 What is happening all you crazy tool peeps? Thanks for tuning back into the channel today, right here with the Rust Belt mechanic. As you guys can see, another episode rocking here with Rust Belt's Nifty Tools of the Week. We've got some really awesome things to show you guys here today, some of which are actually pretty new to the market. And one of the other things that you guys are gonna like is some discount coupon codes to be able to enjoy with these also. So make sure you stay tuned, let's get into some tools. First we come to our Nifty Tools of the Week is gonna be our Master Oil Funnel Kit. This is by Motivex Tools out of Washington State. This is a 16 piece oil fill and funnel kit. It's gonna be the Master Kit, which is gonna include about 90% of pretty much any vehicle that you guys can think of when it comes to filling those engines with oil. Now this Master Kit comes with all kinds of different adapters, three different funnels, as well as some universal joints here for it as well. These clear adapters right here are gonna actually screw onto the blue housings, which is your initial funnel here on top. And these clear adapters are either going to thread in to your standard oil fill ports or click lock in to those half twist turnstiles as well. They come out with some really nice rubber seals on it so it's not gonna leak past those seals. And then as well as all these really cool adapters along with it, everything from these two prong, little adapters that go onto the very older style with the metal little engagement points for those older engines, as well as some of the newer things that are kind of off brand, like on those Hondas, the vans and the odysseys that are really hard to get to the oil fill spots. They're really down load in a weird angle. Got some adapters for those as well. Now, if you run into that circumstance where the funnel or the adapter that you have for the vehicle, it just doesn't happen to be in this kit, there's a universal one as well. It's this little spring-loaded adapter right here. Screws and locks into one of these funnel adapters right here so you still have the nice clear adapter and then it's gonna be this nice spring-loaded handle. So you can put it into that housing, let go, release the little trigger here on the end and it's gonna spread itself apart so it goes into that little opening and puts the spring tension and holds that funnel into place. I think this kit's a really great idea, especially for the guys who are doing lube oil and filters all day long and you're tired of getting that nasty mess all over a customer's car. Well, this takes the questions out of the game and gives you a nice comprehensive set to be able to do those oil changes for you. Part number on this one is gonna be MX2300-16, like I said, a 16-piece set. And over on their site, it's actually gonna be running 99.95 as their standard price. But you know what? They decided they're gonna do one better. They're gonna give you guys a discount code just for being the fans of Rust Belt Mechanic. So in check out, if you guys put promo code Rust Belt, you guys are gonna get an additional 10% off this kit. And already at just a hundred bucks at how high a quality this really is, I think you guys are gonna be really happy with this and I would definitely recommend for you guys to pick up one of these tools. Second up on the list, we also have another tool here by Motivex. This is the Motivex Large Trim Tool MX2603. This is the large panel and pry tool that is also non-marring. It's a plastic polymer, pretty rigid, but still is not gonna be one of those really hard metal pry tools. What I really like about this is the size. For those door panels that have those clips that are really far in there, you're not able to get them. It comes with a nice, looks like about a 30-degree angle on the one end with the V-clip to get around those stupid little Christmas trees, as well as a standard straight, flat pry in on the other side. Really rigid, some nice little grooving here in the middle to get a nice grip onto it. And this thing, I've used it twice now on some of the Chevy conversion vans that have those Christmas trees way in there. And this thing works fantastic. And what I like about it is the fact that it is non-marring, but it is very rigid. Like this thing, it's a tough tool. Whereas if you're trying to do it with one of these tools right here to get some of those big pry panels, they're just floppy fish in the wind and that is not gonna pull those heavy Christmas trees apart. So this one is also available over at MotivexTools.com, and this one's gonna be at the killer price of only $14.95. Save you the headaches of all those nasty door trim panels and pick you one of these up as well. I will be sure to have all the descriptions for these tools in the description as well. Third up for these rock and nifty tools is gonna be this nice magnetic tray set by Blue Point or Snap-On. Now when's the last time that you heard a Snap-On tool coming in at under $60 that was really worth your time and money? Not too often does that happen, but they really knocked it out of the park in this one. This one is gonna be a four-piece set. Part number on this one is gonna be BLPMPTSETA. Nice long part number for you guys to remember, but I will put that one down in the description below as well. Like I said, four-piece magnetic tray set and this thing is gonna be awesome for you guys that have these carts like this one, the ones with the flip-up trays and these things are gonna have a nice big magnetic band here to the back of it. Now it's not gonna be one of those hard magnets with rough slid or head corners that are gonna scratch into your box or anything. This is actually kind of a softer surface onto it as to not scratch your box. Comes with the four-piece set. I believe we have an eight inch, a 12 inch, a 10 inch and a six inch. So all four different sizes here for you. I like personally to put them on the inside of this tray right here. When I flip the lid up, put it against the lid. The other thing that a lot of the guys you like to use these for is to put these on the corners of your rack to be able to hold all your lug nuts, maybe some brake parts, hardware. Anywhere you guys can stick this, these things are gonna be absolutely amazing. And at only like 58 bucks. 58 bucks, you can pick up this set from Snap-on. Now the other thing that I found was kind of a hassle. They put these out and they realized these are a good price. Lots of guys started buying them and they might be a little bit hard to get. But if you can get your hands on a set of these, I would definitely recommend for you guys to pick them up. Great buy for the money. And then last but certainly not least on this week's Nifty Tools is gonna be the new Blue Point Underhood Service Tray. This one is gonna be part number BLP-U-H-S-T-P-C. Now this one at the price that it is, I think it is a fantastic buy personally for what I do. I like to have my service cart all nice and full of tools. But again, what do I do with all the little parts and the other little things that come off the engine bay? I don't want to really set them on the ground or around on the rack. So this is the perfect alternative to that. You don't always have a roll-around tray available in the shop or a bench that you're easily accessible at especially if when you're doing things across the shop. This tray was perfect for that. Now running at $225 normally, I actually picked this one up at $250 this last week on my truck is a fantastic buy. It's fully adjustable height-wise. You're able to turn the little adjustment bar here on the very end. It's got a nice padded side to it where it won't allow you to scratch the end of the fender or something that you're setting it against. And it's able to adjust up and be able to slide over the hood area where you're working at. The inside portion of this does have some nice really easy foam slide in trays area. So it's not just straight metal to metal scratching it up maybe rusting it over time as well as the thing that I really like is it has this nice rubber bumper around the entire tray. On top of that, it's got six holes here in the end to be able to either put screwdrivers or pry bars whatever you need can slide right through it on down through, hold all the tools and or parts nice and divided, nice and neat underneath that hood that you guys really need. I definitely have enjoyed this one over the last week and a half or so. I would definitely recommend for you guys to pick this up especially if you are some OCD mechanics like I am like to keep everything all nice and neat and organized underneath the hood of the car. It's a great tool to pick up. Now I know it's hot in here but we got some really hot tool deals here going and I decided, hey let's throw in one more for the week. I ended up picking this one up. This is another Motivex tool special here for you. Now a lot more of the information will come on this one. If you guys go over and check out toolheadscrate.com that's the monthly tool subscription service that myself, Mr. JRC54 and Captain Ron have been putting on over the last four or five months. This is actually going to be one of this month's golden tools. Thanks to Motivex they are sponsoring this month's golden tool awards and actually we're gonna have not one, two but we're gonna have three of them. This particular set right here is gonna be their three eighths socket and ratchet master set. Comes with all you see here. We've got all the way from six up to 24 millimeter. Got a nice ratchet, three extensions, a spring loaded swivel and a couple of adapters all within this nice fancy phone molded case right here for you. Now these are some pretty killer kits. It's a really nice fine tooth ratchet very heavy duty to it as well. Nice little contour, metal here for the selector switch and everything is also really well finished on the outside because here along the outsides it's all gonna have this really neat knurled grooving. So if you have these things and you put them on your tray they're either gonna end straight up like that every time and they're not gonna roll around they're gonna end up stopping. I think it's really cool that you stop it and it's gonna land pretty much up every time. So this kit, make sure if you wanna see more on this one it's not actually gonna be out yet over on Motivex's site for the next week or so. They do have the quarter inch set available but the three eighths and half inch will be coming very soon. And so if you guys wanna get your hands on these early possibly get your chance in getting a couple of sets for free. Make sure you go on over to www.toolheadscrate.com and give those a check out as well. Make sure you check out our Instagram page as well. We're running some really cool deals on there. Some promotions for tagging people you might even get yourself a free tool heads crate on top of that. Well guys, that's about all I've got for you today in the way of some nifty tools. Now I wanna give you guys a big thank you and give yourselves a nice big pat on the back for giving us so much support right here on the channel. Breast Belt Mechanic channel here with myself and my family, we've been doing amazing and the views and all the support has been coming through in just truck loads. It's been absolutely amazing to see you guys putting that much into this channel and helping us out to be able to get you guys some amazing content as well. We've got all kinds of projects all kinds of tools coming out here really soon. We're working with a bunch of companies to be able to get you guys this much nifty tools, need information and really cool builds on top of that coming up here real soon. Make sure you guys hit that like button. Make sure you guys subscribe and turn on the bell notification to get notified when I come out with cool awesome videos like this one right here. I appreciate it. Thank you again and as always, you guys stay awesome.