 Γεια σας! Είμαι Vicky και καλύτερα για να φτιάξετε 8. Σήμερα είμαι ευκολογημένη να σας δείξω τα 8 καρδιά που έχω φτιάξει με τα τελευταία εργασία από τα μου ευκολογημένοι. Για την πρώτη καρδιά σήμερα θα χρησιμοποιήσω αυτή η καρδιά και η στάμψη και θα χρησιμοποιήσω το τίποτ, ένα κομμάτι της τεκάψης, το μπανάνα, το πλαίτη και τα μπιτσότητα από την στάμψη αλλά θα χρησιμοποιήσω όλα σε ένα διαφορετικό κόλλο. Τα λίγη ευκολογημένοι που χρησιμοποιήσω είναι από τα μου ευκολογημένοι και μπορείς να δεις τα χρώματα που χρησιμοποιήσω στον σου σχέδιο right now αλλά όμως θα βρείτε την πλησία των όλων των πλαίτης που χρησιμοποιήσω今日 εγώ στον κομμάτι της τεκάψης. Τώρα θα θα χρησιμοποιήσω τα τεκάψης, για να φτιάξω μια καλή εμπραγή και θα χρησιμοποιήσω την πλαίτη μου για να κάνω. Ξεκίνω ότι εδώ έχω χρησιμοποιήσει κάποιους εμπραγές αλλά έχω κοητέρ Harold permissions but there is a stamp for a layering stamp for the banana that i am going to place exactly on top of it and then i am going to stamp again and this is going to add the shadows for the banana top and the bottom which makes it look more realistic. Τώρα είναι ψ απο τεχνικά να κάνω Reid cutting and as you can see there is a tie that cuts out self and i am going to use this couch ότι will be red to assemble my card. So first of all I'm going to work on a white card stock that is slightly smaller than a standard card and as I need a little bit of something at the background but at the same time to be very subtle. I am going over it with my stressings and then I'm going to use that die to cut out the cells. So you can see here I have already placed everything all the little dies on top of the images για να είμαι very subtle. Είμαι καλύτερη με κάποια δυστρασία, με αυτή τη στενσία. Αυτή η στενσία που έγινε was released by my favorite things last month. So now I'm happy with how my background is looking and all I have to do is to stick all the images on top and create my kitchen wall. I'm going to use some gloopen at the back of all those images and start sticking everything down and this card really came out very quickly and what I love is that most of the stamps in the stamp set are actually solid stamps so they don't have wide open areas that you need to color with your favorite coloring method. Instead you just stamp and you get that color inside. Really quick and easy to create cards like that. So as you can see I have used my craft knife to create some slits in those cups so that I can put one inside of the other and since they are so bulky I am adding some strong adhesive at the back and I'm going to stick them just next to the pot and continue sticking everything down. After sticking everything down it's time to add the sentiment so you can see that I am chopping the sentiment in half. This says happiness is handmade and it comes from the stamp set that is called You Bake Me Happy. I have stamped the sentiment with black ink and now my panel is ready to stick on top of my card base. My card base is a top folding card that's a standard card that's 4.25 x 5.5 and I'm going to stick my panel on top with some foam tape at the back. At this point the card is ready but you can go ahead and unbelly fit as much as you like. You can add glossy accents on the plates, on the teapot and the cups but I decided to go just with a clear wink of Stella to add a touch of shine. Now let's move on to the second card and for this card I'm going to use these adorable otters. I'm really in love with this set and I'm really happy with how this card came out. First of all I'm going to choose some of those adorable images and I'm going to stamp them with black ink and from the stamp with the owls I have chosen the little heart to stamp as well. I have a fish, a heart and two little otters. Now this is going to be a birthday card and since I'm going to use my alcohol markers to color everything I used my Memento Tuxedo black ink to stamp my images. So I'm now going to do my coloring and then use the dies to cut out everything. I will end up having two hearts at the end, two fish and two otters. Now I have cut out everything and I'm going to use this parchment paper to be my sea. This is actually a leftover from my kit that I had by Simon's stamp. So I'm going to make sure that I stick this die nice and straight and since this is not that big I'm going to make sure that I continue that wave. You see how I place it making sure that it is a continuous line. I also check at the back and then I'm going to cut again and this is going to fit perfectly in front of my card. So this way I have the sea on top of my card but at the same time the sea is transparent so if I place something at the back you will still be able to see it. Now in the dies there is this tiny little wave die that you can use to cut a slit inside your sea so that I can put inside that otter and I think this is looking adorable and at the same time you are not losing the detail on all that coloring in the otters. If that was just blue paper you wouldn't be able to see what's underneath. So I'm really happy with that idea and I'm going to place two of them in the sea and I have already cut out another slit where I'm going to place the fish. I have two fish, one is orange and the other one is green I believe. Now if you stick that directly on top of your card base by placing your tape all over you will be able to see the tape and it's not going to look good. So I'm covering up the tape only behind the otters. This is enough tape to stick the parchment paper and the otters on the card. I'm going to place the last fish on my little scene and now the hearts. Now again the hearts are not from the same stamp set with the otters they came from the owls set. I'm going to stick one with foam tape at the back and the other one is going to go flat directly on my card base. This is going to add a little bit of dimension and those hearts are actually going to be balloons. So this is going to be a birthday card with that little otter sticking his hand out of the water and holding the balloons. Now I am going to decide which sentiment I'm going to stamp and I'm going with the one that says Otterly Great Birthday which I am going to cut in three parts so that I have Heve in the first row, Otterly in the second row and Great Birthday in the third row and as you can see I am going to do some coloring in the sentiment. So for the word Otterly I used Tropical Teal this is a color by my favorite things and I think it matches perfectly the parchment paper of the sea and it completes the card. Now all I have to do is to draw the strings for my balloon so first of all I'm going to do that with my pencil just to make sure that I'm happy with how those lines look and then I'm going to go over them with my thin black marker. Now of course you can go ahead and embellish your card even more like add glossy accents on the balloons I decided to go just with my clear Wink of Stella glitter pen but I couldn't leave those noses of the Otters alone so I just had to add some gloss on top of them Aren't they super cute? I think this is a must-have stamp set. Now for this card I'm going to use this stitched hard grid and you can see that it consists of two parts for the first part I'm going to place it at the center of this white panel I'm going to make sure that it's nice and straight and then I'm going to pass it through my scissor machine but this is not going to cut out anything instead it's just going to place the grid the stitched lines on my panel and with the second die I'm just going to place it on top of this red cardstock which is going to cut out this grid that you can use if you wish to or you can use the hearts in this case I'm going to use the hearts but for the grid it's going to I'm not going to throw it away I'm going to use it as a template for exactly where to stick my hearts so I'm placing it on top of the grid and this way all those stitched lines are exactly at the center of those lines of hearts so I'm going to stick one heart after the other and while I'm sticking them I just add glue at the center of those hearts so this way I can add a curve to the hearts so they stick out a little bit and this way it's going to add a little bit of dimension once I stick everything down I'm going to remove that template at the top and this is going to leave me with all those hearts looking dimensional and they are exactly lined up with the stitched grid on the white cardstock now I want to add the message at the bottom of this panel and for that I'm going to use the well connected alphabet and I'm going to write sending love but to show you how I'll do that just to make sure that everything is nicely placed so the letter D is at the center of the word sending so I'm just going to start stamping the word sending by stamping first the letter D so I am having a baby wipe ready to go and I'm going to stamp D at the center and then I'm going to slowly go and stamp all the other letters as I'm stamping everything I make sure that I connect those little tails at the end of each letter and this way I have a nice script letter as if it was hand written so notice how I use one letter I stamp and then wipe it out on my baby wipe place it back at its place and then move on to the next letter and I'm going to do the same thing for spelling out the word love underneath and now I have my pattern ready to go I am going to add some tape adhesive at the back and stick it directly on top of this card base this is a red cardstock that I have folded to be a top folded card that's four and a quarter by five and a half you can add some shine on the cards if you like so but I decided to leave it as it is clean and simple for this card I'm working just with dynamics to create my little card these are the mailbox dies I have also used those clouds from the cloud nine and also one of the slopes from the stitched scallop basic edges I have worked to cut them out just by using plain cardstock so white for the clouds green for the grass I decided to have my mailbox red so I just went ahead and cut out all the pieces with my scissors machine and all I have to do now is to assemble my card adding some tape adhesive at the back and I am sticking one on top of the other now for the mailbox just because I want to have the letters coming from the inside I am going to stick the basic part at the top of my card but for the top part I am going to use some foam tip at the back this is going to create some dimension which is going to have the actual box a little bit raised you will see what I mean at the moment so I am going to cut out just thin strips of foam tape to go all around it I am then going to peel it off and stick it on top of my box so I have an opening at the front to stick the letters inside now although you cannot see it at the moment the white little pieces that I have there are the letters and they actually have some embossing on top of them so they are not just white rectangles you can tell that in real life but it's so hard with all the lights that I have in my studio so I am sticking down the clouds and to make my letters cuter I have punched out tiny little hearts from the same cardstock that I have used for the mailbox and I am sticking them on top to close my letters I am just fighting with those tiny little pieces and my glue pen and then I am going to place them inside that box now again remember that this is slightly raised which allows me to place the letters inside now for my sentiment I went ahead and cut out a banner to cut it out I used white cardstock with the stitch sentiment strips and I am also going to use the lavish in the mail stamp set and stamp happy mail I added some foam tape I am going to cut out what sticks out place some tape at the back and I am going to place that directly on top of my card base and this is going to complete my card and for this card I only stamped the sentiment everything else is just cut out by using the dynamics dies now let's make a fun card this die is called flop card heart you have to take it apart it's so much fun now I am going to make sure that this is going to be placed at the center add just some post it to hold it in place I am going to open it up don't forget to open this up otherwise you are going to cut out the back of your card base and I am going to run it through my Cessics machine now notice how this is not going to cut all the way through it's only going to cut around the heart but it is going to give you those score lines and your flip card is almost ready so all you have to do now is to embellish it so I am going to use the other part of this die the heart and I am going to cut out hearts out of this cardstock and once I have my hearts ready they give you a beautiful stitching all around those hearts I am going to stick them directly on top of that shape or my flip card and I am going to do the same thing at the back and it's looking beautiful already now for the sentiment I am going to go with the one that says guess who's missing you and this comes from the owl's set I am going to stamp it directly on top of this banner that I have cut out again I used the dynamics dies for cutting out this banner and I guess that this is one of the dies that I use all the time I think it's very handy to have one of these to stamp your sentiments so anyway I am going to stick that directly on top of my heart I am going to add some foam tape at the back and now on the inside of my card I want to have this heart again but I want it to be placed at the exact same position as the other hearts so I am going to place it on top of the other one close the flap and my card is at the exactly same position so now all I have to do is to stick there one little owl I am deciding to use this one because I just love her eyelashes I am going to stamp it with memento ink and I am going to color it with my alcohol markers I used my spectrum noir markers to do so so my owl is already cut out and I have also used the arrow and one more of those banners that I use all the time to stamp my sentiments so the whole sentiment from that stamp set says guess who's missing you but I didn't stamp the word me on the outside and I am going to stamp it on this tiny little banner that my owl is going to hold now if you see here a little hand let's say it's a hand is sticking out so I am going to give her that arrow to hold and this arrow is going to be a little flag actually with that banner sticking out now as I am going to stick everything down I am going to make sure that nothing is going to show from the front when you close the card you won't be able to see anything so it's a nice little surprise I think this card also came out really adorable and I just cannot stop playing with it now anyway I just couldn't leave it as it is I wanted to add some glitter on the owl so I am using my Nuvo glitter drops this is going to dry clear but it adds glitter on top and my card is ready for this card I am going to use this beautiful background and I am going to do some embossing now of course you can stamp the beautiful background and if you love coloring just use your favorite method and you will see that you get a beautiful design so now I am going to place my white cardstock on top I am going to press it with my fingers I am making sure that I am not moving the paper at all I am going to peel it off and now I have a nice impression but you cannot see it it's actually there and then I am going to apply some gold embossing powder and you will see the beautiful design that you get I am going to hit set everything and I hope you can see the beautiful clothes that I get so this is going to be the background for my card and I am going to use the big haxa dynamics die to cut out those letters and of course I am going for a shaker card you know already that I always go for at least one shaker card when I am making more than one cards in a video so I am adding my tape all around those windows I am making sure that everything is going to stick nicely and then I am going to add on top a piece of acetate I used foam tape to go all around the window and now I am adding some sequins and this is a sequin mix in gold so I am going to cover up the window and I have covered it up with gold paper and I am going to add some tape at the back of this window and stick it directly on top of my card base for my card base I have chosen this gold cardstock which is going to go beautifully with the sequins as well as the gold embossed background and my card is ready now this is going to be a fun card and it is perfect for those little boys in your life and I am going to use these dynamics dies this is called castle and of course I am going to build my own castle so I have cut out the wall I am going to cut out the towers and bits and pieces from the dynamic set and now I am marking where this window is going to fall and from the tower and I am going to use my craft knife and I am going to cut out the top of my card front and the idea is to be able to see on the inside of the card from the top as if it is a continuous scene you will see what I mean later on so I am just chopping off the top of my card front you can see how it is looking at the moment now I have all the bits and pieces ready to go for my castle and since this is a castle I wanted to add some texture on it so I decided to use the wall stencil by Tim Holtz which I am going to apply on top and with my finger dabber I am just going to add a little bit of ink I am not going very heavily over it I just want to have a little bit of texture I am going to do that on the wall as well as on all the towers so I have stenciled everything and you can see how my castle parts are looking at the moment I am going to stick the top of the towers where they belong so as you can see I have cut out parts of my castle using a lighter and a darker shade of gray and now it is time to assemble my card and as I am placing everything on top of my card notice how I am going to do the exact same thing at the back so whatever is in the front and you won't be able to see all those ugly pieces sticking out and this is going to cover up the part that I have chopped off so now I am going to stick down the doors one at the front and one at the back and at the bottom of my castle I am going to stick some green pattern paper so that I have the grass and this is going to complete the scene at the front and at the back now for the inside of the card I am going to add some broken china to create the sky I am applying it with my blending tool and I am also going to stick the grass there notice how I am going to align the grass on the other side as if it is a continuous line so I have cut out this hill side by using the stitched edges I am going to cut out the excess with my scissors and stick some clouds to my sky these again are cutouts by using the cloud 9 dies and I like how you can see the sky from the front and not only on the inside now I am going to add the focal point which is going to be a night so I am going to stamp this night on his horse I am going to color him the spectrum noir markers and then I am going to cut him out but first I am going to stamp the sentiment and for that I am going with one sentiment that was included in the stamp set I used black ink to stamp the sentiment and it says you are my knight in shining armor so after using my spectrum noir markers I have my knight ready to go I am going to stick him down on the inside of the card and just because the sentiment says shining armor I am going to add some shine on this and for that I am using my silver gel pen now I am not going to put anything else on the front but you can go ahead if you like and add even more elements like the dragon for example at the front and we are all ready to card 8 for today so for that I am going for a princess card I am going to stamp the princess her castle little bits and pieces from this stamp set and I am going to color everything with my spectrum noir markers I am going to use the dynamic set that matches perfectly these dies to cut them out and again I have cut out my hillside just like I did for the previous card as well as the clouds from cloud 9 stamp set and now it's time to assemble my card I am going to stick the grass on top of a pale blue cardstock I am going to stick the castle at the background and I am tucking it in underneath the grass as if it is far away at the background and for the princess I am adding a little bit of foam tape at the back of her so this is going to pop here at the front and add a little bit of dimension to my card I am adding a tiny little foam square as well on her tiny friend that little bird as well as on the butterfly I have chosen one of the sentiments that says happy birthday I hope it's magical which I am going to stamp directly on top of my sky with blocking and now I am going to surround that sentiment to complete my scene with some of those clouds and I am going to stick this panel on top of my card base which is a standard card that's 4.25x5.5 in white and you simply can't have a princess card without some glitter so just head to add some the castle, the princess their crowns and this is going to complete the card and now let's take a quick look on all the cards that I made today and these were the cards for today I hope you had fun and good inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel Create8 is going to come back on February featuring the next release by my favorite things Thank you all for watching