 Hello everyone, just going to whip this apart and just show you how easy it is to adjust the camera angle. So instead of it looking down all the time, don't get me wrong, if you don't want to do that, don't do it. But for those who do, I'm just going to show you how an easier process this is. First of all, we're just going to whip off the props. Now, I've already done it and it does have a much better camera angle on it. The places where I need to check to see if that's going to be a problem is facing towards the sun because the angles, you know, the front, it's going to have a lot more glare going into it from the sun as opposed to it being pointing downwards, so it's giving itself a shade. Well, I'm hoping it's not going to make too much difference, but look, it's a very cheap camera that's going to be in here. It's not really designed, I don't think, for reality use as such just because this isn't the sort of thing you want to fly high. And that's what I mean. I mean, with altitude, not flying high. This is so small, you know, it's going to get blown around in the wind quite a bit. But I suppose all it sounds like probably is that I'm slating it, but I must tell you now, I'm not a car dealer, meaning that if I wanted to sell sand to the Arabs, I'd probably give it a good go if I wanted to. But for things like this, I'm not interested in trying to sell anybody anything. There's no affiliate links. There's going to be nothing. All I'm interested in is if I buy these little things, which I bought these for me, are they any good? And if they have problems, then to me, you know, if I go and buy a car, I don't care if it's the best car on the lot. I don't care what the seller is trying to tell me. What I want to know is what's wrong with it? Can I live with this thing? Yes, lovely. I can see it's got paint. I can see it's got tires and stuff. I want to know about knocks after you've been driving it for a week, after whatever you've put in the engine to quiet it down as well. I want to know about those types of things, you know, full steering lock. Does it do any funny noises, you know, crunching on ball joints or anything? These are the things I want to know. Someone says, yeah, it flies. Good. It's got a camera, it works good. It says all these things on the box. I expect all those things to work. I don't know what's wrong with me when it comes to this. I think it's because I've been stung. I think it's because I am bitter, because I've been stung. I've been stung by air. But I suppose I was stung, but I was lucky because I didn't waste my money. And I was only lucky because I didn't have any at the time to waste. But I would have done. I would have done. I would have bought that thing. The wizard. Eshing Wizard 220S. Back when it first came out. Oh, my life. Everyone raved about that thing. The greatest thing since sliced birds. And I couldn't, couldn't get into my account fast enough to order one. Couldn't get into it fast enough to order one. But I say luckily for me now, is that particular one that sold out? My great friends at Banggood. I can't get this one out. It seems to be just. Oh, it's come out. And yeah, so I didn't get it. I really wanted it. I didn't get it. And then within a couple of weeks, all these bad reviews were coming out about it. This is what I don't want. This is what I don't want to know anymore. I don't care if it's just come out of the box. I expect it all to be there. I expect it to work. No pats on the back for that. That's just the given. I don't know if it's now because we get stuff from China. It's like a big shock if it works or something, or if it's all there. I don't think that's how it's supposed to be. But in the UK, in my country, we have quality control and things before things come out in the first place. So you just expect it all to be there. But there you go. I mean, that's just different ways of doing things, isn't it? But yeah, very rarely get anything out of me. That's going to be overglossing or doing anything. Right, I'll show you what I did here. It's quite simple. All I did, I mean, I don't know if you've got any heat shrinking or anything. I don't know what the exact size of this is. I can sort of show you. Well, basically, it just comes in a, I hope I don't pull that off. It just comes in a, that's the blue, I think. And that's the white that I've used. I'm going to use white and blue, yeah. Because the first one, the outer, is a white one. And it's the only white size I've got. So whatever this is, I mean, it's not pretty big. I don't know at all, but measuring it, I don't even know. There's only tape measure I do. I've got two of them, but can I find them? They come in handy sometimes. But it's the standard stuff that you get, you know, but a heat shrink. And all I've done is I've used the outer one, because you can pull the camera out here. I don't know what to take all that out like I did before. Because this, they're just on these like little uprisers coming from the plastic itself, coming from the chassis. So what you're going to do is just get underneath there gently. I wouldn't, yeah, because that would just raise. I wouldn't try and do it all on the one lotion, like snap on the other sides. Just raise it up. There we go. And this will come out. Oh, that's nice. We get to have a look underneath there. This is where our power connects from the battery. I don't know if we can look this up, but we'll give it a go. Here's me meganing buying glass. I don't know if you can see it through here. I know I won't be able to do that. So I've got to actually look through here. I might need to bring my light down from the top as well. He's both of them. This is me old I have. It says it's XN29 7LBW. Low power 24 gigahertz GFSK transceiver. It's a short range transceiver clip, chip, sorry. So I can just pull up some of the specs. You can see this. Let me just, okay, so that's that. So yeah, that's what we got there. We got another chip here. I don't know what you can see or what you can't see. You can see the LEDs in my lamp. Oh, we're looking at it just by while it's connected to. Okay, that's gonna be some sort of like spy. Right, so let's just take a peek at what's underneath here as well. I think this one's got a bit more flexibility into the wiring. I mean, just have a little look what's underneath. Now, as you can see on here, there's a, I thought there was a parameter. There it is. Now there's a parameter. This here. So this is how it's keeping its level. And well, I mean, I don't know if which one that is, but I know that BPM 280, 290, that's spy connection. Okay, so we've got a little sort of LED gaze in there. Make sure there's nothing that we can damage. No, it's got a little tiny notch part on there. Bring this in a bit closer. I have to remember that the actual lenses for my camera on this phone are not in the middle of the phone. And it makes a big difference there. See that? That's what I did. Just did the outer part first and then put another one in the middle to make sure it got some solidness to it, but then very, very light. Oh, well, that's our power button. Yeah, so here's our antenna. This is the antenna for your control. I presume that this then is going to be dealing with, well, I don't know, because it looks like on the board. I'll take a peek at that in a minute so we can get the number off this chip, the idea of this chip. Oh, it's got no markings. Oh, tidy bookers. Let me just get a little bit on wipe. I guess they've got no markings. So I presume this is just control and this is going to be the bit that's got the information doing flips and circles and searching. And they don't want you to know what that chip is. A couple of little regulators here and just the momentary switch. Bunch of other regulators on the back there. That's it. It's not a lot to it really, is it? Not a lot to it. Now let's have a peek at this camera. See now what I did is all I've done here really is I've just got this bit to come out of here. All I did is I just got this bit to come out of here like that. And normally there'd be this in there that keeps the shape and keeps it at the tilt that it wants. So I don't turn the shooting across the place. Of course that's going to be on the outside that part and then the other part we're facing in. And see that's how it sits then and it keeps it at that angle to the shape of this really. As you can see that's the straight line and then we drop into this angle going down. So that's what I've done and then where the ribbon is at the back and that's what I've stuffed with this to push the bottom forward. So rather than it sits at that angle it actually gets it to push it up. It still gives it a bit of a cover from the sunlight coming in but of course, you know, the less, the more light they can get into it. You know, I flew it round. The reason why I put it in the dark flying it a little bit in the other video is when it was a bit of a slap together because I was getting a bit bored of doing it. And I didn't want to just push it off and start doing something else and was it never get done. And yeah because it was to also sort of point out without saying that the camera's not going to be really good in these highlight situations. Maybe I should pull up a video of the way I set up my timer with the camera in there and that was all right because I was flying it around in the sun for that amount of time with the camera in there. I'll tell you what this is a good for. This is a, it's going to just try and take a peek at this board a bit and just pull that through. I'm not going to, I can't, I'm just looking to see if I can see anything on this chip here but I can't actually see anything on that chip there. But I'm wrong, there is something on the chip so let's have a look and see what that is. 25L, 32, 33F. No flash, serial no flash. And near the two near the two and you've got nothing on them. You're not allowed to see those ones. Oh here's a nice chip in there first. Let me just pull that out the way of that. Let's just get that out the way of that. Pull that down there and see what's controlling it. This is a full hump. Put that in there. Can you see that? Come here camera. Can you see that in there? Oh there you go. HD web camera autofocus. So that's the FH86 V100 effective pixels 1900. So this is, well you know we're expecting it to be the camera stuff but that's yeah so that's the brains view on there. The camera gummings in there. But isn't that quite good because I'm just looking for the antenna for the R. Is that it? Could have funny feeling. I mean this is the antenna for the control for the 2.4 gigs but you've also got the Wi-Fi antenna in here. I'm not sure where those probably just you know built into this. Just can't see it. Oh I don't know what I'm looking for probably. More likely to be the case. I'm not actually too sure what I'm looking for. But anyway, so yeah that's what's inside there. Now let's take a peek at these motors because this is something I was, we've already checked this haven't we? Because I've got a bunch of other motors and I'm hoping actually that the other motors will fit in this one because this one has a different motor. These motors are all together bigger, wider and longer in here than these ones. These batteries even though they're only 500 milliamp or last it says up to 11 minutes but they definitely go for 10 minutes. Yeah these are 500 milli watt hour and 1.85 watt hour but they do last a while and that's with you know everything on the go. The camera's doing its thing. I mean it's not recording on there so that's going to save a lot. That happens in the phone. But you know I mean I quite like this. The only thing that gets me about it is the throttle is very twitchy. You know it's quite hard. Look at my fingers on this look. I've always got to try and do it like this and there's not a lot of movement there. My joints it's probably very good for small hands probably but again when you've got full, little tiny bit of this and it's full speed on your, that it's full speed. There's no difference between doing that and doing that which you know we know that when you're yawing you don't want to do it so it's just the blur. You want to be able to slow it down and get that nice. That's how you get your smooth when it looks like it's just gliding nicely. You slow it down. You slow it down into nice. So there you go that's the inside of that. I much prefer the longer stick and the more control on the slower yaw so when you're doing your figures of eights and stuff you know you can do it nicely rather than up and down and up and down.