. Make it less awkward. That's too exciting. I'm going to go back to the elevator music. Too exciting. This is uh, Very exciting. Unprecedented. Oh, play the sexy music. All right. I got this. Hang on. Where's that? Fuck it, head. That soiled baby diaper. So many sound effects work so great with the sexy time music. It's great. Sad, strange little man. We have a picture. Have you tried turning it off and on again? It actually blew a GFC icon. So is it okay? So is the printer using like some sort of uh, capacitive isn't the right word? Like is there an electrical signal going through the nozzle when it homes? Did something short when it was homing? Is that why it busted a... I'm not sure. It's not sense. But you have uh, you have a... Exactly. Too much Pew Pew. Too much Pew Pew. No, uh, you can see me now, right? Yeah. So I plugged this in like I do underneath. And when I hit home, it started to home and everything went out on the printer and I didn't realize it, but then it took out the whole power to my desk here. So my test bench, it took out basically where this is plugged into and it went back and blew the GFCI outlet. So let's not do that again. Let me grab power from uh, not here. So I'm not looking at... Let's see. I had to go behind my projector screen to get to the... To the fun. All right, I'm back. Woo-hoo! Anybody else? I love you. William, uh, that's a great idea. Hey, yeah. So I'm gonna grab uh... That's fantastic, William. Just leave it playing in the background the whole time. Nobody acknowledges it. So I'm grabbing power from a different location here just so we don't have that issue again. Become a member on the channel so Jim can keep the lights on. Yes. No, uh... Membership's good. Light is better. I'm back, not so much. All right. I think you already talked about this, but people are asking if you have the voltage set right. I do. Yeah, it's set correctly. I double checked. Okay. Yeah, yeah, we're definitely not scripted today. Matter of fact, Caleb can attest a lot of my videos aren't scripted. That's why it takes a longer to edit. Yeah, this, the filament one that I'm chopping up, it very much feels like we took a step back a couple years to like the early days of when you were doing videos where there's like 12 takes and most of them are bad and I don't know which one's the right one. Yeah, I just let it fly on that one. Yeah. Uh, the one I finish is usually good. All right. Yeah. You can see the screen now. All I did was try to home this thing, so we'll see what happens here again. We're at 14 members. We're trying to get to 25 by the end of the month, so feel free. If you have an extra couple bucks to jump in, we'll, we do the member only stuff like we did today. And yeah, have a lot of fun. You just see videos early as long as we get them up early. So, Roger's. Thank you. Right. What do you say? He don't own five bucks and said become a member and help dude keep the lights on. Yes. Thank you so much. So this is trying to adjust the nozzle temp not so much. This is a very interesting touch screen. Oh, you can't touch it? I mean, you can touch it, but it's not responsive. I can touch it. I just don't, I mean, every time I touch it, I don't know if you can see right there, but every, oh, you can't really see, but every time I touch this, the temperature goes up and I'm not going to sit here all day and touch this till I get to, you know. Can you hold down on it? Same thing. Well, wait, I can't touch this. It's got to be a better way. I'll have to look in the instruction manual. But for now. RTFM. Let's go hit the, uh, remove. You got movement. We home all. Yeah. Why not see what happens, huh? Yeah, it didn't home, it didn't home Z. Oh, you know why I'm an idiot and didn't plug it back in. All right, let's try that again. I adjusted the ZN stop and didn't plug it back in. Now it's plugged in and still not do anything. No black video again. That's good. Looking good. Printer just turned off. I just turned it off. Oh, that would be why. I'm going to measure these. It could be the camera angle or it could be that you're absolutely right. The x-cantry could be sagging on that side. Yeah, it definitely looks like it's at an angle. I could see it from my screen. Yeah, I'll measure it. I'll check it. What's interesting is all I wanted to do is home this bad boy. And, uh, it goes up. Oh, it's it's raising the Z and not dropping it. It sounds like it sounds like a limit switch might be like. Yeah, we'll get back in just to be safe. Yeah, it's not lowering. It's definitely not lowering the Z. So if we spin this around, this is where the end stop is. Right here. And it, uh, I've checked it a couple of times. Unless it's disconnected at the board. But the trips, I hear a click. A clicky clicks, but, uh, it doesn't move. Yeah, it definitely clicks. But if there's a short, like in the like if there's an issue with the wires or something that where it just thinks it switched all the time. Yeah, true. Or whatever blew the, I wonder if it would pop whatever blew. Oh, the first time or something. If it lets you hammer in G code into the screen, it doesn't. I don't think we can try. Let's see. Print, no utilities. Nope. Fix them, dude says GM is triggered. Oh, look at this. It's actually going down when I go to leveling. Okay. But that doesn't mean that I probably should watch this, huh? It doesn't mean that it's going to stop at that switch, huh? Hmm. It did. That's odd. All right. We're good. We're going with it. So it actually stopped at that switch. It's just homing doesn't work, but weird. When I hit the level button, uh, you know, there's that. Let me grab a better piece of paper for this. Yeah. The x-grantry is still looking a little sus there. Yeah. Oh, yeah. Good one. Good call. If I'm not leveled, it would check that out. And by a little sus, you mean a lot, right? Let's check it out. Just through, I was, I was working in here last night. I piled a bunch of crap because I was trying to put this air conditioner in because it was 90 degrees in here. And I didn't clean it up yet. So I got 81 on that side. Just out of curiosity. Oh, it's not going to be the same because it's interesting. It's actually, I'm going to do this this way. Just out of curiosity. I'm going to raise this bad boy up. What's up, everybody? All right. Can't touch this. That's right. The x looks super skewed. True story. I'm not a fan of hitting this button 17 times or like more than that. So each time you want to do anything, you've got to hit this touchscreen button because it's a touchscreen. But I, yeah. I'm going to let that raise up so you can see it. That dad, my dad made a table that was lovingly called wonky wonky. I like it. I like it. Big blue. I'm not sure yet. We haven't got that far. Just putting it together and checking it out. 30 minutes. Yeah. I wish the touchscreen was a little more responsive. But we got it, we got it out of the box, like the shipping box. And it's currently assembled and turned on and moving. That's pretty not bad. That's true. Yeah, I mean, that's, you could definitely ask for more, but you won't get it. Wow. So I got 60 on that side. Just check it into the top. And if you guessed 63 on that side, you would be right. So we need to crank this bad boy, soldier boy. And I don't know. I haven't dug into this thing enough to know where to loosen to crank it. See if we can, we'll use brute force and see what happens. So this is actually why, especially on a printer this big, I would highly suggest. So 60 now there, 60 there. So it's straighter now. So that's good. Let's see what happens here. When you hit the homing button, Z doesn't come down. Brian, how are you? Yeah, brute force. What could go wrong, right? Look at this. So I hit home the Z and it actually is bringing it down. But when I hit home all, it doesn't home the Z. That's pretty funny. I could. I'm hoping maybe we can upgrade the touchscreen. A big hammer. Yeah. Brian Baker's with us. Hopefully it's nice weather up there. Brian, we're going to see. That might be Stephen. We're going to find out actually, it's homing now. So that's good. David Wilson, very sore. I'm getting through it. We're getting through it. I appreciate it. Firmware might need an update. That is the thing. Who knows how long this one's been in the box. I have not explored that yet. A lot of times, especially when I do these, we just go for it. Right out of the package. We'll send it, right? And maybe there is a firmware update. Maybe it fixes that. That's good info, Brian. This is the longer LK5 Pro. Have you guys played with that one, Brian? So I don't know if you guys know Brian. He's from a channel also called the First Layer. So if you haven't checked out that channel, go check out his channel. It's great. So it did home. It didn't crash. That's good. So let's try this again. Let's go back. I don't have a long because I have a hard stop at two. Brian, thank you. Hey, Brian. Thank you, man. Why is it a taco now? I changed it. It's a stomping taco. Thank you so much. Well, okay. I like it. So we're going to check out the leveling real quick. The Z looks much straighter now. So that's good. Get in there that way. Here we go. So I'm going to do a quick leveling, and we'll see if we can get some filament flowing, and then do a giveaway. But thank you so much, Brian. I really appreciate it. Again, you've got to check out the channel Brian is on. It's called the First Layer. Very good channel. They do a weekly show, helping pretty much answering your questions, which is awesome. Someone says I'm hungry for tacos now, but we should definitely do another hangout. We could get you guys on if you want to be on HotMakes. Just let me know. I would love to have you guys on HotMakes again. Yeah, manual leveling. True story. Yeah, Dean is correct. Brian and Richard, very good people. So there is buttons on the touchscreen that allows you to just press a button and it moves around for you, which is awesome. So I know I asked earlier, anyone else out there going to Murph? Let me know in the chat if you're going to Murph. Yeah, you definitely, you guys run an episode quite a long ago. We'll definitely need you on again. That would be awesome. Thank you. I appreciate that. Yeah, let me know if you're going to Murph. I'm going to be there. I know attendance in person is limited. I think to like 500 people, but I'll be there with the GreenGate 3D crew. I'll be there. GreenGate 30 and things and Caleb's not a cat. He'll be there. I'm here live. I'm not a cat. Nice. 3D medic Vince is going awesome. Dan will be there. I'm going to go around a couple of times here. Nice. Buddy and I will be driving down. Nice. Buddy your dog. That was a good joke. Second shot today. Canada is a bit behind 2022. That will be awesome. I'm looking forward to that, Brian, as well. Cat meme reference on point. Yeah, thank you. If it was Northeast Tycho, yeah. That's IRF. You know, manual leveling is not bad. It just takes a minute. Now these are the yellow stronger springs. So hopefully when we get this dialed in, I won't have to do this too often, but sometimes I wonder if it... If you're 60 years old or not in the medical profession, no vaccine for you. What? Oh, nice. Shane, are you going to bring the artisty? I don't even know if you ever got that working. For some reason, they changed some stuff from the pre-model that I had to what they actually put out and it didn't go well, I don't think. So I'll be there. I'll be hanging out. I'll be... If I'm not walking around, you know, I'll be at the Greengate 3D booth where we're going to give away my Ender 3 v2. One you just saw in the easy ABL video actually. So it'll come fully updated or upgraded already. Which is cool. Thank you guys so much. I just realized Nightbot was on, so there's that first time I saw that today. What? I didn't see Nightbot. No? No, I don't see Nightbot on here. I see it in the chat in... I see it in the chat on StreamYard. You're right, I'm not seeing it on YouTube. I don't see it in the chat on StreamYard. I know. Where do you... Whose comments do you see it between? Quinton says, an altered proxy says, so would you say that printer takes longer to set up? There it is. It just took forever. It takes a minute. I think any printer that has manual bed leveling... Oh my god. It takes a minute to get going. The lawn care people just showed up. That's awesome. Can you hear that? No, not really. Oh, okay. I figured you could. It was really loud over here. You checked the center here. I see it on YouTube. Yeah, it took a while. I saw it on StreamYard for first. So the center must be dipped, because the outsides are all good and the center's a little loose here. But I'm going to leave it for now. I should probably see if there's a live Z. We'll find out. Otherwise, I'll be just adjusting on the fly. So here's what I'm going to do. I'm going to take the SD card. Ah, that's a good one. Find a device to straighten my hairs. It will be fire. Three versus a light box. Yeah. So just so you guys see this on the longer... Okay, five. It is on the side over here where you plug the SD card in and it goes in upside down. It appears. Yep. So it goes in. Oh, okay. Sorry about that. Goes in right here on the side in the back. There's a USB and then that right there. It would be awesome to pre-level at the factory, except things could ship during shipping. And then if they shift, you got to do it anyway. All right. I'm sorry to hear that, Stephen. It appears. This has a filament run-out sensor on it built into the extruder up here, too. It is a plastic extruder. There's that. So I'm going to grab some Coex 3D filament. Thank you so much, Coex, for being a sponsor of the stream today. I'm going to get this in here and hopefully get the test print going. And then we got 15 minutes to give away some stuff. There's mine. You have a checked out Coex filament. I definitely suggest you do that. There should be a link in the description. Currently, it's not an affiliate link, but those guys are awesome. I love their filament. It is extruded in Wisconsin here. Yes, Brian has that. Absolutely correct. Caleb, you're experiencing the Edger of Tech. I read that as the Edgar of Tech. Yeah, I saw that, too. So this is Coex PLA Translucent Blood Red, PLA Prime. Just awesome. Hey, quick, quick, quick. Later, Quinn. Thank you so much for coming out. We appreciate it. We'll see you on the next one, hopefully. I'm going to check it out today. Nice. So good stuff. This is all for videos on Merch. What was that? I was just telling them to expect a lot of videos from Merch. Let's see if I can. I can't even show that color off. It's so dark red. Let's see if this is any better. I need to get it. Kind of see it in a light reflection, but that is some awesome stuff. Oh, man, surgery in 04. Let's just hope I just pulled a muscle or something and it's not required to have surgery because that will suck. No, I'm hoping you're better and everything is going good. One for BL Touch. You're always switching build plates. There's nothing easier than a BL Touch. If you're going to switch build plates all the time and stuff, BL Touch isn't a bad option, for sure. Oh, that was a good twist. But wait, there's more. You know what I didn't see? It didn't send a nipper. I just double checked with Tim and he's on board with being guest on Monday's hot make show still. Tim, I'm going to want to get together with you at some point to know what kind of details to send him. So I just figured out the temperature thing. So there's a, so I'm setting the temp. I got that figured out. It was just me. I couldn't see. There's white and there's green characters and I couldn't see the green characters from the angle I was in and they're very hard to see even straight on. But let me see if I can see if I can actually show you better. Meeting up everything now is where I'm going. You just see those characters there. So I couldn't see the green in the light from the side. That's the, that is fun, I guess. But I heard you Caleb. We have a pretty cool guest coming on hot makes on Monday. Oh, you can allow that. I'm sorry. It's hard to hear because of landscaping people outside. No, you're good. You're good. What do you think? Maybe we need to start all of our streams with sketching, with a stretching routine. Yes, so right before my last stream, I did a members only stream a little while ago. And at 10 o'clock my time and right before that, I bent down to grab something in my back just went kink. And it, it sucked. So it's been real tight in. Yeah, I just say it's been really tight and it sucked. Okay, so I'm just going to load some filament. H Colorado, if it was me. Some touch screens are, are good. But in my opinion, the manual screens, uh, the manual screens, uh, are better. Lindsay just chimed in. Tell them what really happened. That is what happened. I went, I bent down to pick something up. But what I'm not telling you is something was, was the toilet seat. Yes, I bent down, lift the toilet seat, Lindsay's bathroom. And, uh, that's how I hurt my back. But now that's that. That was awesome. Thanks, honey. No, it's okay. I should probably get a lot of donations for that. Do you really want to call me honey in front of your wife? Uh, honey, I'm going to tell it to start printing a whistle. And we'll see what happens. Oh man, we'll get on with the, uh, we'll get on with some giveaways. Uh, we'll just say I couldn't move very easily. Yeah, you're welcome, she says. Now, as soon as this starts printing, we'll see if there's a live Z-adjust. Nothing better than meeting Linus from Linus Tech Tips and Gavin from Rooster Teeth as a 20 year old guy moving like an eight year old. Yes, I can't see. I don't think, uh, Lindsay hasn't been on any of your videos recently, has she? No, there's a reason for that. Kobe, uh, Pacmire, uh, just donated five fund to, for, uh, to help with the fund or replace your toilet seat. Ah, honey, all I did was I just tried to lift it in my back twitch. Geez. So, it's the best. Thanks, thanks, honey. Uh, so, so on the screen, it tells me a height and there's a tune button, but there's no, no way to tune up in the Z live. So that's, that's awesome. Got to keep it real. Thank you. Yeah, thank you. What? No purge line in the demo file? Absolutely not, but it is printing a whistle on a raft. So we'll probably be okay. Uh, all right. Whistle on a raft is my new band name. Yeah, whistle on a raft. I'm going to pull this aside. We can watch it print over here. We're going to give some stuff away. Hey, there were some road bumps there, but it's pretty impressive that you went from shipping box to a printing printer in two hours. And I talked a lot to that. Oh, yeah. But yeah, it's, you know, uh, I think it's a lot easier. These days to do that. I mean, I should, we should do a live stream. I should buy a new, I should buy an Artemis or something when I go down there for Murph and then do a live stream, uh, putting that together. It'll only be like 30 hours or something. No, it wouldn't be the Artemis. It's like, I don't, first of all, I don't know if they're still, uh, I think they, I think they just discontinued it. Right. Yeah. I think so. Yeah. But the Artemis is like, You can get one at a steal. The Artemis was almost completely assembled. I would know because I, I would help with the assembly, like I was helping to build them, but you would basically have to put in like six bolts and plug in a few things and it could print. That was pretty much it. Got it. Well, how about my, my roast dot, my max three down there. Uh, you know, v three down there. Um, yeah. Oh, I lied. I lied before. Oh, okay. Um, that, that took a minute. I have the footage still. If we want to, we want to edit that. It'll only take you probably six weeks. I like this. We need to make a t-shirt. There's a lot of great comments. I really appreciate that. This comment. I need a toilet sheet seat. What was that killer? Can you see a DC stream yard? Yes. Yeah. The comment that I just threw up on the screen. We need to make a t-shirt. Yeah. Yeah. That is funny. Someone says I needed a powered toilet. And then I think Lasto says normalized leveling, normalized leaving the seat up. And the cats would drink out of it. Lindsay said. So, uh, let's see. Just got an under three feet. You delivered. Can't wait to have more 3d printers with me. What is the next printer you suggest? It depends what your budget is and what size you want to go for. You want to go for smaller, cruise some mini all day. That thing has been solid since I got it. Bigger. Man, there's so many bigger ones. I really like my Ender 3 Max, which is very similar to your Ender 3 v2. Actually, I have a video coming soon that I put Autobot leveling on that, just like I did with the Ender 3 v2 recently. That's a solid printer. CR 30, if you want a belt, that's been awesome. There's so many good ones right now. Oh, let's see. Let's do this. One time we got 53. I like, uh, grabber cloth thingies. Yes. It's like I do that. Ender 3 as the frame and mod all day. You could do that for sure. Um, all right. Let me just double check two things real quick while we're talking. Number one, I need to know how many roles I'm giving away. So I'm going to check that. Number two, uh, what countries are eligible? Just in case you told me specific countries. And, oh, 400 rat rig. That will be awesome. Oh, this is a rat rig. Shane's cat will be in the shower. All right. A rat rig? Yeah. It's a, I'm assuming he got a kit, but it's a kit printer kind of, I don't know how to explain a rat rig. Everybody's building all these different printers lately. And rat rig is another one of them. You can bring it up too, but Brian's working on a 580, 580 by 1000 for on 2.4. Whoa. Woo. Everybody's doing a voron. Everybody's doing vorons. Rat rig is similar concept. It's a kit about a two of the three week kit. It says, holy crap. Very similar. Yeah. To a voron. If you haven't seen the voron kits, they're very popular right now. Hey, Lindsay is a little man sleeping, by the way. That'd be good to know. It's a rat rig is a CoreXY, but the bed can be auto leveling. It's really cool. Nice. And rat rig sells the kits, which is good. All right. So, hey Caleb, real quick, while I am going to dig for this email real fast to see how many roles we're going to give away, I just want to talk a little bit about our sponsor, Thangs. And I'm wondering if you could just roll the longer promo for Thangs. It's only like 30 seconds, so it doesn't give you much time. Perfect. Don't forget, this video, live stream, sorry, has been sponsored by Thangs. Thangs, thank you so much for your sponsorship and we'll roll your promo. Let's do it. I'm going to jump in right here and tell you today's episode is being sponsored by Thangs. Thangs is the biggest growing 3D community with over 2.3 million available models already. One of the really cool models available at Thangs is the new Wexter Mini Gym. If you guys have not seen the Mini Gym that Wexter designed, all you have to do is type in Mini Gym. You'll find the STL exclusively right here on Thangs. You can download it and print it for yourself. Thanks again to Thangs for sponsoring this video. You can find the link in the description below if you want to check it out. Now back to the video. That was fun. Well, thanks again. Thanks again for Thangs for doing that. Also, a mini pooch. That would be awesome. We had the Mini Gym. If you haven't printed a Mini Gym, you should. If there's a mini pooch, it needs to be holding like a UPS box or something. Yes. So this is a big Mini Gym. And this is a Decapit Gym. Very desirable, collectible right now with no head. Bring one of those to Murph with you. I want to take one of those home. I will definitely do that if I remember. And use Decapit Gym. Yes. If it was, is it hollow? The Decapit Gyms are not. And that's why they're Decapit Gyms because I forgot to add more resin. Dang it. That would have made a funny shot glass. It would. All the way. All right. So we got three rolls of PLA. So what I'm going to do is to do it this way. What I need you to do. You mean? It does. Hey, so in the description right now, there's all about 90 of you guys watching right now. So not in the description. In the chat, we saw a little bit about this printer. We saw that it has a touchscreen. It's 300 by 300 by 400. It's actually not too bad to build if you're just going to straight build it. Probably 20 minutes, maybe 30. Tops, but 20 minutes to build it if you're not being slow. We saw that we have the coax. The coax, the translucent blood red filament printing on that. Thanks to coax for sponsoring this live stream as well. You know, let me know a positive. What do you see that's positive about this printer? Type it in the chat right now. I'm going to start collecting comments. So all you have to do is type in the chat. Let me know something that you might like about this printer. And we're going to pick some winners here. I love Brian's idea of turning a decappa gym into a little succulent planner. Yes. It'll look like one of the crab heads or whatever. And he's going to print a mini gym next to a troublemaker Arnold. I like it. We could make a chia pet decappa gym. I could probably slice this one to cut my head off and then make it hollow. It has drain holes in the feet for your water. I still think you should have put the drain hole. Ah, yeah, yeah, yeah. That's pretty funny. Brian, I like that idea. Hey, you know, you know, you've made it big when Webster makes a mini of you. You know, that's, that was, you know, I don't know if I can go any higher than that. Oh, hey, Robert George is here. Robert George. Yeah, I think Robert George is one, I think two of the gift card giveaways in the past. Nice. Hot makes episodes. Yes. Yes, yes, yes. Brian Baker, if you jump on things, use the description in the link or link in the description below because it tells people, tells things I'm sending people from the stream. But if you go to things and just type mini gym, you'll find it and you are free to modify it if you would like. So Wexner gave me the file to play with and post myself. What do we need to do to win? That's it. You just have to comment something you like about the printer. It's now printing the whistle, which is on a raft, which makes a lot of sense. We got 57 entries. I'm going to give you guys about one more minute. So all you have to do is type in the chat right now. Be eligible to win. The hidden power supply, yes. You like the size, awesome. You like lower school position for stability. I like that the school is angled and secured to the top. That's a nice thing. Z-access bracing, someone said. Sturdy frame for bigger projects, yes. The raised feet is nice because you could put like a nice tray under here if you really want to. But actually, I mean, it keeps everything nice and open air wise. There is a control box in the back that houses your board and does have a fan in it. Three piece construction, pretty much. Squirrel, perfect. The weight, it's a little bit. I mean, it's actually not bad for a machine like this. A build plate looks flat. It is off the test that because I leveled the outsides. And when I got to the center after going around a couple of times, center was a little low, but we'll check it. Angled rods, cute little legies. It's definitely quiet. Of course, I have an air conditioner blasting the back of my head. So there's that. All right, here we go. We are going to draw right now. And I forgot to share the dang. Fail. I was wondering it. Fail. Jeff Hutchins, Jeff Hutchins, let me know what country you're from. Because I believe I screwed up and didn't tell you what countries could win. But there's a bunch of countries. I think we're all here. So what I was told is Europe, USA, Europe, Russia, Australia, and Canada. So I think we have representation everywhere. Jeff, let us know. Canada, Canada. Perfect. So Jeff, I need you to email me when we just do this. Boom. Send me an email. Let me know that it's you. And then I'll get some information to you. I'll get your information to these guys for the winner. So shoot me an email, Jim, at the edge of tech.com. Well done, Jeff. Draw again. Here we go. Give it away three. USA, Europe, Australia, Canada. And what was it, Germany? What was the other one? Russia. Russia. Oh, did you take it out? There you go. So Kenneth, kind of shot. Nice job. Where are you from, Kenneth? He's in there. He just said congratulations to the previous one. I know he's here. Karma. Just let me know where. So yeah, Europe, Russia, the US, Canada, and Washington state. Nice. Congratulations. Shoot me an email at the email you see on the screen. And I'll get you hooked up with them. We're going to do one more. Here we go. Here we go. Here we go. What do we got? Sir, mate, let me know where you're from. What printer is that? It's the longer LK5 Pro. That's all I got to say. Yeah, it's a longer LK5 Pro 300 by 300 by 400, I believe. South Africa is also watching. Thank you. I really appreciate that. That's cool. Let's see. Sir, is he here? I haven't seen another. I mean, he had to comment to be there. Just said, where are you from, sir? Where are you at? Holmes. Well done. Let's see. Where is sir from? That's what we need to know. Sir, meta, meta. USA, perfect. Shoot me an email at Jim at the Internet.com. If you are a winner, I'll hook you up with the free PLA role. Congratulations to all three of you. Did you see your name flashed by? That is true with any drawing. It's like ding, ding, ding, ding, ding. Yeah. Yeah, we're going to let this go. I've got to get going. I'm going to go take care of the little man. I'm going to go take care of the little man and try to chase him around. And Lindsay has some stuff she's going to hang out and do this afternoon. But this is going to take some pictures and throw it on social media when it's done. It's printing a whistle currently is what it's printing. So we'll see how it goes in the end. Six minutes late. Yeah, you're right. I got one minute and 38 seconds for the from the stopwatch I started. So we're doing good. What brand of filament again? That's a good question. You're talking about the winner. The winner gets four rolls of, or I'm sorry, the winner gets a roll of PLA. And they didn't tell me what brand. It might be longer. Longer half filament. We'll find out. So you'll find out as soon as I find out. I don't know what brand because they didn't tell me. So I'm not sure if longer has a filament brand themselves or something like that. But anyway, thank you so much for coming. I really appreciate it. I got to get flying for the day. But check out membership. If you haven't done that yet, $2.99, I believe is the less expensive one. If you can afford it, $4.99 would be awesome if you can too. But we'll do more member chats. So we just sit down. We kind of talk to everybody and hang out, which is a lot of fun. So feel free to join there if you want. Also, don't forget, we'll be live on Monday night for HotMakes. We have a really awesome guest. We don't want to miss that. And check out the new HotMakes channel. Don't forget to go there. Shane says, yes, they have their own filament. So I'm assuming it's longer PLA. We'll find out. It's going to be longer than that sample they gave because the sample was pretty short. Nice. But don't forget, thanks. Thank you for the stream. I really appreciate it. Co-ex, thank you so much for this awesome filament. This blood, what is it? I don't want to make sure I got it right. Translucent blood red PLA prime looks phenomenal. I can't wait to get some bigger stuff printed. So we'll let this fly and we'll get some cool stuff going soon. But thank you, everybody. I really appreciate it. Not disappointed to take care of it next time. Yes, if Jerry has a birthday stream on, go check out 3D printing and painting. Sounds like they have. I got a notification for that earlier. Oh, nice. So check out Jerry's stream over at 3D printing and painting. It sounds like it's his birthday. So everybody, go say hi to Jerry. Everybody else, have a great night. Thank you guys so much. I really appreciate you guys coming. I said night, but it's really day. And we will see you again next time. We'll see you Monday for Hot Makes and keep printing, everybody. Have a good night. Thanks, everybody.