 All right moving on to the CV joint half shaft axle Everybody uses a different name. I'm gonna take care of this little Where is it? right here This rip crack This is something must have hit it this would not Just break on its own. It's too early for that As you can see the rubber is still pretty soft and this is Pretty thick stuff now. I probably would have gotten away without buying a new axle nut and new grease But This is gonna see some abuse Might as well do it the really right way. I should say Looking for some kind of a clip Maybe a C-clip holding this in place All right found a little Mystery clip. It's right inside this ridge. You can see it though. There it is. I need two hands To get that sucker out lose the balls and make sure you do this with gloves The grease will get under your fingernails and stay there for days Sometimes for weeks. Now we got another C-clip Well, this time it's a C-clip the other Clip I guess it's a spring clip don't even attempt to do this without one of these most guys Probably if the boat would have come out wouldn't know how long then it's a good idea to clean this Thoroughly make sure there's no dirt inside. There's a good chance when the boot is ripped open Or it's come out and something moisture water dirt got inside but in this case it was a little ripped and I didn't inspect the car before I left for the track day So no signs of the grease anywhere, so I'm pretty sure it happened during the track or Drive back Time to put it back together So when the axle is in It'll spin this way. So these cannot become aerodynamic You know what I'm saying?